[Qemu-ppc] [PULL 50/52] spapr_pci: map the MSI window in each PHB

[Alexander Graf]

From: Greg Kurz <address@hidden>

On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36faa192cd4b32af8fe5edb31894017d35 has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.

Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(

This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
   - since each PHB instantiates its own IOMMU address space, we
     can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
   - no real need to keep the MSI window setup in a separate function,
     the spapr_pci_msi_init() code moves to spapr_phb_realize().

2) kill the global MSI window as it is not needed in the end

Signed-off-by: Greg Kurz <address@hidden>
Signed-off-by: Alexander Graf <address@hidden>
---
 hw/ppc/spapr.c              |  1 -
 hw/ppc/spapr_pci.c          | 53 ++++++++++++++++++++-------------------------
 include/hw/pci-host/spapr.h |  2 +-
 include/hw/ppc/spapr.h      |  2 --
 4 files changed, 25 insertions(+), 33 deletions(-)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index c619c3b..ee07ece 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1441,7 +1441,6 @@ static void ppc_spapr_init(MachineState *machine)
     spapr_create_nvram(spapr);
 
     /* Set up PCI */
-    spapr_pci_msi_init(spapr, SPAPR_PCI_MSI_WINDOW);
     spapr_pci_rtas_init();
 
     phb = spapr_create_phb(spapr, 0);
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index e894f07..ad0da7f 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -345,7 +345,7 @@ static void rtas_ibm_change_msi(PowerPCCPU *cpu, 
sPAPREnvironment *spapr,
     }
 
     /* Setup MSI/MSIX vectors in the device (via cfgspace or MSIX BAR) */
-    spapr_msi_setmsg(pdev, spapr->msi_win_addr, ret_intr_type == 
RTAS_TYPE_MSIX,
+    spapr_msi_setmsg(pdev, SPAPR_PCI_MSI_WINDOW, ret_intr_type == 
RTAS_TYPE_MSIX,
                      irq, req_num);
 
     /* Add MSI device to cache */
@@ -469,34 +469,6 @@ static const MemoryRegionOps spapr_msi_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN
 };
 
-void spapr_pci_msi_init(sPAPREnvironment *spapr, hwaddr addr)
-{
-    uint64_t window_size = 4096;
-
-    /*
-     * As MSI/MSIX interrupts trigger by writing at MSI/MSIX vectors,
-     * we need to allocate some memory to catch those writes coming
-     * from msi_notify()/msix_notify().
-     * As MSIMessage:addr is going to be the same and MSIMessage:data
-     * is going to be a VIRQ number, 4 bytes of the MSI MR will only
-     * be used.
-     *
-     * For KVM we want to ensure that this memory is a full page so that
-     * our memory slot is of page size granularity.
-     */
-#ifdef CONFIG_KVM
-    if (kvm_enabled()) {
-        window_size = getpagesize();
-    }
-#endif
-
-    spapr->msi_win_addr = addr;
-    memory_region_init_io(&spapr->msiwindow, NULL, &spapr_msi_ops, spapr,
-                          "msi", window_size);
-    memory_region_add_subregion(get_system_memory(), spapr->msi_win_addr,
-                                &spapr->msiwindow);
-}
-
 /*
  * PHB PCI device
  */
@@ -516,6 +488,7 @@ static void spapr_phb_realize(DeviceState *dev, Error 
**errp)
     char *namebuf;
     int i;
     PCIBus *bus;
+    uint64_t msi_window_size = 4096;
 
     if (sphb->index != -1) {
         hwaddr windows_base;
@@ -608,6 +581,28 @@ static void spapr_phb_realize(DeviceState *dev, Error 
**errp)
     address_space_init(&sphb->iommu_as, &sphb->iommu_root,
                        sphb->dtbusname);
 
+    /*
+     * As MSI/MSIX interrupts trigger by writing at MSI/MSIX vectors,
+     * we need to allocate some memory to catch those writes coming
+     * from msi_notify()/msix_notify().
+     * As MSIMessage:addr is going to be the same and MSIMessage:data
+     * is going to be a VIRQ number, 4 bytes of the MSI MR will only
+     * be used.
+     *
+     * For KVM we want to ensure that this memory is a full page so that
+     * our memory slot is of page size granularity.
+     */
+#ifdef CONFIG_KVM
+    if (kvm_enabled()) {
+        msi_window_size = getpagesize();
+    }
+#endif
+
+    memory_region_init_io(&sphb->msiwindow, NULL, &spapr_msi_ops, spapr,
+                          "msi", msi_window_size);
+    memory_region_add_subregion(&sphb->iommu_root, SPAPR_PCI_MSI_WINDOW,
+                                &sphb->msiwindow);
+
     pci_setup_iommu(bus, spapr_pci_dma_iommu, sphb);
 
     pci_bus_set_route_irq_fn(bus, spapr_route_intx_pin_to_irq);
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 32f0aa7..4ea2a0d 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -70,7 +70,7 @@ struct sPAPRPHBState {
 
     MemoryRegion memspace, iospace;
     hwaddr mem_win_addr, mem_win_size, io_win_addr, io_win_size;
-    MemoryRegion memwindow, iowindow;
+    MemoryRegion memwindow, iowindow, msiwindow;
 
     uint32_t dma_liobn;
     AddressSpace iommu_as;
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index 36e8e51..749daf4 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -13,8 +13,6 @@ struct sPAPRNVRAM;
 typedef struct sPAPREnvironment {
     struct VIOsPAPRBus *vio_bus;
     QLIST_HEAD(, sPAPRPHBState) phbs;
-    hwaddr msi_win_addr;
-    MemoryRegion msiwindow;
     struct sPAPRNVRAM *nvram;
     XICSState *icp;
 
-- 
1.8.1.4