[Qemu-devel] [PATCH 4/5] tests/uefi-test-tools: add build scripts

[Laszlo Ersek]

Introduce the following build scripts under "tests/uefi-test-tools":

* "build.sh" builds a single module (a UEFI application) from
  UefiTestToolsPkg, for a single QEMU emulation target.

  "build.sh" relies on cross-compilers when the emulation target and the
  build host architecture don't match. The cross-compiler prefix is
  computed according to a fixed, Linux-specific pattern. No attempt is
  made to copy or reimplement the GNU Make magic from "qemu/roms/Makefile"
  for cross-compiler prefix determination. The reason is that the build
  host OSes that are officially supported by edk2, and those that are
  supported by QEMU, intersect only in Linux. (Note that the UNIXGCC
  toolchain is being removed from edk2,
  <https://bugzilla.tianocore.org/show_bug.cgi?id=1377>.)

* "Makefile" currently builds the "UefiTestToolsPkg/BiosTablesTest"
  application, for arm, aarch64, i386, and x86_64, with the help of
  "build.sh".

  "Makefile" turns each resultant UEFI executable into a UEFI-bootable,
  qcow2-compressed ISO image. The ISO images are output as
  "tests/data/uefi-boot-images/bios-tables-test.<TARGET>.iso.qcow2".

  Each ISO image should be passed to QEMU as follows:

    -drive id=boot-cd,if=none,readonly,format=qcow2,file=$ISO \
    -device virtio-scsi-pci,id=scsi0 \
    -device scsi-cd,drive=boot-cd,bus=scsi0.0,bootindex=0 \

  "Makefile" assumes that "mkdosfs", "mtools", and "genisoimage" are
  present.

Cc: "Michael S. Tsirkin" <address@hidden>
Cc: Ard Biesheuvel <address@hidden>
Cc: Gerd Hoffmann <address@hidden>
Cc: Igor Mammedov <address@hidden>
Cc: Philippe Mathieu-Daudé <address@hidden>
Cc: Shannon Zhao <address@hidden>
Signed-off-by: Laszlo Ersek <address@hidden>
---
 tests/uefi-test-tools/Makefile   |  92 +++++++++++++
 tests/uefi-test-tools/.gitignore |   3 +
 tests/uefi-test-tools/build.sh   | 145 ++++++++++++++++++++
 3 files changed, 240 insertions(+)

