Re: [Qemu-ppc] [QEMU-PPC] [PATCH V3 03/10] target/ppc/POWER9: Adapt LPCR handling for POWER9

[David Gibson]

On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh wrote:
> The logical partitioning control register controls a threads operation
> based on the partition it is currently executing. Add new definitions and
> update the mask used when writing to the LPCR based on the POWER9 spec.
> 
> Signed-off-by: Suraj Jitindar Singh <address@hidden>

Reviewed-by: David Gibson <address@hidden>

> ---
>  target/ppc/cpu.h            | 18 ++++++++++++++++++
>  target/ppc/mmu-hash64.c     |  8 ++++++++
>  target/ppc/translate_init.c | 24 ++++++++++++++++++------
>  3 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index bb96dd5..425e79d 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -384,12 +384,19 @@ struct ppc_slb_t {
>  #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
>  #define LPCR_VRMASD_SHIFT (63 - 16)
>  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> +#define LPCR_PECE_U_SHIFT (63 - 19)
> +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt Exit Enable 
> */
>  #define LPCR_RMLS_SHIFT   (63 - 37)
>  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
>  #define LPCR_ILE          (1ull << (63 - 38))
>  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt location */
>  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table */
> +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced Virtualisation */
>  #define LPCR_ONL          (1ull << (63 - 45))
> +#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer */
>  #define LPCR_P7_PECE0     (1ull << (63 - 49))
>  #define LPCR_P7_PECE1     (1ull << (63 - 50))
>  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> @@ -398,11 +405,22 @@ struct ppc_slb_t {
>  #define LPCR_P8_PECE2     (1ull << (63 - 49))
>  #define LPCR_P8_PECE3     (1ull << (63 - 50))
>  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> +#define LPCR_PECE_L_SHIFT (63 - 51)
> +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged Doorbell Exit EN 
> */
> +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell Exit Enable 
> */
> +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit Enable        
> */
> +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit Enable     
> */
> +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit Enable           
> */
>  #define LPCR_MER          (1ull << (63 - 52))
> +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation Shootdown 
> */
>  #define LPCR_TC           (1ull << (63 - 54))
> +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern Interrupt Control 
> */
>  #define LPCR_LPES0        (1ull << (63 - 60))
>  #define LPCR_LPES1        (1ull << (63 - 61))
>  #define LPCR_RMI          (1ull << (63 - 62))
> +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation Int 
> Enable */
>  #define LPCR_HDICE        (1ull << (63 - 63))
>  
>  #define msr_sf   ((env->msr >> MSR_SF)   & 1)
> diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> index bb78fb5..24d9901 100644
> --- a/target/ppc/mmu-hash64.c
> +++ b/target/ppc/mmu-hash64.c
> @@ -1050,6 +1050,14 @@ void helper_store_lpcr(CPUPPCState *env, target_ulong 
> val)
>                        LPCR_P8_PECE2 | LPCR_P8_PECE3 | LPCR_P8_PECE4 |
>                        LPCR_MER | LPCR_TC | LPCR_LPES0 | LPCR_HDICE);
>          break;
> +    case POWERPC_MMU_3_00: /* P9 */
> +        lpcr = val & (LPCR_VPM1 | LPCR_ISL | LPCR_KBV | LPCR_DPFD |
> +                      (LPCR_PECE_U_MASK & LPCR_HVEE) | LPCR_ILE | LPCR_AIL |
> +                      LPCR_UPRT | LPCR_EVIRT | LPCR_ONL |
> +                      (LPCR_PECE_L_MASK & (LPCR_PDEE | LPCR_HDEE | LPCR_EEE |
> +                      LPCR_DEE | LPCR_OEE)) | LPCR_MER | LPCR_GTSE | LPCR_TC 
> |
> +                      LPCR_HEIC | LPCR_LPES0 | LPCR_HVICE | LPCR_HDICE);
> +        break;
>      default:
>          ;
>      }
> diff --git a/target/ppc/translate_init.c b/target/ppc/translate_init.c
> index 84bf125..be35cbd 100644
> --- a/target/ppc/translate_init.c
> +++ b/target/ppc/translate_init.c
> @@ -8870,12 +8870,24 @@ void cpu_ppc_set_papr(PowerPCCPU *cpu)
>      lpcr->default_value &= ~LPCR_RMLS;
>      lpcr->default_value |= 1ull << LPCR_RMLS_SHIFT;
>  
> -    /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
> -     * bit 47 and 48 which are reserved on P7. Here we set them all, which
> -     * will work as expected for both implementations
> -     */
> -    lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 |
> -                           LPCR_P8_PECE3 | LPCR_P8_PECE4;
> +    switch (env->mmu_model) {
> +    case POWERPC_MMU_3_00:
> +        /* By default we choose legacy mode and switch to new hash or radix
> +         * when a register process table hcall is made. So disable process
> +         * tables and guest translation shootdown by default
> +         */
> +        lpcr->default_value &= ~(LPCR_UPRT | LPCR_GTSE);
> +        lpcr->default_value |= LPCR_PDEE | LPCR_HDEE | LPCR_EEE | LPCR_DEE |
> +                               LPCR_OEE;
> +        break;
> +    default:
> +        /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
> +         * bit 47 and 48 which are reserved on P7. Here we set them all, 
> which
> +         * will work as expected for both implementations
> +         */
> +        lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 
> |
> +                               LPCR_P8_PECE3 | LPCR_P8_PECE4;
> +    }
>  
>      /* We should be followed by a CPU reset but update the active value
>       * just in case...

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature