Re: [RULE] Summary of PCMCIA problems in Red Hat

[M. Fioretti]

On Mon, May 31, 2004 19:06:09 PM +0200, M. Fioretti
(address@hidden) wrote:
> 
> The relevant output of lspci -vvb on Red Hat 9 is:

> Interrupt: pin A routed to IRQ 255

This was with the original /etc/pcmcia/config.opts created by RH9 (see
below). With the modified one (appended last) those IRQ 255 become IRQ
0. 

One of the pages I mentioned says the cardbus bridge is on IRQ 11. How
to modify the include/exclude statements to make it visible?

TIA,
        Marco F.

########################################################################
#
# ORIGINAL Local PCMCIA Configuration File
#
#----------------------------------------------------------------------

# System resources available for PCMCIA devices

include port 0x100-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff

# High port numbers do not always work...
# include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
include port 0xa00-0xaff

# Resources we should not use, even if they appear to be available

# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
# PS/2 Mouse controller port, comment this out if you don't have a PS/2
# based mouse
exclude irq 12
# Radeon ICP MCE's if you touch ports 380 to 3ff
exclude port 0x380-0x3ff

#----------------------------------------------------------------------

# Examples of options for loadable modules

# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"

# Options for IBM Token Ring adapters
#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"

# Options for Raylink/WebGear driver: uncomment only one line...
# Generic ad-hoc network
module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 
translate=1"
# Infrastructure network for older cards
#module "ray_cs" opts "net_type=1 essid=ESSID1"
# Infrastructure network for WebGear
#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 
beacon_period=256"

# Options for WaveLAN/IEEE driver (AccessPoint mode)...
#module "wvlan_cs" opts "station_name=MY_PC"
# Options for WaveLAN/IEEE driver (ad-hoc mode)...
#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"

# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"


#####################################################################
#####################################################################

#
# MODIFIED AS SEEN ONLINE Local PCMCIA Configuration File
#
#----------------------------------------------------------------------

# System resources available for PCMCIA devices
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0xc0000-0xfffff, memory 0xa0000000-0xa0ffffff
exclude port 0x230-0x233

# Resources we should not use, even if they appear to be available

# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
#sound card
exclude irq 5
# PS/2 Mouse controller port, comment this out if you don't have a PS/2
# based mouse
exclude irq 12
# Radeon ICP MCE's if you touch ports 380 to 3ff
exclude port 0x380-0x3ff

#----------------------------------------------------------------------

# Examples of options for loadable modules

# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"

# Options for IBM Token Ring adapters
#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"

# Options for Raylink/WebGear driver: uncomment only one line...
# Generic ad-hoc network
module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 
translate=1"
# Infrastructure network for older cards
#module "ray_cs" opts "net_type=1 essid=ESSID1"
# Infrastructure network for WebGear
#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 
beacon_period=256"

# Options for WaveLAN/IEEE driver (AccessPoint mode)...
#module "wvlan_cs" opts "station_name=MY_PC"
# Options for WaveLAN/IEEE driver (ad-hoc mode)...
#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"

# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"



-- 
Marco Fioretti                 mfioretti, at the server mclink.it
Red Hat for low memory         http://www.rule-project.org/en/

There are tasks that cannot be done by more than ten men, or less than
one hundred