diff --git a/tests/uefi-test-tools/Makefile b/tests/uefi-test-tools/Makefile
new file mode 100644
index 000000000000..7b6dd227e433
--- /dev/null
+++ b/tests/uefi-test-tools/Makefile
@@ -0,0 +1,92 @@
+# Makefile for the test helper UEFI applications that run in guests.
+#
+# Copyright (C) 2019, Red Hat, Inc.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License that accompanies this
+# distribution. The full text of the license may be found at
+# <http://opensource.org/licenses/bsd-license.php>.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+edk2_dir              := ../../roms/edk2
+images_dir            := ../data/uefi-boot-images
+emulation_targets     := arm aarch64 i386 x86_64
+uefi_binaries         := bios-tables-test
+intermediate_suffixes := .efi .fat .iso.raw
+
+images: $(foreach binary,$(uefi_binaries), \
+               $(foreach target,$(emulation_targets), \
+                       $(images_dir)/$(binary).$(target).iso.qcow2))
+
+# Preserve all intermediate targets if the build succeeds.
+# - Intermediate targets help with development & debugging.
+# - Preserving intermediate targets also keeps spurious changes out of the
+#   final build products, in case the user re-runs "make" without any changes
+#   to the UEFI source code. Normally, the intermediate files would have been
+#   removed by the last "make" invocation, hence the re-run would rebuild them
+#   from the unchanged UEFI sources. Unfortunately, the "mkdosfs" and
+#   "genisoimage" utilities embed timestamp-based information in their outputs,
+#   which causes git to report differences for the tracked qcow2 ISO images.
+.SECONDARY: $(foreach binary,$(uefi_binaries), \
+               $(foreach target,$(emulation_targets), \
+                       $(foreach suffix,$(intermediate_suffixes), \
+                               Build/$(binary).$(target)$(suffix))))
+
+# In the pattern rules below, the stem (%, $*) stands for
+# "$(binary).$(target)".
+
+# Convert the raw ISO image to a qcow2 one, enabling compression, and using a
+# small cluster size. This allows for small binary files under git control,
+# hence for small binary patches.
+$(images_dir)/%.iso.qcow2: Build/%.iso.raw
+       mkdir -p -- $(images_dir)
+       $${QTEST_QEMU_IMG:-qemu-img} convert -f raw -O qcow2 -c \
+               -o cluster_size=512 -- $< $@
+
+# Embed the "UEFI system partition" into an ISO9660 file system as an ElTorito
+# boot image.
+Build/%.iso.raw: Build/%.fat
+       genisoimage -input-charset ASCII -efi-boot $(notdir $<) -no-emul-boot \
+               -quiet -o $@ -- $<
+
+# Define chained macros in order to map QEMU system emulation targets to
+# *short* UEFI architecture identifiers. Periods are allowed in, and ultimately
+# stripped from, the argument.
+map_arm_to_uefi     = $(subst arm,ARM,$(1))
+map_aarch64_to_uefi = $(subst aarch64,AA64,$(call map_arm_to_uefi,$(1)))
+map_i386_to_uefi    = $(subst i386,IA32,$(call map_aarch64_to_uefi,$(1)))
+map_x86_64_to_uefi  = $(subst x86_64,X64,$(call map_i386_to_uefi,$(1)))
+map_to_uefi         = $(subst .,,$(call map_x86_64_to_uefi,$(1)))
+
+# Format a "UEFI system partition", using the UEFI binary as the default boot
+# loader. Add 10% size for filesystem metadata, round up to the next KB, and
+# make sure the size is large enough for a FAT filesystem. Name the filesystem
+# after the UEFI binary. (Excess characters are automatically dropped from the
+# filesystem label.)
+Build/%.fat: Build/%.efi
+       rm -f -- $@
+       uefi_bin_b=$$(stat --format=%s -- $<) && \
+               uefi_fat_kb=$$(( (uefi_bin_b * 11 / 10 + 1023) / 1024 )) && \
+               uefi_fat_kb=$$(( uefi_fat_kb >= 64 ? uefi_fat_kb : 64 )) && \
+               mkdosfs -C $@ -n $(basename $(@F)) -- $$uefi_fat_kb
+       MTOOLS_SKIP_CHECK=1 mmd -i $@ ::EFI
+       MTOOLS_SKIP_CHECK=1 mmd -i $@ ::EFI/BOOT
+       MTOOLS_SKIP_CHECK=1 mcopy -i $@ -- $< \
+               ::EFI/BOOT/BOOT$(call map_to_uefi,$(suffix $*)).EFI
+
+# In the pattern rules below, the stem (%, $*) stands for "$(target)" only. The
+# association between the UEFI binary (such as "bios-tables-test") and the
+# component name from the edk2 platform DSC file (such as "BiosTablesTest") is
+# explicit in each rule.
+
+Build/bios-tables-test.%.efi: build-edk2-tools
+       ./build.sh $(edk2_dir) BiosTablesTest $* $@
+
+build-edk2-tools:
+       $(MAKE) -C $(edk2_dir)/BaseTools
+
+clean:
+       rm -rf Build Conf log
