[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] pSeries target
From: |
folkert |
Subject: |
Re: [Qemu-ppc] pSeries target |
Date: |
Thu, 27 Sep 2012 15:30:48 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
> I think you need at least to adjust the load-base like it has been
> described here:
>
> http://lists.gnu.org/archive/html/qemu-ppc/2012-02/msg00048.html
>
> That might help a little bit with the bootloader, but the kernel most
> likely still will not work yet, I guess.
That indeed gives better results: the listed kernel size seems sensible
as well as the boot image timestamp.
Never booted an aix kernel in verbose mode so I can't tell if this
output makes any sense or not. At the bottom there are three messages
that might indicate a problem:
-------------------------------------------------------------------------------
Welcome to AIX.
boot image timestamp: 21:23 09/01
processor count: 2; memory size: 4096MB; kernel size: 35064581
boot device:
/vdevice/address@hidden/address@hidden,0:\ppc\chrp\bootfile.exe
8000FFEC bytes of free memory remain at address 7FFF0014
load address: 0x00004000 aixmon size: 0x000CAC00 boot image size: 0x00F533A0
AIX is starting.
get-property for #bytes on zero phandle
The temporary memory region list is at 1 percent capacity.
The temporary IPLCB is at 1 percent capacity.
Activating physical CPU#001... done.
The IPLCB address is 0x0FFFC000
name offset size
ipl_cb_and_bit_map 00000000 ......00002B3C
bit_map........... 000006E0 ......00000006
ipl_info.......... 00000178 ......00000024
system_info....... 0000019C ......000000BC
processor_info.... 00000258 ......00000390
lpar_id_info...... 000005E8 ......00000088
lpar_info......... 00000670 ......00000014
processor page.... 00000690 ......00000010
residual.......... 00000770 ......000023CC
fwad_info......... 000006A0 ......00000040
region address region length attr label
0 0x0000000000000000 0x000000000FFFA000 0x01 0x01
1 0x000000000FFFA000 0x0000000000002000 0x01 0x03
2 0x000000000FFFC000 0x0000000000003000 0x01 0x02
3 0x000000000FFFF000 0x0000000000000014 0x00 0x05
4 0x000000000FFFF014 0x00000000F0000FEC 0x01 0x01
5 0x0000000100000000 0xFFFFFFFF00000000 0x00 0x07
----------------------------
0000012C bytes of free memory remain at address 00004000
compressed kernel addr: CEC00; sz: 7F9391; uncompressed kernel addr: DE88400
name source dest size flags
.data E868640 2000000 124BF48 1
basecfg 0 0 0 0
ramfs 8C7FA0 E869000 68F220 1
.text DE88640 CEC00 9E0000 1
.ldr FAB4588 AAF000 8A95B 1
symtab FE47AE0 B3A000 1B1425 1
kern. hdr DE88400 0 240 1
.bss 0 324BF48 25540B8 2
end of BSS: 057A0000; RAM filesystem: 0F968000
entry_point: 0x000CEC28
kernel debugger setting: enabled
-------------------------------------------------------------------------------
Starting kernel
h_get_ppp might not be right yet
Trying to write invalid spr 157 09d at 000000000036dc3c
Trying to read invalid spr 280 118 at 0000000000557bc0
Folkert van Heusden
--
Looking for a cheap but fast webhoster with an excellent helpdesk?
http://keetweej.vanheusden.com/redir.php?id=1001
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
- [Qemu-ppc] pSeries target, folkert, 2012/09/07
- Re: [Qemu-ppc] pSeries target, Alexander Graf, 2012/09/08
- Re: [Qemu-ppc] pSeries target, folkert, 2012/09/08
- Re: [Qemu-ppc] pSeries target, folkert, 2012/09/08
- Re: [Qemu-ppc] pSeries target, folkert, 2012/09/08
- Re: [Qemu-ppc] pSeries target, Benjamin Herrenschmidt, 2012/09/12
- Re: [Qemu-ppc] pSeries target, Benjamin Herrenschmidt, 2012/09/12
- Re: [Qemu-ppc] pSeries target, folkert, 2012/09/27
- Re: [Qemu-ppc] pSeries target, Benjamin Herrenschmidt, 2012/09/27
- Re: [Qemu-ppc] pSeries target, Thomas Huth, 2012/09/27
- Re: [Qemu-ppc] pSeries target,
folkert <=
- Re: [Qemu-ppc] pSeries target, Benjamin Herrenschmidt, 2012/09/27