qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3] linux-user: ppc64: use the correct values for F_


From: Shivaprasad G Bhat
Subject: [Qemu-devel] [PATCH v3] linux-user: ppc64: use the correct values for F_*LK64s
Date: Fri, 13 Jul 2018 01:16:20 -0500
User-agent: StGit/0.17.1-dirty

Qemu includes the glibc headers for the host defines and target headers are
part of the qemu source themselves. The glibc has the F_GETLK64, F_SETLK64
and F_SETLKW64 defined to 12, 13 and 14 for all archs in
sysdeps/unix/sysv/linux/bits/fcntl-linux.h. The linux kernel generic
definition for F_*LK is 5, 6 & 7 and F_*LK64* is 12,13, and 14 as seen in
include/uapi/asm-generic/fcntl.h. On 64bit machine, by default the kernel
assumes all F_*LK to 64bit calls and doesnt support use of F_*LK64* as
can be seen in include/linux/fcntl.h in linux source.

On x86_64 host, the values for F_*LK64* are set to 5, 6 and 7
explicitly in /usr/include/x86_64-linux-gnu/bits/fcntl.h by the glibc.
Whereas, a PPC64 host doesn't have such a definition in
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h by the glibc. So,
the sources on PPC64 host sees the default value of F_*LK64*
as 12, 13 & 14(fcntl-linux.h).

Since the 64bit kernel doesnt support 12, 13 & 14; the glibc fcntl syscall
implementation(__libc_fcntl*(), __fcntl64_nocancel) does the F_*LK64* value
convertion back to F_*LK* values on PPC64 as seen in
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h with FCNTL_ADJUST_CMD()
macro. Whereas on x86_64 host the values for F_*LK64* are set to 5, 6 and 7
and no adjustments are needed.

Since qemu doesnt use the glibc fcntl, but makes the safe_syscall* on its
own, the PPC64 qemu is calling the syscall with 12, 13, and 14(without
adjustment) and they all fail. The fcntl calls to F_GETLK/F_SETLK|W all
fail by all pplications run on PPC64 host user emulation.

The fix here could be to see why on PPC64 the glibc is still keeping
F_*LK64* different from F_*LK and why adjusting them to 5, 6 and 7 before
the syscall for PPC only. See if we can make the
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h to have the values
5, 6 & 7 just like x86_64 and remove the adjustment code in glibc. That
way, qemu sources see the kernel supported values in glibc headers.

OR

On PPC64 host, qemu sources see both F_*LK & F_*LK64* as same and set to
12, 13 and 14 because __USE_FILE_OFFSET64 is defined in qemu
sources(also refer sysdeps/unix/sysv/linux/bits/fcntl-linux.h).
Do the value adjustment just like it is done by glibc source by using
F_GETLK value of 5. That way, we make the syscalls with the actual
supported values in Qemu. The patch is taking this approach.

Signed-off-by: Shivaprasad G Bhat <address@hidden>
---
 v2 - https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02920.html
 Changes from v2:
    - Fixed the braces, and indentation for comments.
 v1 - https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg02567.html
 Changes from v1:
    - Changed the overwrite of F*LK64* with 5, 6 and 7 in using #define
      instead using the adjustment code similar to glibc as suggested.
    - Dropped __linux__ check for the adjustment code as suggested.
    - Moved the adjustment code inside target_to_host_fcntl_cmd to address
      all possible|future cases.

 linux-user/syscall.c |   74 ++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 53 insertions(+), 21 deletions(-)

diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 643b8833de..7fb595269f 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -6475,63 +6475,95 @@ static int do_fork(CPUArchState *env, unsigned int 
flags, abi_ulong newsp,
 /* warning : doesn't handle linux specific flags... */
 static int target_to_host_fcntl_cmd(int cmd)
 {
+    int ret = -TARGET_EINVAL;
     switch(cmd) {
        case TARGET_F_DUPFD:
        case TARGET_F_GETFD:
        case TARGET_F_SETFD:
        case TARGET_F_GETFL:
        case TARGET_F_SETFL:
-            return cmd;
+            ret = cmd;
+            break;
         case TARGET_F_GETLK:
-            return F_GETLK64;
+            ret = F_GETLK64;
+            break;
         case TARGET_F_SETLK:
-            return F_SETLK64;
+            ret = F_SETLK64;
+            break;
         case TARGET_F_SETLKW:
-            return F_SETLKW64;
+            ret = F_SETLKW64;
+            break;
        case TARGET_F_GETOWN:
-           return F_GETOWN;
+            ret = F_GETOWN;
+            break;
        case TARGET_F_SETOWN:
-           return F_SETOWN;
+            ret = F_SETOWN;
+            break;
        case TARGET_F_GETSIG:
-           return F_GETSIG;
+            ret = F_GETSIG;
+            break;
        case TARGET_F_SETSIG:
-           return F_SETSIG;
+            ret = F_SETSIG;
+            break;
 #if TARGET_ABI_BITS == 32
         case TARGET_F_GETLK64:
-           return F_GETLK64;
+            ret = F_GETLK64;
+            break;
        case TARGET_F_SETLK64:
-           return F_SETLK64;
+            ret = F_SETLK64;
+            break;
        case TARGET_F_SETLKW64:
-           return F_SETLKW64;
+            ret = F_SETLKW64;
+            break;
 #endif
         case TARGET_F_SETLEASE:
-            return F_SETLEASE;
+            ret = F_SETLEASE;
+            break;
         case TARGET_F_GETLEASE:
-            return F_GETLEASE;
+            ret = F_GETLEASE;
+            break;
 #ifdef F_DUPFD_CLOEXEC
         case TARGET_F_DUPFD_CLOEXEC:
-            return F_DUPFD_CLOEXEC;
+            ret = F_DUPFD_CLOEXEC;
+            break;
 #endif
         case TARGET_F_NOTIFY:
-            return F_NOTIFY;
+            ret = F_NOTIFY;
+            break;
 #ifdef F_GETOWN_EX
        case TARGET_F_GETOWN_EX:
-           return F_GETOWN_EX;
+            ret = F_GETOWN_EX;
+            break;
 #endif
 #ifdef F_SETOWN_EX
        case TARGET_F_SETOWN_EX:
-           return F_SETOWN_EX;
+            ret = F_SETOWN_EX;
+            break;
 #endif
 #ifdef F_SETPIPE_SZ
         case TARGET_F_SETPIPE_SZ:
-            return F_SETPIPE_SZ;
+            ret = F_SETPIPE_SZ;
+            break;
         case TARGET_F_GETPIPE_SZ:
-            return F_GETPIPE_SZ;
+            ret = F_GETPIPE_SZ;
+            break;
 #endif
        default:
-            return -TARGET_EINVAL;
+            ret = -TARGET_EINVAL;
+    }
+
+#if defined(__powerpc64__)
+    /* On PPC64, glibc headers has the F_*LK* defined to 12, 13 and 14 and
+     * is not supported by kernel. The glibc fcntl call actually adjusts
+     * them to 5, 6 and 7 before making the syscall(). Since we make the
+     * syscall directly, adjust to what is supported by the kernel.
+     */
+    if (ret >= F_GETLK64 && ret <= F_SETLKW64) {
+        ret -= F_GETLK64 - 5;
     }
-    return -TARGET_EINVAL;
+#endif
+
+    return ret;
 }
 
 #define TRANSTBL_CONVERT(a) { -1, TARGET_##a, -1, a }




reply via email to

[Prev in Thread] Current Thread [Next in Thread]