Re: [Qemu-devel] [Qemu-block] [PATCH 1/3] block: Remove deprecated -drive geometry options

[Jeff Cody]

On Wed, Jun 13, 2018 at 02:34:56PM +0200, Kevin Wolf wrote:
> The -drive options cyls, heads, secs and trans were deprecated in
> QEMU 2.10. It's time to remove them.
> 
> hd-geo-test tested both the old version with geometry options in -drive
> and the new one with -device. Therefore the code using -drive doesn't
> have to be replaced there, we just need to remove the -drive test cases.
> 
> Signed-off-by: Kevin Wolf <address@hidden>

Reviewed-by: Jeff Cody <address@hidden>

> ---
>  include/sysemu/blockdev.h |  1 -
>  blockdev.c                | 75 
> +----------------------------------------------
>  hw/block/block.c          | 14 ---------
>  tests/hd-geo-test.c       | 18 ------------
>  hmp-commands.hx           |  1 -
>  qemu-doc.texi             |  5 ----
>  qemu-options.hx           |  7 +----
>  7 files changed, 2 insertions(+), 119 deletions(-)
> 
> diff --git a/include/sysemu/blockdev.h b/include/sysemu/blockdev.h
> index ac22f2ae1f..37ea39719e 100644
> --- a/include/sysemu/blockdev.h
> +++ b/include/sysemu/blockdev.h
> @@ -35,7 +35,6 @@ struct DriveInfo {
>      int auto_del;               /* see blockdev_mark_auto_del() */
>      bool is_default;            /* Added by default_drive() ?  */
>      int media_cd;
> -    int cyls, heads, secs, trans;
>      QemuOpts *opts;
>      char *serial;
>      QTAILQ_ENTRY(DriveInfo) next;
> diff --git a/blockdev.c b/blockdev.c
> index 4862323012..9c891706ef 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -730,22 +730,6 @@ QemuOptsList qemu_legacy_drive_opts = {
>              .type = QEMU_OPT_STRING,
>              .help = "interface (ide, scsi, sd, mtd, floppy, pflash, virtio)",
>          },{
> -            .name = "cyls",
> -            .type = QEMU_OPT_NUMBER,
> -            .help = "number of cylinders (ide disk geometry)",
> -        },{
> -            .name = "heads",
> -            .type = QEMU_OPT_NUMBER,
> -            .help = "number of heads (ide disk geometry)",
> -        },{
> -            .name = "secs",
> -            .type = QEMU_OPT_NUMBER,
> -            .help = "number of sectors (ide disk geometry)",
> -        },{
> -            .name = "trans",
> -            .type = QEMU_OPT_STRING,
> -            .help = "chs translation (auto, lba, none)",
> -        },{
>              .name = "addr",
>              .type = QEMU_OPT_STRING,
>              .help = "pci address (virtio only)",
> @@ -791,7 +775,6 @@ DriveInfo *drive_new(QemuOpts *all_opts, 
> BlockInterfaceType block_default_type)
>      QemuOpts *legacy_opts;
>      DriveMediaType media = MEDIA_DISK;
>      BlockInterfaceType type;
> -    int cyls, heads, secs, translation;
>      int max_devs, bus_id, unit_id, index;
>      const char *devaddr;
>      const char *werror, *rerror;
> @@ -802,7 +785,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, 
> BlockInterfaceType block_default_type)
>      Error *local_err = NULL;
>      int i;
>      const char *deprecated[] = {
> -        "serial", "trans", "secs", "heads", "cyls", "addr"
> +        "serial", "addr"
>      };
>  
>      /* Change legacy command line options into QMP ones */
> @@ -931,57 +914,6 @@ DriveInfo *drive_new(QemuOpts *all_opts, 
> BlockInterfaceType block_default_type)
>          type = block_default_type;
>      }
>  
> -    /* Geometry */
> -    cyls  = qemu_opt_get_number(legacy_opts, "cyls", 0);
> -    heads = qemu_opt_get_number(legacy_opts, "heads", 0);
> -    secs  = qemu_opt_get_number(legacy_opts, "secs", 0);
> -
