[Qemu-devel] [PATCH v3 0/3] pc-bios/s390-ccw: Some few network boot improvements

[Thomas Huth]

Note: I've decided to removed the pxelinux.cfg patches from this series
for now, since full pxelinux support requires to parse some additional
DHCP options (see https://tools.ietf.org/html/rfc5071), and for this, the
SLOF libnet code needs to be changed first. So I guess I first have to
implement pxelinux.cfg support for PPC, too, which will likely take a
little bit longer...
Thus to keep this series short and reviewable, and to avoid that the other
patches bit-rot on my hard disk, I've now only included the patches that
are not related to pxelinux.cfg.

The first patch is just a minor code refactoring which should not have
any visible impact, but makes the following patches easier.

The second patch makes sure that we leave the machine in a sane state
before jumping into the Linux kernel - i.e. the netboot firmware now
resets the machine with diag308, too, just like the main s390-ccw
is doing it already.

Patch 3 adds support for loading kernels via .INS configuration files.
You can find these .INS config files on ISO images, so with this patch,
it should be possible to boot if the TFTP server is configured to use
the contents of such an ISO image.

Thomas Huth (3):
  pc-bios/s390-ccw/net: Split up net_load() into init, load and uninit
    parts
  pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to
    the OS
  pc-bios/s390-ccw/net: Add support for .INS config files

 pc-bios/s390-ccw/Makefile    |   4 +-
 pc-bios/s390-ccw/bootmap.c   |  63 +---------------
 pc-bios/s390-ccw/bootmap.h   |   4 --
 pc-bios/s390-ccw/jump2ipl.c  |  81 +++++++++++++++++++++
 pc-bios/s390-ccw/netboot.mak |   3 +-
 pc-bios/s390-ccw/netmain.c   | 168 +++++++++++++++++++++++++++++++++++--------
 pc-bios/s390-ccw/s390-ccw.h  |   4 ++
 7 files changed, 230 insertions(+), 97 deletions(-)
 create mode 100644 pc-bios/s390-ccw/jump2ipl.c

-- 
1.8.3.1