[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Tlf-devel] back to TLF

From: Rein Couperus
Subject: Re: [Tlf-devel] back to TLF
Date: Wed, 14 Apr 2004 08:22:45 +0200
User-agent: KMail/1.5.4

You will get the same problem with the paddle inputs....  you have to 
implement an input loop for that anyway.
The foot switch does the same as setting PTT (in hardware).
I guess 10 ms would be a better value...
Pin 15 is connected with a pull-up resistor to pin 14, which is normally high.
The foot switch pulls it to grnd.

Rein Pa0R

On Wednesday 14 April 2004 07:11, Wolf-Ruediger Juergens wrote:
> On Tuesday 13 April 2004 23:24, Rein Couperus wrote:
> > The foot switch is on pin 15...
> > It is used like the PTT switch (so include TXDelay)...
> Rein,
> But its a input, so cwdaemon has always to watch the port in a endless
> loop or in a defined time slice. Would  be 100ms ok?
> 73 Wolf, DL2WRJ
> _______________________________________________
> Tlf-devel mailing list
> address@hidden

address@hidden or address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]