+       $(MAKE) -C $(edk2_dir)/BaseTools clean
diff --git a/tests/uefi-test-tools/.gitignore b/tests/uefi-test-tools/.gitignore
new file mode 100644
index 000000000000..9f246701dea1
--- /dev/null
+++ b/tests/uefi-test-tools/.gitignore
@@ -0,0 +1,3 @@
+Build
+Conf
+log
diff --git a/tests/uefi-test-tools/build.sh b/tests/uefi-test-tools/build.sh
new file mode 100755
index 000000000000..155cb75c4ddb
--- /dev/null
+++ b/tests/uefi-test-tools/build.sh
@@ -0,0 +1,145 @@
+#!/bin/bash
+
+# Build script that determines the edk2 toolchain to use, invokes the edk2
+# "build" utility, and copies the built UEFI binary to the requested location.
+#
+# Copyright (C) 2019, Red Hat, Inc.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License that accompanies this
+# distribution. The full text of the license may be found at
+# <http://opensource.org/licenses/bsd-license.php>.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+set -e -u -C
+
+# Save the command line arguments. We need to reset $# to 0 before sourcing
+# "edksetup.sh", as it will inherit address@hidden
+program_name=$(basename -- "$0")
+edk2_dir=$1
+dsc_component=$2
+emulation_target=$3
+uefi_binary=$4
+shift 4
+
+# Set up the environment for edk2 building.
+export PACKAGES_PATH=$(realpath -- "$edk2_dir")
+export WORKSPACE=$PWD
+mkdir -p Conf
+
+# Source "edksetup.sh" carefully.
+set +e +u +C
+source "$PACKAGES_PATH/edksetup.sh"
+ret=$?
+set -e -u -C
+if [ $ret -ne 0 ]; then
+  exit $ret
+fi
+
+# Map the QEMU system emulation target to the following types of architecture
+# identifiers:
+# - edk2,
+# - gcc cross-compilation.
+# Cover only those targets that are supported by the UEFI spec and edk2.
+case "$emulation_target" in
+  (arm)
+    edk2_arch=ARM
+    gcc_arch=arm
+    ;;
+  (aarch64)
+    edk2_arch=AARCH64
+    gcc_arch=aarch64
+    ;;
+  (i386)
+    edk2_arch=IA32
+    gcc_arch=i686
+    ;;
+  (x86_64)
+    edk2_arch=X64
+    gcc_arch=x86_64
+    ;;
+  (*)
+    printf '%s: unknown/unsupported QEMU system emulation target "%s"\n' \
+      "$program_name" "$emulation_target" >&2
+    exit 1
+    ;;
+esac
+
+# Check if cross-compilation is needed.
+host_arch=$(uname -m)
+if [ "$gcc_arch" == "$host_arch" ] ||
+   ( [ "$gcc_arch" == i686 ] && [ "$host_arch" == x86_64 ] ); then
+  cross_prefix=
+else
+  cross_prefix=${gcc_arch}-linux-gnu-
+fi
+
+# Expose cross_prefix (which is possibly empty) to the edk2 tools. While at it,
+# determine the suitable edk2 toolchain as well.
+# - For ARM and AARCH64, edk2 only offers the GCC5 toolchain tag, which covers
+#   the gcc-5+ releases.
+# - For IA32 and X64, edk2 offers the GCC44 through GCC49 toolchain tags, in
+#   addition to GCC5. Unfortunately, the mapping between the toolchain tags and
+#   the actual gcc releases isn't entirely trivial. Run "git-blame" on
+#   "OvmfPkg/build.sh" in edk2 for more information.
+# And, because the above is too simple, we have to assign cross_prefix to an
+# edk2 build variable that is specific to both the toolchain tag and the target
+# architecture.
+case "$edk2_arch" in
+  (ARM)
+    edk2_toolchain=GCC5
+    export GCC5_ARM_PREFIX=$cross_prefix
+    ;;
+  (AARCH64)
+    edk2_toolchain=GCC5
+    export GCC5_AARCH64_PREFIX=$cross_prefix
+    ;;
+  (IA32|X64)
+    gcc_version=$("${cross_prefix}gcc" -v 2>&1 | tail -1 | awk '{print $3}')
+    case "$gcc_version" in
+      ([1-3].*|4.[0-3].*)
+        printf '%s: unsupported gcc version "%s"\n' \
+          "$program_name" "$gcc_version" >&2
+        exit 1
+        ;;
+      (4.4.*)
+        edk2_toolchain=GCC44
+        ;;
+      (4.5.*)
+        edk2_toolchain=GCC45
+        ;;
+      (4.6.*)
+        edk2_toolchain=GCC46
+        ;;
+      (4.7.*)
+        edk2_toolchain=GCC47
+        ;;
+      (4.8.*)
+        edk2_toolchain=GCC48
+        ;;
+      (4.9.*|6.[0-2].*)
+        edk2_toolchain=GCC49
+        ;;
+      (*)
+        edk2_toolchain=GCC5
+        ;;
+    esac
+    eval "export ${edk2_toolchain}_BIN=\$cross_prefix"
+    ;;
+esac
+
+# Build the UEFI binary
+mkdir -p log
+build \
+  --arch="$edk2_arch" \
+  --buildtarget=DEBUG \
+  --platform=UefiTestToolsPkg/UefiTestToolsPkg.dsc \
+  --tagname="$edk2_toolchain" \
+  --module="UefiTestToolsPkg/$dsc_component/$dsc_component.inf" \
+  --log="log/$dsc_component.$edk2_arch.log" \
+  --report-file="log/$dsc_component.$edk2_arch.report"
+cp -a -- \
+  "Build/UefiTestTools/DEBUG_${edk2_toolchain}/$edk2_arch/$dsc_component.efi" \
+  "$uefi_binary"
-- 
2.19.1.3.g30247aa5d201