Re: [Qemu-ppc] [Qemu-devel] [PATCH 2/2] tests-ppc64: test for -device spapr-pci-host-bridge

[Alexey Kardashevskiy]

On 03/06/2014 12:59 PM, Alexey Kardashevskiy wrote:
> On 03/06/2014 07:42 AM, Andreas Färber wrote:
>> Am 14.02.2014 05:05, schrieb Alexey Kardashevskiy:
>>> On 02/11/2014 02:48 AM, Andreas Färber wrote:
>>>> Am 10.02.2014 04:52, schrieb Alexey Kardashevskiy:
>>>>> This adds a test if SPAPR PHB can be added via the command line.
>>>>>
>>>>> Signed-off-by: Alexey Kardashevskiy <address@hidden>
>>>>> ---
>>>>>  tests/Makefile         |  2 ++
>>>>>  tests/spapr-phb-test.c | 28 ++++++++++++++++++++++++++++
>>>>>  2 files changed, 30 insertions(+)
>>>>>  create mode 100644 tests/spapr-phb-test.c
>>>>>
>>>>> diff --git a/tests/Makefile b/tests/Makefile
>>>>> index 3a00ea7..303225e 100644
>>>>> --- a/tests/Makefile
>>>>> +++ b/tests/Makefile
>>>>> @@ -117,6 +117,7 @@ check-qtest-s390x-y += tests/qom-test$(EXESUF)
>>>>>  check-qtest-unicore32-y += tests/qom-test$(EXESUF)
>>>>>  check-qtest-xtensa-y += tests/qom-test$(EXESUF)
>>>>>  check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)
>>>>> +check-qtest-ppc64-y += tests/spapr-phb-test$(EXESUF)
>>>>>  
>>>>>  check-qapi-schema-y := $(addprefix tests/qapi-schema/, \
>>>>>          comments.json empty.json funny-char.json indented-expr.json \
>>>>> @@ -203,6 +204,7 @@ libqos-omap-obj-y = $(libqos-obj-y) 
>>>>> tests/libqos/i2c-omap.o
>>>>>  tests/rtc-test$(EXESUF): tests/rtc-test.o
>>>>>  tests/m48t59-test$(EXESUF): tests/m48t59-test.o
>>>>>  tests/endianness-test$(EXESUF): tests/endianness-test.o
>>>>> +tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y)
>>>>>  tests/fdc-test$(EXESUF): tests/fdc-test.o
>>>>>  tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
>>>>>  tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
>>>>> diff --git a/tests/spapr-phb-test.c b/tests/spapr-phb-test.c
>>>>> new file mode 100644
>>>>> index 0000000..8cad354
>>>>> --- /dev/null
>>>>> +++ b/tests/spapr-phb-test.c
>>>>> @@ -0,0 +1,28 @@
>>>>> +/*
>>>>> + * QTest testcase for SPAPR PHB
>>>>> + *
>>>>
>>>> Missing some IBM or aik copyright?
>>>>
>>>>> + * This work is licensed under the terms of the GNU GPL, version 2 or 
>>>>> later.
>>>>> + * See the COPYING file in the top-level directory.
>>>>> + */
>>>>> +#include <glib.h>
>>>>> +
>>>>> +#include "libqtest.h"
>>>>> +
>>>>> +#define TYPE_SPAPR_PCI_HOST_BRIDGE "spapr-pci-host-bridge"
>>>>> +
>>>>> +static void test_phb_device(void)
>>>>> +{
>>>>> +    qtest_start("-device " TYPE_SPAPR_PCI_HOST_BRIDGE ",index=100");
>>>>> +
>>>>> +    qtest_end();
>>>>> +}
>>>>> +
>>>>> +int main(int argc, char **argv)
>>>>> +{
>>>>> +    g_test_init(&argc, &argv, NULL);
>>>>> +
>>>>> +    qtest_add_func("/qmp/phb_device", test_phb_device);
>>>>> +
>>>>> +    return g_test_run();
>>>>> +}
>>>>> +
>>>>
>>>> Trailing white line FWIW.
>>>>
>>>> This is looking good, thanks for your work. Apart from the device
>>>> there's nothing ppc-specific in here, so I might take it through
>>>> qom-next. One nit here is the test name, which I think should rather be
>>>> /spapr-phb/device (nothing QMP-specific in there) - I could tweak that
>>>> for you.
>>>>
>>>> Another question is, do you plan to test variations of the device?
>>>> Otherwise I would suggest to place the qtest_start() and qtest_end()
>>>> into main(), so that individual future tests can test certain
>>>> functionalities on the instantiated device rather than repeatedly
>>>> launching QEMU processes.
>>>
>>> Is this better? It does the job.
>>
>> Hmm... ;)
>>
>>> I am not quite sure what qtest_add_func() is for. Is there any good example
>>> of calling such a function via json or whatever it is? Thanks.
>>
>> There are lots of other tests/*-test.c files, including the series you
>> replied to. I've tweaked your original patch so that it outputs:
>>
>> $ make check-qtest-ppc64 V=1
>> [...]
>> TEST: tests/spapr-phb-test... (pid=3080)
>>   /ppc64/spapr-phb/device:                                            OK
>> PASS: tests/spapr-phb-test
>>
>> "/spapr-phb/device" is the name of the unit test supplied to
>> qtest_add_func(), which then prepends the architecture for uniqueness.
>> Without calling it, there is no indication that the test was successful.
>>
>> Individual tests reading/writing registers etc. will need the
>> qemu-system-ppc64 process running, so g_test_run() needs to go before
>> qtest_end(). Or if you want to launch it multiple times (e.g. with
>> different parameters) place it into the test function like originally.
>>
>> Your test did not pass on qemu.git or qom-next - I picked up the
>> corresponding fix from ppc-next to reallow -device spapr-pci-host-bridge.
> 
> Sure it did not pass, this is why I made the test ;)
> 
> But I wonder why this fix not gone to upstream immediately - it was breakage.
> 
> 
>> Further the patch was missing a line for gcov to pick up the .o file:
> 
> 
> 
>> Gcov report for ppc64-softmmu/hw/ppc/spapr_pci.c:
>> File '/home/andreas/QEMU/qemu/hw/ppc/spapr_pci.c'
>> Lines executed:42.98% of 342
> 
> 
> 
> What did you do to get this output? None from "make check-help" seems to do
> this.
> 
> btw it would nice if people updated "make check-help" when they add new
> tests as without documentation this is all we have to know what tests are
> there. For example, it was not very obvious how
> check-tests/qemu-iotests-quick.sh is called and how it works.
> 
> Or there is some howto and I am just disturbingly blind? Thanks.
> 
> 
> Also thanks for comments and tweaks but I still do not understand if I
> still have to do anything regarding these 2 patches.


