Re: [Slackware.it] RE: cdrecord e kernel

[ulisse rubizzo]

E prova dunque con la tripletta di numeri che lo scanbus ti ha fornito
per l'operazione per i dispositivi ATAPI
cdrecord dev=0,0,0 (e' il bus number, target number o se vuoi lo slot,
e l'unita' logica)

On 3/22/07, Claudio Chicco <address@hidden> wrote:
>  # cdrecord -v nosinglesession dev=hdc /usr/local/DocUser
>
>  la soluzione dovresti averla scritta proprio tu, è qui:
>
>
>  > cdrecord: No such file or directory. Cannot open 'hdc'. Cannot open SCSI
> > driver.
>
>  prima di tutto: esiste /dev/hdc? se non usi udev, sei sicuro che il
> tuo drive sia hdc? e poi, hai provato con dev=/dev/hdc ?
>
>
> address@hidden:/home/claudio# cdrecord -v nosinglesession dev=/dev/hdc
> /usr/local/DocUser
>  cdrecord: No write mode specified.
>  cdrecord: Asuming -tao mode.
>  cdrecord: Future versions of cdrecord may have different drive dependent
> defaults.
>  cdrecord: Continuing in 5 seconds...
>  Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> Schilling
>  TOC Type: 1 = CD-ROM
>  scsidev: '/dev/hdc'
>  devname: '/dev/hdc'
>  scsibus: -2 target: -2 lun: -2
>  Warning: Open by 'devname' is unintentional and not supported.
>  cdrecord: Read-only file system. Cannot open '/dev/hdc'. Cannot open SCSI
> driver.
>  cdrecord: For possible targets try 'cdrecord -scanbus'.
>  cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>
>  e per finire: con cdrecord puoi masterizzare una cartella così a muzzo
> (supponendo DocUser uan cartella e non un file iso senza estensione)?
> è un po di tempo che non lo uso ma mi pare strano.
>
> Sì, è una cartella
>
>  Mi posteresti per piacere l'output dei due seguenti comandi?
>
> # cdrecord -scanbus
>
>
>
>
> address@hidden:~$ cdrecord -scanbus
>  Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> Schilling
>  cdrecord: Permission denied. Cannot open '/dev/sg0'. Cannot open SCSI
> driver.
>  cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
> root.
>  cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>  address@hidden:~$ su
>  Password:
>  address@hidden:/home/claudio# cdrecord -scanbus
>  Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> Schilling
>  cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open
> SCSI driver.
>  cdrecord: For possible targets try 'cdrecord -scanbus'.
>  cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>
>
>  # cdrecord dev=ATAPI -scanbus
>
>
> Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
> Schilling
>  scsidev: 'ATAPI'
>  devname: 'ATAPI'
>  scsibus: -2 target: -2 lun: -2
>  Warning: Using ATA Packet interface.
>  Warning: The related Linux kernel interface code seems to be unmaintained.
>  Warning: There is absolutely NO DMA, operations thus are slow.
>  Using libscg version 'schily-0.8'.
>  scsibus0:
>          0,0,0     0) 'Slimtype' 'COMBO LSC-24082K' 'JCK1' Removable CD-ROM
>          0,1,0     1) *
>          0,2,0     2) *
>          0,3,0     3) *
>          0,4,0     4) *
>          0,5,0     5) *
>          0,6,0     6) *
>          0,7,0     7) *
>  Saluti e grazie a tutti Claudio Chicco
> www.panificiochicco.it
>
> _______________________________________________
> Slackware.it mailing list - http://www.slackware.it
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/slackit-ml