qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-ppc] [PATCH qemu v4 1/3] spapr_iommu: Do not replay mappings from


From: Alexey Kardashevskiy
Subject: [Qemu-ppc] [PATCH qemu v4 1/3] spapr_iommu: Do not replay mappings from just created DMA window
Date: Thu, 7 Mar 2019 16:05:16 +1100

On sPAPR vfio_listener_region_add() is called in 2 situations:
1. a new listener is registered from vfio_connect_container();
2. a new IOMMU Memory Region is added from rtas_ibm_create_pe_dma_window().

In both cases vfio_listener_region_add() calls
memory_region_iommu_replay() to notify newly registered IOMMU notifiers
about existing mappings which is totally desirable for case 1.

However for case 2 it is nothing but noop as the window has just been
created and has no valid mappings so replaying those does not do anything.
It is barely noticeable with usual guests but if the window happens to be
really big, such no-op replay might take minutes and trigger RCU stall
warnings in the guest.

For example, a upcoming GPU RAM memory region mapped at 64TiB (right
after SPAPR_PCI_LIMIT) causes a 64bit DMA window to be at least 128TiB
which is (128<<40)/0x10000=2.147.483.648 TCEs to replay.

This mitigates the problem by adding an "skipping_replay" flag to
sPAPRTCETable and defining sPAPR own IOMMU MR replay() hook which does
exactly the same thing as the generic one except it returns early if
@skipping_replay==true.

Another way of fixing this would be delaying replay till the very first
H_PUT_TCE but this does not work if in-kernel H_PUT_TCE handler is
enabled (a likely case).

When "ibm,create-pe-dma-window" is complete, the guest will map only
required regions of the huge DMA window.

Signed-off-by: Alexey Kardashevskiy <address@hidden>
---
Changes:
v4:
* more explaining in the commit log and comments
---
 include/hw/ppc/spapr.h  |  1 +
 hw/ppc/spapr_iommu.c    | 31 +++++++++++++++++++++++++++++++
 hw/ppc/spapr_rtas_ddw.c | 10 ++++++++++
 3 files changed, 42 insertions(+)

diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index ff1bd6061540..2b368e6677c5 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -723,6 +723,7 @@ struct sPAPRTCETable {
     uint64_t *mig_table;
     bool bypass;
     bool need_vfio;
+    bool skipping_replay;
     int fd;
     MemoryRegion root;
     IOMMUMemoryRegion iommu;
diff --git a/hw/ppc/spapr_iommu.c b/hw/ppc/spapr_iommu.c
index 37e98f93214d..8f231799b29b 100644
--- a/hw/ppc/spapr_iommu.c
+++ b/hw/ppc/spapr_iommu.c
@@ -141,6 +141,36 @@ static IOMMUTLBEntry 
spapr_tce_translate_iommu(IOMMUMemoryRegion *iommu,
     return ret;
 }
 
+static void spapr_tce_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n)
+{
+    MemoryRegion *mr = MEMORY_REGION(iommu_mr);
+    IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_GET_CLASS(iommu_mr);
+    hwaddr addr, granularity;
+    IOMMUTLBEntry iotlb;
+    sPAPRTCETable *tcet = container_of(iommu_mr, sPAPRTCETable, iommu);
+
+    if (tcet->skipping_replay) {
+        return;
+    }
+
+    granularity = memory_region_iommu_get_min_page_size(iommu_mr);
+
+    for (addr = 0; addr < memory_region_size(mr); addr += granularity) {
+        iotlb = imrc->translate(iommu_mr, addr, IOMMU_NONE, n->iommu_idx);
+        if (iotlb.perm != IOMMU_NONE) {
+            n->notify(n, &iotlb);
+        }
+
+        /*
+         * if (2^64 - MR size) < granularity, it's possible to get an
+         * infinite loop here.  This should catch such a wraparound.
+         */
+        if ((addr + granularity) < addr) {
+            break;
+        }
+    }
+}
+
 static int spapr_tce_table_pre_save(void *opaque)
 {
     sPAPRTCETable *tcet = SPAPR_TCE_TABLE(opaque);
@@ -659,6 +689,7 @@ static void 
spapr_iommu_memory_region_class_init(ObjectClass *klass, void *data)
     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
 
     imrc->translate = spapr_tce_translate_iommu;
+    imrc->replay = spapr_tce_replay;
     imrc->get_min_page_size = spapr_tce_get_min_page_size;
     imrc->notify_flag_changed = spapr_tce_notify_flag_changed;
     imrc->get_attr = spapr_tce_get_attr;
diff --git a/hw/ppc/spapr_rtas_ddw.c b/hw/ppc/spapr_rtas_ddw.c
index cb8a4103592e..cc9d1f5c1cc8 100644
--- a/hw/ppc/spapr_rtas_ddw.c
+++ b/hw/ppc/spapr_rtas_ddw.c
@@ -171,8 +171,18 @@ static void rtas_ibm_create_pe_dma_window(PowerPCCPU *cpu,
     }
 
     win_addr = (windows == 0) ? sphb->dma_win_addr : sphb->dma64_win_addr;
+    /*
+     * We have just created a window, we know for the fact that it is empty,
+     * use a hack to avoid iterating over the table as it is quite possible
+     * to have billions of TCEs, all empty.
+     * Note that we cannot delay this to the first H_PUT_TCE as this hcall is
+     * mostly likely to be handled in KVM so QEMU just does not know if it
+     * happened.
+     */
+    tcet->skipping_replay = true;
     spapr_tce_table_enable(tcet, page_shift, win_addr,
                            1ULL << (window_shift - page_shift));
+    tcet->skipping_replay = false;
     if (!tcet->nb_table) {
         goto hw_error_exit;
     }
-- 
2.17.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]