Andreas?


>> File '../trace/generated-tracers.h'
>> Lines executed:0.00% of 12
>>
>> File '/usr/include/libfdt.h'
>> Lines executed:100.00% of 5
>>
>> File '/usr/include/libfdt_env.h'
>> Lines executed:100.00% of 2
>>
>> File '/home/andreas/QEMU/qemu/include/hw/pci-host/spapr.h'
>> Lines executed:0.00% of 2
>>
>> File '/home/andreas/QEMU/qemu/include/hw/ppc/spapr.h'
>> Lines executed:22.22% of 9
>>
>> File '/home/andreas/QEMU/qemu/include/hw/pci/pci.h'
>> Lines executed:0.00% of 4
>>
>> File '/home/andreas/QEMU/qemu/include/hw/irq.h'
>> Lines executed:0.00% of 4
>>
>> File '/home/andreas/QEMU/qemu/include/qemu/bitops.h'
>> Lines executed:100.00% of 5
>>
>> File '/home/andreas/QEMU/qemu/include/qemu/bswap.h'
>> Lines executed:100.00% of 6
>>
>> File '/usr/include/bits/byteswap.h'
>> Lines executed:100.00% of 4
>>
>>
>> Regards,
>> Andreas
>>
>>> diff --git a/tests/spapr-phb-test.c b/tests/spapr-phb-test.c
>>> new file mode 100644
>>> index 0000000..11f186c
>>> --- /dev/null
>>> +++ b/tests/spapr-phb-test.c
>>> @@ -0,0 +1,24 @@
>>> +/*
>>> + * QTest testcase for SPAPR PHB
>>> + *
>>> + * Authors:
>>> + *  Alexey Kardashevskiy <address@hidden>
>>> + *
>>> + * This work is licensed under the terms of the GNU GPL, version 2 or 
>>> later.
>>> + * See the COPYING file in the top-level directory.
>>> + */
>>> +#include <glib.h>
>>> +
>>> +#include "libqtest.h"
>>> +
>>> +#define TYPE_SPAPR_PCI_HOST_BRIDGE "spapr-pci-host-bridge"
>>> +
>>> +int main(int argc, char **argv)
>>> +{
>>> +    g_test_init(&argc, &argv, NULL);
>>> +
>>> +    qtest_start("-device " TYPE_SPAPR_PCI_HOST_BRIDGE ",index=100");
>>> +    qtest_end();
>>> +
>>> +    return g_test_run();
>>> +}
>>
> 
> 


-- 
Alexey