[Chinese-volunteers] Why my SHELL(ash) does not work on 386SX , mayday...mayday...!

[罗智]

My system is made with linux kernel 2.4.20 ＋ busybox1.1.0 ＋ RootFileSystem which is manually

created. it's ok on several PC .

When I move this system to my embedded computer (CPU：ALI 6117，includes 386SX ) , problems

occurred.

The kernel works ok on the embedded system , I think ,during the booting .the /etc/init.d/rcS is

ok ,too. the embedded system stop when shell should get out and show shell prompt.

 

I have tried three /etc/inittab :

1:tty1::respawn:/sbin/getty 38400 tty1
   Embedded system show "login:",but when I insert username and press enter ,"login:" come out

again. no shell prompt show out.
2:tty1::askfirst:/bin/sh
   Everything is ok when booting , system go into " Please press Enter to activate this console".
but this statement show again when I press enter. system still can't go into shell.
3:tty1::respawn:/bin/sh
   the phenomena is nothing . booting is ok , but nothing show out at last . system idles there,
Can not go into shell!

 

In a word , shell can't work correctly, I hope experts can give me some advice.

 

thank you very much

 

---

luozhi	2006-04-29
Email:address@hidden	16:45:11

---