[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1686170] Re: qemu-system-x86_64+gdb: unable to correct
From: |
Vladislav K. Valtchev |
Subject: |
[Qemu-devel] [Bug 1686170] Re: qemu-system-x86_64+gdb: unable to correctly disassemble "real mode" (i8086) instructions after attaching to QEMU started with "-S -s" options |
Date: |
Sat, 12 May 2018 12:10:29 -0000 |
Hi,
are there any updates on this issue?
I'm using qemu 2.11.1 and I believe I'm experiencing the same problem explained
by Duane.
I'm unable to debug with gdb 32-bit kernel code using qemu-system-x86_64. GDB
complains that the target architecture is x86_64, even if VM's CPU is currently
running in 32-bit protected mode.
Steps to reproduce:
- qemu-system-x86_64 -s -hda <a bootable image using PM32> [note: no need to
use -S]
- gdb
- (in gdb): set arch i386
- (in gdb): target remote localhost:1234 [note: no need to specify an ELF
binary]
I get:
Remote debugging using localhost:1234
warning: Selected architecture i386 is not compatible with reported target
architecture i386:x86-64
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
Remote 'g' packet reply is too long (expected 312 bytes, got 536 bytes):
[SKIPPING the raw data]
Unfortunately, I was unable to find any workaround.
Not even patching GDB as suggested here
https://wiki.osdev.org/QEMU_and_GDB_in_long_mode
really works (because forcing GDB to ignore the exceeding data, does not really
solve the whole problem).
I remember that with older versions of qemu the behavior was different
and by just using gdb's "set arch" command I was able to debug both
32-bit and 64-bit code running on a x86_64 qemu VM.
Could the older behavior be restored somehow? Even by adding an ad-hoc
command-line option would be OK.
Thanks a lot,
Vlad
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1686170
Title:
qemu-system-x86_64+gdb: unable to correctly disassemble "real mode"
(i8086) instructions after attaching to QEMU started with "-S -s"
options
Status in QEMU:
New
Bug description:
OS: Void Linux x86_64 (glibc)
QEMU version: 2.9.0
GDB version: 7.12.1
Problem description:
After I updated QEMU from version 2.8.1 to 2.9.0, I found that when I try to
connect GDB to a running QEMU and try to debug Real mode machine code, I can no
longer set architecture to 'i8086'.
To be able to connect to QEMU from GDB at all, I have to specify one of the
64 bit architectures, which among other things leads to incorrect disassembly
listings. This makes debugging Real mode bootloaders, bootsectors and BIOS code
much more difficult.
Steps to reproduce:
- Run QEMU
- In another terminal, run GDB
- In GDB, connect to QEMU
- In GDB, disassemble some Real mode machine code.
Expected results (from QEMU version 2.8.1):
[terminal #1]
$ qemu-system-x86_64 -S -s
[terminal #2]
(gdb) set architecture i8086
warning: A handler for the OS ABI "GNU/Linux" is not built
into this configuration
of GDB. Attempting to continue with the default i8086 settings.
The target architecture is assumed to be i8086
(gdb) target remote :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x0000fff0 in ?? ()
(gdb) x/i $cs*16+$eip
0xffff0: ljmp $0xf000,$0xe05b
Actual results:
[terminal #1]
$ qemu-system-x86_64 -S -s
[terminal #2]
$ gdb -q
(gdb) set architecture i8086
warning: A handler for the OS ABI "GNU/Linux" is not built into this
configuration
of GDB. Attempting to continue with the default i8086 settings.
The target architecture is assumed to be i8086
(gdb) target remote :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
Remote 'g' packet reply is too long:
[..snip..]
Workarounds tried:
- Try different architecures
(gdb) set architecture i386:intel
The target architecture is assumed to be i386:intel
(gdb) target remote :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
Remote 'g' packet reply is too long:
[..snip..]
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) target remote :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x000000000000fff0 in ?? ()
The last try finally allowed me to connect to QEMU, but as can be
expected from using an incorrect architecture setting, disassembly
output is complete gibberish:
(gdb) x/10i $cs*16+$rip
0xffff0: (bad)
0xffff1: pop %rbx
0xffff2: loopne 0xffff4
0xffff4: lock xor %dh,(%rsi)
0xffff7: (bad)
0xffff8: xor (%rbx),%dh
0xffffa: (bad)
0xffffb: cmp %edi,(%rcx)
0xffffd: add %bh,%ah
0xfffff: add %al,(%rax)
Discussion:
I think I've traced the problem to the following commit: "x86: Fix x86_64 'g'
packet response to gdb from 32-bit mode."[1].
While I admire the effort to make life for people using GDB to debug QEMU
VMs, I think the problem here is with GDB and can't be fixed entirely from the
side of QEMU without breaking other features.
In fact, there is a well-known workaround to this problem published on
OSDev Wiki (Workaround #1)[2] which doesn't require patching either
QEMU or GDB. This workaround has worked for me using several previous
versions of QEMU.
$ gdb -q
(gdb) set architecture i8086
(gdb) target remote :1234
(gdb) break some_breakpoint_in_32_bit_or_64_bit_code
(gdb) continue
[...]
Remote 'g' packet reply is too long: [...]
(gdb) disconnect # IMPORTANT STEP #1
(gdb) set architecture i386:x86-64
(gdb) target remote :1234 # IMPORTANT STEP #2
(gdb) continue
[1]:
http://git.qemu.org/?p=qemu.git;a=commit;h=e3592bc9d841c397eeda87f0019fab94ff71004b
[2]:
http://wiki.osdev.org/QEMU_and_GDB_in_long_mode#Workaround_1:_Reconnecting
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1686170/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 1686170] Re: qemu-system-x86_64+gdb: unable to correctly disassemble "real mode" (i8086) instructions after attaching to QEMU started with "-S -s" options,
Vladislav K. Valtchev <=