[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RULE] What should go in the RULE install guide?
From: |
Da Worm |
Subject: |
Re: [RULE] What should go in the RULE install guide? |
Date: |
Sun, 30 Mar 2003 03:18:33 -0500 |
>...are you familiar with insmod,
No, but I could look it up if I knew that I needed it.
>ifconfig,
I have used this once or twice before in my experiments with Linux, but claim
zero expertise.
> & wget?
No, but again, I could look it up if need be. Google is my friend.
> Do you know how to write a bash script using a for-loop?
I am not sure why a for loop would be necessary to load a network driver, and
use this to start an FTP install. Back at some 6.x Redhat, I managed it
without ever writing anything in Bash, but that was on a system fully
supported. I no longer have such a system for any current distro, hence my
interest in RULE.
>Do you have the correct modules copied onto disk 2?
When copying from a windows environment, the files are not correctly marked as
executable. I suppose this is what insmod is for, but have yet to look it up,
as I had no knowledge that I needed to. Perhaps this is the clue that I need.
I don't want to sound arrogant, but I have been using computers since the days
of CP/M, DOS, and most Windows flavors. I have installed and discarded several
versions of BSD and Linux, discarded mainly because there was no documentation
readable by the uninitiated. Bash windows all you want, but man pages still
don't hold a candle to the windows help system. Five years of trying, off and
on, has led me to believe that things are finally getting better, so I am
trying again. But if this project hopes to attract those who know nothing, at
least it should be able to help those who know just a little. If a computer
professional who hasn't yet learned Linux can't get the system installed, then
someone who has never even heard of it hasn't a chance.
I'll be happy to write up a "noobies guide" if only I could get past the
initial hurdles. I know I need a network driver on the boot disk (or the
secondary driver disk). I have found the scripts to modify to load this
driver, and the command line parameters to pass to it. What I don't know is
how, from a windows box, to get the driver on the disk in such a way as I can
run it. Once there, and once it can be ran, I am sure I can continue on with
an FTP installation (since I have no CD-ROM to install from on the target
machine). Its just getting there that is causing me grief.
Jeff.
*********** REPLY SEPARATOR ***********
On 3/29/2003 at 1:56 PM Eugene Wong wrote:
>>From: Da Worm <address@hidden>
>>
>>Could someone post info on how to install via FTP? Especially how to get
>>the network drivers onto floppy for the initial boot phase, when one
>starts
>>with only a windows box?
>
>Hi Jeff.
>
>I personally think that it is quite complex.
>
>Just so that I know where you are coming from, are you familiar with
>insmod,
>ifconfig, & wget? Do you know how to write a bash script using a for-loop?
>Do you have the correct modules copied onto disk 2?
>
>_________________________________________________________________
>Tired of spam? Get advanced junk mail protection with MSN 8.
>http://join.msn.com/?page=features/junkmail
>
>
>
>_______________________________________________
>Rule Project HOME PAGE: http://www.rule-project.org/en/
>Rule Development Site: http://savannah.gnu.org/projects/rule/
>address@hidden
>http://mail.nongnu.org/mailman/listinfo/rule-list
Re: [RULE] What should go in the RULE install guide?, Eugene Wong, 2003/03/30
Re: [RULE] What should go in the RULE install guide?, Michael Fratoni, 2003/03/30
Re: [RULE] What should go in the RULE install guide?, Michael Fratoni, 2003/03/30