[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH qemu v10 10/14] spapr_pci: Enable vfio-pci hotplug
From: |
Michael Roth |
Subject: |
Re: [Qemu-ppc] [PATCH qemu v10 10/14] spapr_pci: Enable vfio-pci hotplug |
Date: |
Fri, 10 Jul 2015 16:33:01 -0500 |
User-agent: |
alot/0.3.6 |
Quoting Alexey Kardashevskiy (2015-07-05 21:11:06)
> sPAPR IOMMU is managing two copies of an TCE table:
> 1) a guest view of the table - this is what emulated devices use and
> this is where H_GET_TCE reads from;
> 2) a hardware TCE table - only present if there is at least one vfio-pci
> device on a PHB; it is updated via a memory listener on a PHB address
> space which forwards map/unmap requests to vfio-pci IOMMU host driver.
>
> At the moment presence of vfio-pci devices on a bus affect the way
> the guest view table is allocated. If there is no vfio-pci on a PHB
> and the host kernel supports KVM acceleration of H_PUT_TCE, a table
> is allocated in KVM. However, if there is vfio-pci and we do yet not
> support KVM acceleration for these, the table has to be allocated
> by the userspace.
>
> When vfio-pci device is hotplugged and there were no vfio-pci devices
> already, the guest view table could have been allocated by KVM which
> means that H_PUT_TCE is handled by the host kernel and since we
> do not support vfio-pci in KVM, the hardware table will not be updated.
>
> This reallocates the guest view table in QEMU if the first vfio-pci
> device has just been plugged. spapr_tce_realloc_userspace() handles this.
>
> This replays all the mappings to make sure that the tables are in sync.
> This will not have a visible effect though as for a new device
> the guest kernel will allocate-and-map new addresses and therefore
> existing mappings from emulated devices will not be used by vfio-pci
> devices.
>
> This adds calls to spapr_phb_dma_capabilities_update() in PCI hotplug
> hooks.
>
> Signed-off-by: Alexey Kardashevskiy <address@hidden>
> ---
> Changes:
> v10:
> * removed unnecessary memory_region_del_subregion() and
> memory_region_add_subregion() as
> "vfio: Unregister IOMMU notifiers when container is destroyed" removes
> notifiers in a more correct way
>
> v9:
> * spapr_phb_hotplug_dma_sync() enumerates TCE tables explicitely rather than
> via object_child_foreach()
> * spapr_phb_hotplug_dma_sync() does memory_region_del_subregion() +
> memory_region_add_subregion() as otherwise vfio_listener_region_del() is not
> called and we end up with vfio_iommu_map_notify registered twice (comments
> welcome!)
> if we do hotplug+hotunplug+hotplug of the same device.
> * moved spapr_phb_hotplug_dma_sync() on unplug event to rcu as before calling
> spapr_phb_hotplug_dma_sync(), we need VFIO to release the container, otherwise
> spapr_phb_dma_capabilities_update() will decide that the PHB still has VFIO
> device.
> Actual VFIO PCI device release happens from rcu and since we add ours later,
> it gets executed later and we are good.
> ---
> hw/ppc/spapr_iommu.c | 51
> ++++++++++++++++++++++++++++++++++++++++++---
> hw/ppc/spapr_pci.c | 47 +++++++++++++++++++++++++++++++++++++++++
> include/hw/pci-host/spapr.h | 1 +
> include/hw/ppc/spapr.h | 2 ++
> trace-events | 2 ++
> 5 files changed, 100 insertions(+), 3 deletions(-)
>
> diff --git a/hw/ppc/spapr_iommu.c b/hw/ppc/spapr_iommu.c
> index 45c00d8..2d99c3b 100644
> --- a/hw/ppc/spapr_iommu.c
> +++ b/hw/ppc/spapr_iommu.c
> @@ -78,12 +78,13 @@ static uint64_t *spapr_tce_alloc_table(uint32_t liobn,
> uint32_t nb_table,
> uint32_t page_shift,
> int *fd,
> - bool vfio_accel)
> + bool vfio_accel,
> + bool force_userspace)
> {
> uint64_t *table = NULL;
> uint64_t window_size = (uint64_t)nb_table << page_shift;
>
> - if (kvm_enabled() && !(window_size >> 32)) {
> + if (kvm_enabled() && !force_userspace && !(window_size >> 32)) {
> table = kvmppc_create_spapr_tce(liobn, window_size, fd, vfio_accel);
> }
>
> @@ -222,7 +223,8 @@ static void spapr_tce_table_do_enable(sPAPRTCETable
> *tcet, bool vfio_accel)
> tcet->nb_table,
> tcet->page_shift,
> &tcet->fd,
> - vfio_accel);
> + vfio_accel,
> + false);
>
> memory_region_set_size(&tcet->iommu,
> (uint64_t)tcet->nb_table << tcet->page_shift);
> @@ -495,6 +497,49 @@ int spapr_dma_dt(void *fdt, int node_off, const char
> *propname,
> return 0;
> }
>
> +static int spapr_tce_do_replay(sPAPRTCETable *tcet, uint64_t *table)
> +{
> + target_ulong ioba = tcet->bus_offset, pgsz = (1ULL << tcet->page_shift);
> + long i, ret = 0;
> +
> + for (i = 0; i < tcet->nb_table; ++i, ioba += pgsz) {
> + ret = put_tce_emu(tcet, ioba, table[i]);
> + if (ret) {
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +int spapr_tce_replay(sPAPRTCETable *tcet)
> +{
> + return spapr_tce_do_replay(tcet, tcet->table);
> +}
> +
> +int spapr_tce_realloc_userspace(sPAPRTCETable *tcet, bool replay)
> +{
> + int ret = 0, oldfd;
> + uint64_t *oldtable;
> +
> + oldtable = tcet->table;
> + oldfd = tcet->fd;
> + tcet->table = spapr_tce_alloc_table(tcet->liobn,
> + tcet->nb_table,
> + tcet->page_shift,
> + &tcet->fd,
> + false,
> + true); /* force_userspace */
> +
> + if (replay) {
> + ret = spapr_tce_do_replay(tcet, oldtable);
> + }
> +
> + spapr_tce_free_table(oldtable, oldfd, tcet->nb_table);
> +
> + return ret;
> +}
> +
> int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
> sPAPRTCETable *tcet)
> {
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 76c988f..d1fa157 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -827,6 +827,43 @@ int spapr_phb_dma_reset(sPAPRPHBState *sphb)
> return 0;
> }
>
> +static int spapr_phb_hotplug_dma_sync(sPAPRPHBState *sphb)
> +{
> + int ret = 0, i;
> + bool had_vfio = sphb->has_vfio;
> + sPAPRTCETable *tcet;
> +
> + spapr_phb_dma_capabilities_update(sphb);
So, in the unplug case, we update caps, but has_vfio = false so we don't do
anything else below.
