qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-stable] [RFC for-2.8] machine: Convert abstract typename on co


From: Greg Kurz
Subject: Re: [Qemu-stable] [RFC for-2.8] machine: Convert abstract typename on compat_props to subclass names
Date: Wed, 7 Dec 2016 15:58:48 +0100

On Wed, 7 Dec 2016 11:59:17 -0200
Eduardo Habkost <address@hidden> wrote:

> On Wed, Dec 07, 2016 at 02:39:25PM +0100, Greg Kurz wrote:
> > On Tue, 6 Dec 2016 17:31:59 -0200
> > Eduardo Habkost <address@hidden> wrote:
> >   
> > > On Tue, Dec 06, 2016 at 05:19:52PM -0200, Eduardo Habkost wrote:  
> > > > On Tue, Dec 06, 2016 at 06:50:47PM +0100, Greg Kurz wrote:    
> > > > > Since commit "9a4c0e220d8a hw/virtio-pci: fix virtio behaviour", 
> > > > > passing
> > > > > -device virtio-blk-pci.disable-modern=off has no effect on 2.6 machine
> > > > > types because the internal virtio-pci.disable-modern=on compat 
> > > > > property
> > > > > always prevail.
> > > > > 
> > > > > This should ideally be fixed in the qdev properties core code, but it 
> > > > > is
> > > > > too late in the QEMU 2.8 schedule. So this patch fixes the issue by 
> > > > > setting
> > > > > the compat properties for every virtio-*-pci subtypes instead of the 
> > > > > base
> > > > > virtio-pci type.
> > > > > 
> > > > > Signed-off-by: Greg Kurz <address@hidden>    
> > > > 
> > > > So, it looks like the bug is present in many other cases...
> > > > 
> > > > I have hacked QEMU to print a warning in case the driver name in
> > > > compat_props refer to an abstract class or a class that have any
> > > > subclasses. The results are below:
> > > > 
> > > >  apic-common.legacy-instance-id set for abstract class
> > > >  apic-common.vapic set for abstract class
> > > >  i386-cpu.arat set for abstract class
> > > >  i386-cpu.check set for abstract class
> > > >  i386-cpu.cpuid-0xb set for abstract class
> > > >  i386-cpu.fill-mtrr-mask set for abstract class
> > > >  i386-cpu.full-cpuid-auto-level set for abstract class
> > > >  i386-cpu.l3-cache set for abstract class
> > > >  i386-cpu.pmu set for abstract class
> > > >  pci-device.command_serr_enable set for abstract class
> > > >  pci-device.rombar set for abstract class
> > > >  pci-device.x-pcie-lnksta-dllla set for abstract class
> > > >  powerpc64-cpu.pre-2.8-migration set for abstract class
> > > >  s390-skeys.migration-enabled set for abstract class
> > > >  spapr-pci-host-bridge.ddw set for superclass
> > > >  spapr-pci-host-bridge.dynamic-reconfiguration set for superclass
> > > >  spapr-pci-host-bridge.mem64_win_size set for superclass
> > > >  spapr-pci-host-bridge.mem_win_size set for superclass
> > > >  spapr-pci-host-bridge.pre-2.8-migration set for superclass
> > > >  usb-device.full-path set for abstract class
> > > >  usb-device.msos-desc set for abstract class
> > > >  virtio-pci.disable-legacy set for abstract class
> > > >  virtio-pci.disable-modern set for abstract class
> > > >  virtio-pci.migrate-extra set for abstract class
> > > >  virtio-pci.page-per-vq set for abstract class
> > > >  virtio-pci.virtio-pci-bus-master-bug-migration set for abstract class
> > > >  virtio-pci.x-disable-pcie set for abstract class
> > > >  x86_64-cpu.arat set for abstract class
> > > >  x86_64-cpu.check set for abstract class
> > > >  x86_64-cpu.cpuid-0xb set for abstract class
> > > >  x86_64-cpu.fill-mtrr-mask set for abstract class
> > > >  x86_64-cpu.full-cpuid-auto-level set for abstract class
> > > >  x86_64-cpu.l3-cache set for abstract class
> > > >  x86_64-cpu.pmu set for abstract class
> > > > 
> > > > I believe the cases where we are likely to cause real-world bugs
> > > > are virtio-pci and the *-cpu classes (because -cpu is translated
> > > > to -global).
> > > > 
> > > > I'm not sure what should be the right fix in 2.8. I am
> > > > considering a temporary hack to translate abstract class names in
> > > > compat_props to global properties for all subclasses, in case
> > > > they refer to an abstract class. This way we fix the bug where
> > > > -global doesn't override compat_props properly, but keep the
> > > > rules for -global untouched.    
> > > 
> > > What about this?
> > >   
> > 
> > Indeed that would have been a clever workaround but it is too late anyway. 
> > :)
> > 
> > BTW, that makes me think about Halil's comment in another mail, even if it
> > is not strictly related to the comapt issue (but rather because I mentioned
> > it in the changelog of my first patch):
> > 
> > "So I can't even tell if -global virtio-pci.disable-modern=off is even legit
> > on the command line."
> > 
> > And indeed, -device doesn't accept abstract classes... shouldn't -global
> > prohibit setting properties for them ?  
> 
> I'm not sure. Setting disable-modern for all virtio-pci devices
> with a single -global option sounds very useful, for example.
> 

Indeed but, unless I've missed something *again*, you cannot know about
it without reading the code... maybe this calls for a '-global help' option
to list them all ?

> Also, if we start rejecting it we risk breaking existing
> configurations. We would need to deprecate it first (making it
> print a warning) and reject it a few releases later.
> 

This would be an undocumented configuration but I get your point, so
it's probably better to keep it... especially if it's useful :)

Cheers.

--
Greg



reply via email to

[Prev in Thread] Current Thread [Next in Thread]