> -    if (cyls || heads || secs) {
> -        if (cyls < 1) {
> -            error_report("invalid physical cyls number");
> -            goto fail;
> -        }
> -        if (heads < 1) {
> -            error_report("invalid physical heads number");
> -            goto fail;
> -        }
> -        if (secs < 1) {
> -            error_report("invalid physical secs number");
> -            goto fail;
> -        }
> -    }
> -
> -    translation = BIOS_ATA_TRANSLATION_AUTO;
> -    value = qemu_opt_get(legacy_opts, "trans");
> -    if (value != NULL) {
> -        if (!cyls) {
> -            error_report("'%s' trans must be used with cyls, heads and secs",
> -                         value);
> -            goto fail;
> -        }
> -        if (!strcmp(value, "none")) {
> -            translation = BIOS_ATA_TRANSLATION_NONE;
> -        } else if (!strcmp(value, "lba")) {
> -            translation = BIOS_ATA_TRANSLATION_LBA;
> -        } else if (!strcmp(value, "large")) {
> -            translation = BIOS_ATA_TRANSLATION_LARGE;
> -        } else if (!strcmp(value, "rechs")) {
> -            translation = BIOS_ATA_TRANSLATION_RECHS;
> -        } else if (!strcmp(value, "auto")) {
> -            translation = BIOS_ATA_TRANSLATION_AUTO;
> -        } else {
> -            error_report("'%s' invalid translation type", value);
> -            goto fail;
> -        }
> -    }
> -
> -    if (media == MEDIA_CDROM) {
> -        if (cyls || secs || heads) {
> -            error_report("CHS can't be set with media=cdrom");
> -            goto fail;
> -        }
> -    }
> -
>      /* Device address specified by bus/unit or index.
>       * If none was specified, try to find the first free one. */
>      bus_id  = qemu_opt_get_number(legacy_opts, "bus", 0);
> @@ -1104,11 +1036,6 @@ DriveInfo *drive_new(QemuOpts *all_opts, 
> BlockInterfaceType block_default_type)
>      dinfo = g_malloc0(sizeof(*dinfo));
>      dinfo->opts = all_opts;
>  
> -    dinfo->cyls = cyls;
> -    dinfo->heads = heads;
> -    dinfo->secs = secs;
> -    dinfo->trans = translation;
> -
>      dinfo->type = type;
>      dinfo->bus = bus_id;
>      dinfo->unit = unit_id;
> diff --git a/hw/block/block.c b/hw/block/block.c
> index b91e2b6d7e..b6c80ab0b7 100644
> --- a/hw/block/block.c
> +++ b/hw/block/block.c
> @@ -108,20 +108,6 @@ bool blkconf_geometry(BlockConf *conf, int *ptrans,
>                        unsigned cyls_max, unsigned heads_max, unsigned 
> secs_max,
>                        Error **errp)
>  {
> -    DriveInfo *dinfo;
> -
> -    if (!conf->cyls && !conf->heads && !conf->secs) {
> -        /* try to fall back to value set with legacy -drive cyls=... */
> -        dinfo = blk_legacy_dinfo(conf->blk);
> -        if (dinfo) {
> -            conf->cyls  = dinfo->cyls;
> -            conf->heads = dinfo->heads;
> -            conf->secs  = dinfo->secs;
> -            if (ptrans) {
> -                *ptrans = dinfo->trans;
> -            }
> -        }
> -    }
>      if (!conf->cyls && !conf->heads && !conf->secs) {
>          hd_geometry_guess(conf->blk,
>                            &conf->cyls, &conf->heads, &conf->secs,
> diff --git a/tests/hd-geo-test.c b/tests/hd-geo-test.c
> index 24870b38f4..d263a74ec0 100644
> --- a/tests/hd-geo-test.c
> +++ b/tests/hd-geo-test.c
> @@ -347,22 +347,6 @@ static void test_ide_drive_user(const char *dev, bool 
> trans)
>  }
>  
>  /*
> - * Test case: IDE device (if=ide) with explicit CHS
> - */
> -static void test_ide_drive_user_chs(void)
> -{
> -    test_ide_drive_user(NULL, false);
> -}
> -
> -/*
> - * Test case: IDE device (if=ide) with explicit CHS and translation