Does that mean our KVM-accelerated TCE table won't get restored until reboot?
Would it make sense to re-enable it here?
> +
> + if (!had_vfio && sphb->has_vfio) {
> + for (i = 0; i < SPAPR_PCI_DMA_MAX_WINDOWS; ++i) {
> + tcet = spapr_tce_find_by_liobn(SPAPR_PCI_LIOBN(sphb->index, i));
> + if (!tcet || !tcet->enabled) {
> + continue;
> + }
> + if (tcet->fd >= 0) {
> + /*
> + * We got first vfio-pci device on accelerated table.
> + * VFIO acceleration is not possible.
> + * Reallocate table in userspace and replay mappings.
> + */
> + ret = spapr_tce_realloc_userspace(tcet, true);
> + trace_spapr_pci_dma_realloc_update(tcet->liobn, ret);
> + } else {
> + /* There was no acceleration, so just replay mappings. */
> + ret = spapr_tce_replay(tcet);
> + trace_spapr_pci_dma_update(tcet->liobn, ret);
> + }
> + if (ret) {
> + break;
> + }
> + }
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /* Macros to operate with address in OF binding to PCI */
> #define b_x(x, p, l) (((x) & ((1<<(l))-1)) << (p))
> #define b_n(x) b_x((x), 31, 1) /* 0 if relocatable */
> @@ -1106,6 +1143,7 @@ static void spapr_phb_add_pci_device(sPAPRDRConnector
> *drc,
> error_setg(errp, "Failed to create pci child device tree node");
> goto out;
> }
> + spapr_phb_hotplug_dma_sync(phb);
> }
>
> drck->attach(drc, DEVICE(pdev),
> @@ -1116,6 +1154,12 @@ out:
> }
> }
>
> +static void spapr_phb_remove_sync_dma(struct rcu_head *head)
> +{
> + sPAPRPHBState *sphb = container_of(head, sPAPRPHBState, rcu);
> + spapr_phb_hotplug_dma_sync(sphb);
> +}
> +
> static void spapr_phb_remove_pci_device_cb(DeviceState *dev, void *opaque)
> {
> /* some version guests do not wait for completion of a device
> @@ -1130,6 +1174,9 @@ static void spapr_phb_remove_pci_device_cb(DeviceState
> *dev, void *opaque)
> */
> pci_device_reset(PCI_DEVICE(dev));
> object_unparent(OBJECT(dev));
> +
> + /* Actual VFIO device release happens from RCU so postpone DMA update */
> + call_rcu1(&((sPAPRPHBState *)opaque)->rcu, spapr_phb_remove_sync_dma);
Hmm... can't think of any reason this wouldn't work, but would be nice
if there was something a bit more straightforward...
When the device is actually finalized, it does:
static void vfio_instance_finalize(Object *obj)
{
PCIDevice *pci_dev = PCI_DEVICE(obj);
VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pci_dev);
VFIOGroup *group = vdev->vbasedev.group;
...
vfio_put_device(vdev);
vfio_put_group(group);
}
When all the groups are removed from a VFIO container, there's a
call to container->iommu_data.release(container). This is the
event we really care about, not so much the fact that a device
got released.
Right now all it does it remove the memory listener, but maybe it
makes sense to allow an additional callback/opaque to register for
the event. Not sure what the best way to do that is though...
And, kind of a separate topic, but if we could do something
similar for the initial group attach, we could drop *all* the
plug/unplug hooks, and the hooks themselves could drop all
the !had_vfio / has_vfio logic/probing, since that would then
be clear from the context.
[Qemu-ppc] [PATCH qemu v10 09/14] spapr_vfio_pci: Remove redundant spapr-pci-vfio-host-bridge, Alexey Kardashevskiy, 2015/07/05
[Qemu-ppc] [PATCH qemu v10 10/14] spapr_pci: Enable vfio-pci hotplug, Alexey Kardashevskiy, 2015/07/05
[Qemu-ppc] [PATCH qemu v10 14/14] spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW), Alexey Kardashevskiy, 2015/07/05