sipwitch-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Sipwitch-devel] Sipwitch Secure,P2P


From: johnc
Subject: Re: [Sipwitch-devel] Sipwitch Secure,P2P
Date: Fri, 15 Mar 2013 12:50:21 +0000
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0.12) Gecko/20130116 Icedove/10.0.12

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

To say that sipwitch is P2P is laughable.

It is a sip server. Both parties have to set up and configure a
sipwitch sip server and register with it using a sip client such as
twinkle, jitsi etc. to call each other. The media is directly bridged
but the signaling goes through the servers.

The documentation is dire and the community using it is relatively small.

Kamailio or repro will allow for secure communications and
inter-domain dialing. i.e. federation which is probably what you are
after. They have good documentation, are open source and  have active
development and users communities.

Some links to get you started:

http://freeyourspeech.org/do-they-federate/
http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour
http://www.opentelecoms.org/federated-voip
http://www.rtcquickstart.org/sip-proxy-installation/repro

Sipwitch sucks, please remove me from this list!

- -John

For a simple config see this simple manual:
http://forums.debian.net/viewtopic.php?f=16&t=76620. Unfortunately
sipwitch does AFAIK *only* work on your internal network.

Am 15.03.2013 08:07, schrieb Steve Murphy:
> On 03/15/2013 03:57 AM, liangliang wrote:
>> Hi: Why say sipwitch "secure"?
> Because you can use ZRTP to encrypt the channel .   Not all SIP
clients support this .  Twinkle is one that does.
> 
> 
>> Why say sipwitch is p2p ?How to acheive the P2P? Thank you!
> SIP itself is a P2P protocol.
> 
> Have you read any of the documents that people have been kind
> enough
to provide for sipwitch?
> 
> I'll write you a short and very  simple  document:
> 
> HOW TO ACHIEVE P2P WITH SIPWITCH
> 
> 1) Register two SIP clients/phones  with sipwitch 2) From one
> client call the other client. 3) Pick up the call on the client
> that is ringing.
> 
> BINGO!  You have P2P!
> 
> 
> 
> 
> 
> 
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=gkkP
-----END PGP SIGNATURE-----



reply via email to

[Prev in Thread] Current Thread [Next in Thread]