[Qemu-devel] [PULL 1/1] hw/isa/smc37c669: Change the parallel I/O base to 378H

[Richard Henderson]

From: Philippe Mathieu-Daudé <address@hidden>

On the Alpha DP264 machine, the Cirrus VGA is I/O mapped
in the 3C0H-3CFH range, thus I/O base used by the parallel
device clashes, and since a4cb773928e the VGA is not
working:

(qemu) info mtree
address-space: memory
  0000000000000000-ffffffffffffffff (prio 0, i/o): system
    00000801fc000000-00000801fdffffff (prio 0, i/o): pci0-io
      ...
      00000801fc0003b4-00000801fc0003b5 (prio 0, i/o): vga
      00000801fc0003ba-00000801fc0003ba (prio 0, i/o): vga
      00000801fc0003bc-00000801fc0003c3 (prio 0, i/o): parallel
                                    ^^^                ^^^^^^^^
      00000801fc0003c0-00000801fc0003cf (prio 0, i/o): vga
                   ^^^
      00000801fc0003d4-00000801fc0003d5 (prio 0, i/o): vga
      00000801fc0003da-00000801fc0003da (prio 0, i/o): vga
      ...

As there is no particular reason to use this base address
(introduced in 7bea0dd434e), change to 378H which is the
default on PC machines.

Reported-by: Emilio G. Cota <address@hidden>
Suggested-by: Paolo Bonzini <address@hidden>
Tested-by: Emilio G. Cota <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
Reviewed-by: Mark Cave-Ayland <address@hidden>
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Message-Id: <address@hidden>
Signed-off-by: Richard Henderson <address@hidden>
---
 hw/isa/smc37c669-superio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/isa/smc37c669-superio.c b/hw/isa/smc37c669-superio.c
index aa233c6967..64466a9373 100644
--- a/hw/isa/smc37c669-superio.c
+++ b/hw/isa/smc37c669-superio.c
@@ -37,7 +37,7 @@ static bool is_parallel_enabled(ISASuperIODevice *sio, 
uint8_t index)
 
 static uint16_t get_parallel_iobase(ISASuperIODevice *sio, uint8_t index)
 {
-    return 0x3bc;
+    return 0x378;
 }
 
 static unsigned int get_parallel_irq(ISASuperIODevice *sio, uint8_t index)
-- 
2.17.1