[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 2/8] target/mips: Support R5900 specific three-op
From: |
Fredrik Noring |
Subject: |
[Qemu-devel] [PATCH v4 2/8] target/mips: Support R5900 specific three-operand MULT and MULTU |
Date: |
Sat, 15 Sep 2018 11:25:37 +0200 |
Signed-off-by: Fredrik Noring <address@hidden>
---
target/mips/translate.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index ab16cdb911..fb571e278e 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -3768,6 +3768,57 @@ static void gen_muldiv(DisasContext *ctx, uint32_t opc,
tcg_temp_free(t1);
}
+static void gen_mul_r5900(DisasContext *ctx, uint32_t opc,
+ int acc, int rd, int rs, int rt)
+{
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+
+ gen_load_gpr(t0, rs);
+ gen_load_gpr(t1, rt);
+
+ switch (opc) {
+ case OPC_MULT:
+ {
+ TCGv_i32 t2 = tcg_temp_new_i32();
+ TCGv_i32 t3 = tcg_temp_new_i32();
+ tcg_gen_trunc_tl_i32(t2, t0);
+ tcg_gen_trunc_tl_i32(t3, t1);
+ tcg_gen_muls2_i32(t2, t3, t2, t3);
+ if (rd)
+ tcg_gen_ext_i32_tl(cpu_gpr[rd], t2);
+ tcg_gen_ext_i32_tl(cpu_LO[acc], t2);
+ tcg_gen_ext_i32_tl(cpu_HI[acc], t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t3);
+ }
+ break;
+ case OPC_MULTU:
+ {
+ TCGv_i32 t2 = tcg_temp_new_i32();
+ TCGv_i32 t3 = tcg_temp_new_i32();
+ tcg_gen_trunc_tl_i32(t2, t0);
+ tcg_gen_trunc_tl_i32(t3, t1);
+ tcg_gen_mulu2_i32(t2, t3, t2, t3);
+ if (rd)
+ tcg_gen_ext_i32_tl(cpu_gpr[rd], t2);
+ tcg_gen_ext_i32_tl(cpu_LO[acc], t2);
+ tcg_gen_ext_i32_tl(cpu_HI[acc], t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t3);
+ }
+ break;
+ default:
+ MIPS_INVAL("mul R5900");
+ generate_exception_end(ctx, EXCP_RI);
+ goto out;
+ }
+
+ out:
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+}
+
static void gen_mul_vr54xx (DisasContext *ctx, uint32_t opc,
int rd, int rs, int rt)
{
@@ -22378,6 +22429,8 @@ static void decode_opc_special_legacy(CPUMIPSState
*env, DisasContext *ctx)
check_insn(ctx, INSN_VR54XX);
op1 = MASK_MUL_VR54XX(ctx->opcode);
gen_mul_vr54xx(ctx, op1, rd, rs, rt);
+ } else if (ctx->insn_flags & INSN_R5900) {
+ gen_mul_r5900(ctx, op1, 0, rd, rs, rt);
} else {
gen_muldiv(ctx, op1, rd & 3, rs, rt);
}
--
2.16.4
- [Qemu-devel] [PATCH v4 0/8] target/mips: Support R5900 GCC programs in user mode, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 1/8] target/mips: Define R5900 instructions and CPU preprocessor constants, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 2/8] target/mips: Support R5900 specific three-operand MULT and MULTU,
Fredrik Noring <=
- [Qemu-devel] [PATCH v4 3/8] target/mips: Support R5900 instructions MOVN, MOVZ and PREF from MIPS IV, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 4/8] target/mips: Add function to signal RI exception unless user only, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 5/8] target/mips: R5900 DMULT[U], DDIV[U], LL, SC, LLD and SCD are user only, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 6/8] target/mips: Define the R5900 CPU, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 7/8] linux-user/mips: Recognise the R5900 CPU model, Fredrik Noring, 2018/09/16
- [Qemu-devel] [PATCH v4 8/8] elf: Toshiba/Sony rather than MIPS are the implementors of the R5900, Fredrik Noring, 2018/09/16
- Re: [Qemu-devel] [PATCH v4 8/8] elf: Toshiba/Sony rather than MIPS are the implementors of the R5900, Philippe Mathieu-Daudé, 2018/09/16
- Re: [Qemu-devel] [PATCH v4 7/8] linux-user/mips: Recognise the R5900 CPU model, Philippe Mathieu-Daudé, 2018/09/16
- Re: [Qemu-devel] [PATCH v4 5/8] target/mips: R5900 DMULT[U], DDIV[U], LL, SC, LLD and SCD are user only, Philippe Mathieu-Daudé, 2018/09/16
- Re: [Qemu-devel] [PATCH v4 5/8] target/mips: R5900 DMULT[U], DDIV[U], LL, SC, LLD and SCD are user only, Maciej W. Rozycki, 2018/09/17