[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [STUMP] can't use second screen
From: |
Michael Stevens |
Subject: |
Re: [STUMP] can't use second screen |
Date: |
Fri, 2 May 2008 09:59:14 +0100 |
2008/4/29 Bob Farrell <address@hidden>:
> I've never tried it with xinerama, but I run Stump on two heads with
> mergedfb, which seems to simplify things a lot. Here's a section from
> my /etc/X11/xorg.conf:
>
> Section "Device"
> Identifier "ATI Technologies Inc M22 [Radeon Mobility M300]"
> Driver "ati"
> BusID "PCI:1:0:0"
> Option "DynamicClocks" "true"
> Option "VBERestore" "true"
> Option "backingstore" "true"
> Option "RenderAccel" "true"
> Option "VideoOverlay" "on"
> Option "OpenGLOverlay" "off"
> Option "XAANoOffscreenPixmaps" "true"
> Option "UseInternalAGPGART" "no"
> Option "MergedFB" "true"
> Option "CRT2Position" "LeftOf"
> Option "MergedNonRectangular" "true"
> Option "SWCursor" "true"
> Option "CRT2HSync" "30-69"
> Option "CRTVRefresh" "47.5-125"
> Option "MetaModes" "1680x1050-1280x1024"
> EndSection
Thanks for the help, but I've worked it out now. it was user error - I
hadn't realised each head would start as separate frames, and was
searching the documentation for ways to switch heads with no luck.
Michael
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [STUMP] can't use second screen,
Michael Stevens <=