[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v13 0/6] Add support for TPM Physical Presence i
From: |
Marc-André Lureau |
Subject: |
Re: [Qemu-devel] [PATCH v13 0/6] Add support for TPM Physical Presence interface |
Date: |
Tue, 18 Dec 2018 13:28:53 +0400 |
Hi Michael,
On Tue, Dec 18, 2018 at 5:42 AM Michael S. Tsirkin <address@hidden> wrote:
>
> On Thu, Dec 13, 2018 at 02:26:42AM +0400, Marc-André Lureau wrote:
> > Hi,
> >
> > The following patches implement the TPM Physical Presence Interface
> > that allows a user to set a command via ACPI (sysfs entry in Linux)
> > that, upon the next reboot, the firmware looks for and acts upon by
> > sending sequences of commands to the TPM.
> >
> > A dedicated memory region is added to the TPM CRB & TIS devices, at
> > address/size 0xFED45000/0x400. A new "etc/tpm/config" fw_cfg entry
> > holds the location for that PPI region and some version details, to
> > allow for future flexibility.
> >
> > With the associated edk2/ovmf firmware, the Windows HLK "PPI 1.3" test
> > now runs successfully.
> >
> > It is based on previous work from Stefan Berger ("[PATCH v2 0/4]
> > Implement Physical Presence interface for TPM 1.2 and 2")
> >
> > The edk2 support is merged upstream.
>
>
> Breaks build with tpm disabled:
>
> /usr/bin/ld: hw/i386/acpi-build.o: in function `build_dsdt':
> /scm/qemu/hw/i386/acpi-build.c:2158: undefined reference to
> `tpm_build_ppi_acpi'
> /usr/bin/ld: /scm/qemu/hw/i386/acpi-build.c:2179: undefined reference to
> `tpm_build_ppi_acpi'
> collect2: error: ld returned 1 exit status
Thanks for noticing, this is probably a regression from v13, since the
tpm_build_ppi_acpi was moved to a separate unit that is not always
built.
There is a lot of TPM code that we always build in acpi-build. Either
the code should have #ifdef TPM, or we use stubs.
Fwiw, the preliminary #ifdef patch would look like that, is that
desirable, or should we just add some stub:
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 236a20eaa8..e6ca350067 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -41,14 +41,16 @@
#include "hw/isa/isa.h"
#include "hw/block/fdc.h"
#include "hw/acpi/memory_hotplug.h"
+#ifdef CONFIG_TPM
#include "sysemu/tpm.h"
#include "hw/acpi/tpm.h"
-#include "hw/acpi/vmgenid.h"
#include "sysemu/tpm_backend.h"
+#endif
+#include "hw/acpi/vmgenid.h"
#include "hw/timer/mc146818rtc_regs.h"
#include "hw/mem/memory-device.h"
#include "sysemu/numa.h"
-
+#include "qemu/units.h"
/* Supported chipsets: */
#include "hw/acpi/piix4.h"
#include "hw/acpi/pcihp.h"
@@ -105,7 +107,9 @@ typedef struct AcpiPmInfo {
typedef struct AcpiMiscInfo {
bool is_piix4;
bool has_hpet;
+#ifdef CONFIG_TPM
TPMVersion tpm_version;
+#endif
const unsigned char *dsdt_code;
unsigned dsdt_size;
uint16_t pvpanic_port;
@@ -234,7 +238,9 @@ static void acpi_get_misc_info(AcpiMiscInfo *info)
}
info->has_hpet = hpet_find();
+#ifdef CONFIG_TPM
info->tpm_version = tpm_get_version(tpm_find());
+#endif
info->pvpanic_port = pvpanic_port();
info->applesmc_io_base = applesmc_port();
}
@@ -1962,10 +1968,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
}
}
+#ifdef CONFIG_TPM
if (TPM_IS_TIS(tpm_find())) {
aml_append(crs, aml_memory32_fixed(TPM_TIS_ADDR_BASE,
TPM_TIS_ADDR_SIZE, AML_READ_WRITE));
}
+#endif
aml_append(scope, aml_name_decl("_CRS", crs));
/* reserve GPE0 block resources */
@@ -2133,6 +2141,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
/* Scan all PCI buses. Generate tables to support hotplug. */
build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en);
+#ifdef CONFIG_TPM
if (TPM_IS_TIS(tpm_find())) {
dev = aml_device("ISA.TPM");
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C31")));
@@ -2149,11 +2158,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
}
-
+#endif
aml_append(sb_scope, scope);
}
}
+#ifdef CONFIG_TPM
if (TPM_IS_CRB(tpm_find())) {
dev = aml_device("TPM");