> - */
> -static void test_ide_drive_user_chst(void)
> -{
> -    test_ide_drive_user(NULL, true);
> -}
> -
> -/*
>   * Test case: IDE device (if=none) with explicit CHS
>   */
>  static void test_ide_device_user_chs(void)
> @@ -422,8 +406,6 @@ int main(int argc, char **argv)
>      qtest_add_func("hd-geo/ide/drive/mbr/blank", test_ide_drive_mbr_blank);
>      qtest_add_func("hd-geo/ide/drive/mbr/lba", test_ide_drive_mbr_lba);
>      qtest_add_func("hd-geo/ide/drive/mbr/chs", test_ide_drive_mbr_chs);
> -    qtest_add_func("hd-geo/ide/drive/user/chs", test_ide_drive_user_chs);
> -    qtest_add_func("hd-geo/ide/drive/user/chst", test_ide_drive_user_chst);
>      qtest_add_func("hd-geo/ide/drive/cd_0", test_ide_drive_cd_0);
>      qtest_add_func("hd-geo/ide/device/mbr/blank", test_ide_device_mbr_blank);
>      qtest_add_func("hd-geo/ide/device/mbr/lba", test_ide_device_mbr_lba);
> diff --git a/hmp-commands.hx b/hmp-commands.hx
> index 0734fea931..0de7c4c29e 100644
> --- a/hmp-commands.hx
> +++ b/hmp-commands.hx
> @@ -1283,7 +1283,6 @@ ETEXI
>          .params     = "[-n] [[<domain>:]<bus>:]<slot>\n"
>                        "[file=file][,if=type][,bus=n]\n"
>                        "[,unit=m][,media=d][,index=i]\n"
> -                      "[,cyls=c,heads=h,secs=s[,trans=t]]\n"
>                        "[,snapshot=on|off][,cache=on|off]\n"
>                        "[,readonly=on|off][,copy-on-read=on|off]",
>          .help       = "add drive to PCI storage controller",
> diff --git a/qemu-doc.texi b/qemu-doc.texi
> index cd05760cac..ab95bffc74 100644
> --- a/qemu-doc.texi
> +++ b/qemu-doc.texi
> @@ -2850,11 +2850,6 @@ with ``-device ...,netdev=x''), or ``-nic 
> user,smb=/some/dir''
>  (for embedded NICs). The new syntax allows different settings to be
>  provided per NIC.
>  
> address@hidden -drive cyls=...,heads=...,secs=...,trans=... (since 2.10.0)
> -
> -The drive geometry arguments are replaced by the the geometry arguments
> -that can be specified with the ``-device'' parameter.
> -
>  @subsection -drive serial=... (since 2.10.0)
>  
>  The drive serial argument is replaced by the the serial argument
> diff --git a/qemu-options.hx b/qemu-options.hx
> index c0d3951e9f..a14b9655c5 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -804,9 +804,8 @@ ETEXI
>  
>  DEF("drive", HAS_ARG, QEMU_OPTION_drive,
>      "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
> -    "       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
>      "       
> [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
> -    "       [,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
> +    "       
> [,snapshot=on|off][,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
>      "       
> [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n"
>      "       [,readonly=on|off][,copy-on-read=on|off]\n"
>      "       [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]\n"
> @@ -847,10 +846,6 @@ This option defines where is connected the drive by 
> using an index in the list
>  of available connectors of a given interface type.
>  @item address@hidden
>  This option defines the type of the media: disk or cdrom.
> address@hidden address@hidden,address@hidden,address@hidden,address@hidden
> -Force disk physical geometry and the optional BIOS translation (trans=none or
> -lba). These parameters are deprecated, use the corresponding parameters
> -of @code{-device} instead.
>  @item address@hidden
>  @var{snapshot} is "on" or "off" and controls snapshot mode for the given 
> drive
>  (see @option{-snapshot}).
> -- 
> 2.13.6
> 
>