Re: [Qemu-devel] [qemu-s390x] [PATCH v4 0/3] pc-bios/s390-ccw: Some few network boot improvements

[Christian Borntraeger]

On 04/26/2018 11:28 AM, Thomas Huth wrote:
> Note: I've decided to removed the pxelinux.cfg patches from this series
> for now, since full pxelinux support requires to parse some additional
> DHCP options (see https://tools.ietf.org/html/rfc5071), and for this, the
> SLOF libnet code needs to be changed first. So I guess I first have to
> implement pxelinux.cfg support for PPC, too, which will likely take a
> little bit longer...
> Thus to keep this series short and reviewable, and to avoid that the other
> patches bit-rot on my hard disk, I've now only included the patches that
> are not related to pxelinux.cfg.
> 
> The first patch is just a minor code refactoring which should not have
> any visible impact, but makes the following patches easier.
> 
> The second patch makes sure that we leave the machine in a sane state
> before jumping into the Linux kernel - i.e. the netboot firmware now
> resets the machine with diag308, too, just like the main s390-ccw
> is doing it already.
> 
> Patch 3 adds support for loading kernels via .INS configuration files.
> You can find these .INS config files on ISO images, so with this patch,
> it should be possible to boot if the TFTP server is configured to use
> the contents of such an ISO image.
> 
> v4:
>  - s/uninit/release/ in the title of the first patch
>  - Set schid of the network device in 184
>  - Jump to 0x10000 start address if S390EP magic is available
> 
> Thomas Huth (3):
>   pc-bios/s390-ccw/net: Split up net_load() into init, load and release
>     parts
>   pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to
>     the OS
>   pc-bios/s390-ccw/net: Add support for .INS config files
> 
>  pc-bios/s390-ccw/Makefile    |   4 +-
>  pc-bios/s390-ccw/bootmap.c   |  63 +---------------
>  pc-bios/s390-ccw/bootmap.h   |   4 --
>  pc-bios/s390-ccw/jump2ipl.c  |  91 +++++++++++++++++++++++
>  pc-bios/s390-ccw/netboot.mak |   3 +-
>  pc-bios/s390-ccw/netmain.c   | 168 
> +++++++++++++++++++++++++++++++++++--------
>  pc-bios/s390-ccw/s390-ccw.h  |   4 ++
>  7 files changed, 240 insertions(+), 97 deletions(-)
>  create mode 100644 pc-bios/s390-ccw/jump2ipl.c
> 


Not looked into all details but the general idea and patches

Acked-by: Christian Borntraeger <address@hidden>