qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1828507] [NEW] qemu-system-ppc64 smp crash on manual r


From: Amol Surati
Subject: [Qemu-devel] [Bug 1828507] [NEW] qemu-system-ppc64 smp crash on manual reset
Date: Fri, 10 May 2019 06:02:46 -0000

Public bug reported:

Host Environment:
   x86_64 Linux v5.0.2
   QEMU emulator version 4.0.50 (v4.0.0-354-g812b835fb4)
   SLOF:
       Build Date = Jan 14 2019 18:00:39
       FW Version = git-a5b428e1c1eae703

Problem: Qemu crash immediately after a manual reset
         (this is not the initial reset which launches the guest).

Steps:

1. Download Debian ppc64el mini.iso:
   
http://ftp.debian.org/debian/dists/sid/main/installer-ppc64el/current/images/netboot/mini.iso
2. Run qemu on the host. Ensure that it runs with more than one CPUs. With a 
single CPU, I was unable
   to reproduce the crash.
   qemu-system-ppc64 -M pseries -cpu power9 -smp 2 -m 512 -cdrom mini.iso
3. SLOF prints the version info on the serial device, and proceeds to boot.
4. After a few seconds, the GRUB menu appears on the VGA screen.
5. Select one of the install options (I have tested with Default and Expert), 
and wait
   for the Debian's text-mode installer (blue-gray-red) screen to appear.
6. Click Machine->Reset (or enter system_reset on the qemu monitor).
7. Notice that, on the serial device, SLOF has printed the version info. That 
is, the system
   has reset and is attempting to boot again.
8. On the host cmd prompt, qemu dies after printing this fatal error and 
spewing the
   contents of the CPU registers:

   qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support
   <CPU contents> (See attached out.txt for details)
   Aborted (core dumped)


The HV exception is either
   (a) 70 = HISI, which occurs when NIP contains an outright bogus or 
inaccessible value, or
   (b) 69 = HDSI, which occurs when NIP happens to contain a somewhat saner 
value, and
       the cpu attempts to run the instruction at that address.

The exception can occur on either of the CPUs. It occurs when qemu is running 
the SLOF
code.

** Affects: qemu
     Importance: Undecided
         Status: New

** Attachment added: "a few instances of the crash"
   https://bugs.launchpad.net/bugs/1828507/+attachment/5262806/+files/out.txt

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1828507

Title:
  qemu-system-ppc64 smp crash on manual reset

Status in QEMU:
  New

Bug description:
  Host Environment:
     x86_64 Linux v5.0.2
     QEMU emulator version 4.0.50 (v4.0.0-354-g812b835fb4)
     SLOF:
         Build Date = Jan 14 2019 18:00:39
         FW Version = git-a5b428e1c1eae703

  Problem: Qemu crash immediately after a manual reset
           (this is not the initial reset which launches the guest).

  Steps:

  1. Download Debian ppc64el mini.iso:
     
http://ftp.debian.org/debian/dists/sid/main/installer-ppc64el/current/images/netboot/mini.iso
  2. Run qemu on the host. Ensure that it runs with more than one CPUs. With a 
single CPU, I was unable
     to reproduce the crash.
     qemu-system-ppc64 -M pseries -cpu power9 -smp 2 -m 512 -cdrom mini.iso
  3. SLOF prints the version info on the serial device, and proceeds to boot.
  4. After a few seconds, the GRUB menu appears on the VGA screen.
  5. Select one of the install options (I have tested with Default and Expert), 
and wait
     for the Debian's text-mode installer (blue-gray-red) screen to appear.
  6. Click Machine->Reset (or enter system_reset on the qemu monitor).
  7. Notice that, on the serial device, SLOF has printed the version info. That 
is, the system
     has reset and is attempting to boot again.
  8. On the host cmd prompt, qemu dies after printing this fatal error and 
spewing the
     contents of the CPU registers:

     qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support
     <CPU contents> (See attached out.txt for details)
     Aborted (core dumped)

  
  The HV exception is either
     (a) 70 = HISI, which occurs when NIP contains an outright bogus or 
inaccessible value, or
     (b) 69 = HDSI, which occurs when NIP happens to contain a somewhat saner 
value, and
         the cpu attempts to run the instruction at that address.

  The exception can occur on either of the CPUs. It occurs when qemu is running 
the SLOF
  code.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1828507/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]