qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-ppc] [PULL 03/40] macio: use the existing IDEDMA aiocb to hold the


From: David Gibson
Subject: [Qemu-ppc] [PULL 03/40] macio: use the existing IDEDMA aiocb to hold the active DMA aiocb
Date: Mon, 1 Feb 2016 13:30:31 +1100

From: Mark Cave-Ayland <address@hidden>

Currently the aiocb is held within MACIOIDEState, however the IDE core code
assumes that the current actvie DMA aiocb is held in aiocb in a few places,
e.g. ide_bus_reset() and ide_reset().

Switch over to using IDEDMA aiocb to store the aiocb for the current active
DMA request so that bus resets and restarts are handled correctly. As a
consequence we can now use ide_set_inactive() rather than handling its
functionality ourselves.

Signed-off-by: Mark Cave-Ayland <address@hidden>
Reviewed-by: John Snow <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
 hw/ide/macio.c | 20 ++++++++++++--------
 hw/ppc/mac.h   |  1 -
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 336784b..bfdc377 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -120,8 +120,8 @@ static void pmac_dma_read(BlockBackend *blk,
     MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 "  "
                   "nsector: %x\n", (offset >> 9), (bytes >> 9));
 
-    m->aiocb = blk_aio_readv(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                             cb, io);
+    s->bus->dma->aiocb = blk_aio_readv(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_dma_write(BlockBackend *blk,
@@ -205,8 +205,8 @@ static void pmac_dma_write(BlockBackend *blk,
     MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 "  "
                   "nsector: %x\n", (offset >> 9), (bytes >> 9));
 
-    m->aiocb = blk_aio_writev(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                              cb, io);
+    s->bus->dma->aiocb = blk_aio_writev(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_dma_trim(BlockBackend *blk,
@@ -232,8 +232,8 @@ static void pmac_dma_trim(BlockBackend *blk,
     s->io_buffer_index += io->len;
     io->len = 0;
 
-    m->aiocb = ide_issue_trim(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                              cb, io);
+    s->bus->dma->aiocb = ide_issue_trim(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
@@ -292,6 +292,8 @@ done:
     } else {
         block_acct_done(blk_get_stats(s->blk), &s->acct);
     }
+
+    ide_set_inactive(s, false);
     io->dma_end(opaque);
 }
 
@@ -306,7 +308,6 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
 
     if (ret < 0) {
         MACIO_DPRINTF("DMA error: %d\n", ret);
-        m->aiocb = NULL;
         ide_dma_error(s);
         goto done;
     }
@@ -357,6 +358,8 @@ done:
             block_acct_done(blk_get_stats(s->blk), &s->acct);
         }
     }
+
+    ide_set_inactive(s, false);
     io->dma_end(opaque);
 }
 
@@ -394,8 +397,9 @@ static void pmac_ide_transfer(DBDMA_io *io)
 static void pmac_ide_flush(DBDMA_io *io)
 {
     MACIOIDEState *m = io->opaque;
+    IDEState *s = idebus_active_if(&m->bus);
 
-    if (m->aiocb) {
+    if (s->bus->dma->aiocb) {
         blk_drain_all();
     }
 }
diff --git a/hw/ppc/mac.h b/hw/ppc/mac.h
index e375ed2..ecf7792 100644
--- a/hw/ppc/mac.h
+++ b/hw/ppc/mac.h
@@ -134,7 +134,6 @@ typedef struct MACIOIDEState {
 
     MemoryRegion mem;
     IDEBus bus;
-    BlockAIOCB *aiocb;
     IDEDMA dma;
     void *dbdma;
     bool dma_active;
-- 
2.5.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]