aml_append(dev, aml_name_decl("_HID", aml_string("MSFT0101")));
@@ -2168,7 +2178,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
aml_append(sb_scope, dev);
}
-
+#endif
aml_append(dsdt, sb_scope);
/* copy AML table into ACPI tables blob and patch header there */
@@ -2194,6 +2204,7 @@ build_hpet(GArray *table_data, BIOSLinker *linker)
(void *)hpet, "HPET", sizeof(*hpet), 1, NULL, NULL);
}
+#ifdef CONFIG_TPM
static void
build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog)
{
@@ -2247,6 +2258,7 @@ build_tpm2(GArray *table_data, BIOSLinker
*linker, GArray *tcpalog)
build_header(linker, table_data,
(void *)tpm2_ptr, "TPM2", sizeof(*tpm2_ptr), 4, NULL, NULL);
}
+#endif
#define HOLE_640K_START (640 * KiB)
#define HOLE_640K_END (1 * MiB)
@@ -2679,6 +2691,7 @@ void acpi_build(AcpiBuildTables *tables,
MachineState *machine)
acpi_add_table(table_offsets, tables_blob);
build_hpet(tables_blob, tables->linker);
}
+#ifdef CONFIG_TPM
if (misc.tpm_version != TPM_VERSION_UNSPEC) {
acpi_add_table(table_offsets, tables_blob);
build_tpm_tcpa(tables_blob, tables->linker, tables->tcpalog);
@@ -2688,6 +2701,7 @@ void acpi_build(AcpiBuildTables *tables,
MachineState *machine)
build_tpm2(tables_blob, tables->linker, tables->tcpalog);
}
}
+#endif
if (pcms->numa_nodes) {
acpi_add_table(table_offsets, tables_blob);
build_srat(tables_blob, tables->linker, machine);
@@ -2886,9 +2900,10 @@ void acpi_setup(void)
acpi_add_rom_blob(build_state, tables.linker->cmd_blob,
"etc/table-loader", 0);
+#ifdef CONFIG_TPM
fw_cfg_add_file(pcms->fw_cfg, ACPI_BUILD_TPMLOG_FILE,
tables.tcpalog->data, acpi_data_len(tables.tcpalog));
-
+#endif
vmgenid_dev = find_vmgenid_dev();
if (vmgenid_dev) {
vmgenid_add_fw_cfg(VMGENID(vmgenid_dev), pcms->fw_cfg,
>
> > v13:
> > - removed needless error handling in tpm_ppi_init()
> > - splitted "add ACPI memory clear interface"
> > - moved acpi build function in dedicated hw/acpi/tpm.c
> > - added some function documentation in headers
> > - various code cleanups suggested by Philippe
> > - rebased
> >
> > Marc-André Lureau (3):
> > tpm: add a "ppi" boolean property
> > acpi: add ACPI memory clear interface
> > tpm: clear RAM when "memory overwrite" requested
> >
> > Stefan Berger (3):
> > tpm: allocate/map buffer for TPM Physical Presence interface
> > acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
> > acpi: build TPM Physical Presence interface
> >
> > hw/tpm/tpm_ppi.h | 47 +++++
> > include/hw/acpi/tpm.h | 23 +++
> > include/hw/compat.h | 11 +-
> > hw/acpi/tpm.c | 447 ++++++++++++++++++++++++++++++++++++++++++
> > hw/i386/acpi-build.c | 29 ++-
> > hw/tpm/tpm_crb.c | 11 ++
> > hw/tpm/tpm_ppi.c | 53 +++++
> > hw/tpm/tpm_tis.c | 11 ++
> > docs/specs/tpm.txt | 104 ++++++++++
> > hw/acpi/Makefile.objs | 1 +
> > hw/tpm/Makefile.objs | 1 +
> > hw/tpm/trace-events | 3 +
> > 12 files changed, 738 insertions(+), 3 deletions(-)
> > create mode 100644 hw/tpm/tpm_ppi.h
> > create mode 100644 hw/acpi/tpm.c
> > create mode 100644 hw/tpm/tpm_ppi.c
> >
> > --
> > 2.20.0
>
--
Marc-André Lureau
- Re: [Qemu-devel] [PATCH v13 1/6] tpm: add a "ppi" boolean property, (continued)
- [Qemu-devel] [PATCH v13 2/6] tpm: allocate/map buffer for TPM Physical Presence interface, Marc-André Lureau, 2018/12/12
- [Qemu-devel] [PATCH v13 3/6] acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg, Marc-André Lureau, 2018/12/12
- [Qemu-devel] [PATCH v13 4/6] acpi: build TPM Physical Presence interface, Marc-André Lureau, 2018/12/12
- [Qemu-devel] [PATCH v13 5/6] acpi: add ACPI memory clear interface, Marc-André Lureau, 2018/12/12
- [Qemu-devel] [PATCH v13 6/6] tpm: clear RAM when "memory overwrite" requested, Marc-André Lureau, 2018/12/12
- Re: [Qemu-devel] [PATCH v13 0/6] Add support for TPM Physical Presence interface, Michael S. Tsirkin, 2018/12/17
- Re: [Qemu-devel] [PATCH v13 0/6] Add support for TPM Physical Presence interface,
Marc-André Lureau <=