qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 10/14] hw/ppc: Replace fprintf(stderr, "*\n" with err


From: Markus Armbruster
Subject: [Qemu-devel] [PULL 10/14] hw/ppc: Replace fprintf(stderr, "*\n" with error_report()
Date: Tue, 6 Feb 2018 20:50:40 +0100

From: Alistair Francis <address@hidden>

Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.

find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N; {s|fprintf(stderr, 
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' 
\
    {} +
find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +

Some lines were then manually tweaked to pass checkpatch and some curly
braces were added to match QEMU style.

Signed-off-by: Alistair Francis <address@hidden>
Cc: address@hidden

Conversions that aren't followed by exit() dropped, because they might
be inappropriate.

Also trim trailing punctuation from error messages.

Signed-off-by: Markus Armbruster <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Message-Id: <address@hidden>
---
 hw/ppc/e500.c          | 16 ++++++++--------
 hw/ppc/mac_newworld.c  |  2 +-
 hw/ppc/mac_oldworld.c  |  2 +-
 hw/ppc/ppc405_boards.c | 15 ++++++---------
 hw/ppc/ppc440_bamboo.c | 16 ++++++++--------
 hw/ppc/prep.c          |  4 ++--
 hw/ppc/virtex_ml507.c  |  4 ++--
 7 files changed, 28 insertions(+), 31 deletions(-)

diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index c4fe06ea2a..343bba93ce 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -811,8 +811,8 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
         cs = CPU(cpu);
 
         if (env->mmu_model != POWERPC_MMU_BOOKE206) {
-            fprintf(stderr, "MMU model %i not supported by this machine.\n",
-                env->mmu_model);
+            error_report("MMU model %i not supported by this machine",
+                         env->mmu_model);
             exit(1);
         }
 
@@ -959,8 +959,8 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
                                           cur_base,
                                           ram_size - cur_base);
         if (kernel_size < 0) {
-            fprintf(stderr, "qemu: could not load kernel '%s'\n",
-                    machine->kernel_filename);
+            error_report("could not load kernel '%s'",
+                         machine->kernel_filename);
             exit(1);
         }
 
@@ -974,8 +974,8 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
                                           ram_size - initrd_base);
 
         if (initrd_size < 0) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    machine->initrd_filename);
+            error_report("could not load initial ram disk '%s'",
+                         machine->initrd_filename);
             exit(1);
         }
 
@@ -1016,7 +1016,7 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
         kernel_size = load_uimage(filename, &bios_entry, &loadaddr, NULL,
                                   NULL, NULL);
         if (kernel_size < 0) {
-            fprintf(stderr, "qemu: could not load firmware '%s'\n", filename);
+            error_report("could not load firmware '%s'", filename);
             exit(1);
         }
     }
@@ -1029,7 +1029,7 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
                                        initrd_base, initrd_size,
                                        kernel_base, kernel_size);
     if (dt_size < 0) {
-        fprintf(stderr, "couldn't load device tree\n");
+        error_report("couldn't load device tree");
         exit(1);
     }
     assert(dt_size < DTB_MAX_SIZE);
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 3fa7c429d5..b832417a56 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -270,7 +270,7 @@ static void ppc_core99_init(MachineState *machine)
             }
         }
         if (ppc_boot_device == '\0') {
-            fprintf(stderr, "No valid boot device for Mac99 machine\n");
+            error_report("No valid boot device for Mac99 machine");
             exit(1);
         }
     }
diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 010ea36bf2..d1f4546613 100644
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -218,7 +218,7 @@ static void ppc_heathrow_init(MachineState *machine)
 #endif
         }
         if (ppc_boot_device == '\0') {
-            fprintf(stderr, "No valid boot device for G3 Beige machine\n");
+            error_report("No valid boot device for G3 Beige machine");
             exit(1);
         }
     }
diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
index 6f7f2ee168..0b658931ee 100644
--- a/hw/ppc/ppc405_boards.c
+++ b/hw/ppc/ppc405_boards.c
@@ -331,8 +331,7 @@ static void ref405ep_init(MachineState *machine)
         kernel_size = load_image_targphys(kernel_filename, kernel_base,
                                           ram_size - kernel_base);
         if (kernel_size < 0) {
-            fprintf(stderr, "qemu: could not load kernel '%s'\n",
-                    kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         printf("Load kernel size %ld at " TARGET_FMT_lx,
@@ -343,8 +342,8 @@ static void ref405ep_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                        initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
         } else {
@@ -621,8 +620,7 @@ static void taihu_405ep_init(MachineState *machine)
         kernel_size = load_image_targphys(kernel_filename, kernel_base,
                                           ram_size - kernel_base);
         if (kernel_size < 0) {
-            fprintf(stderr, "qemu: could not load kernel '%s'\n",
-                    kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -631,9 +629,8 @@ static void taihu_405ep_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                fprintf(stderr,
-                        "qemu: could not load initial ram disk '%s'\n",
-                        initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
         } else {
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index a299206fd4..8641986a71 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -12,6 +12,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/error-report.h"
 #include "qemu-common.h"
 #include "qemu/error-report.h"
 #include "net/net.h"
@@ -188,8 +189,8 @@ static void bamboo_init(MachineState *machine)
     env = &cpu->env;
 
     if (env->mmu_model != POWERPC_MMU_BOOKE) {
-        fprintf(stderr, "MMU model %i not supported by this machine.\n",
-            env->mmu_model);
+        error_report("MMU model %i not supported by this machine",
+                     env->mmu_model);
         exit(1);
     }
 
@@ -229,7 +230,7 @@ static void bamboo_init(MachineState *machine)
                                 NULL);
     pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
     if (!pcibus) {
-        fprintf(stderr, "couldn't create PCI controller!\n");
+        error_report("couldn't create PCI controller");
         exit(1);
     }
 
@@ -270,8 +271,7 @@ static void bamboo_init(MachineState *machine)
         }
         /* XXX try again as binary */
         if (success < 0) {
-            fprintf(stderr, "qemu: could not load kernel '%s'\n",
-                    kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
     }
@@ -282,8 +282,8 @@ static void bamboo_init(MachineState *machine)
                                           ram_size - RAMDISK_ADDR);
 
         if (initrd_size < 0) {
-            fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
-                    initrd_filename, RAMDISK_ADDR);
+            error_report("could not load ram disk '%s' at %x",
+                         initrd_filename, RAMDISK_ADDR);
             exit(1);
         }
     }
@@ -292,7 +292,7 @@ static void bamboo_init(MachineState *machine)
     if (kernel_filename) {
         if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
                                     initrd_size, kernel_cmdline) < 0) {
-            fprintf(stderr, "couldn't load device tree\n");
+            error_report("couldn't load device tree");
             exit(1);
         }
     }
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index af08ac319a..096d4d4cfb 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -574,7 +574,7 @@ static void ppc_prep_init(MachineState *machine)
             }
         }
         if (ppc_boot_device == '\0') {
-            fprintf(stderr, "No valid boot device for Mac99 machine\n");
+            error_report("No valid boot device for Mac99 machine");
             exit(1);
         }
     }
@@ -595,7 +595,7 @@ static void ppc_prep_init(MachineState *machine)
     qdev_init_nofail(dev);
     pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
     if (pci_bus == NULL) {
-        fprintf(stderr, "Couldn't create PCI host controller.\n");
+        error_report("Couldn't create PCI host controller");
         exit(1);
     }
     sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0);
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index 9fe7655074..485d9affb2 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -223,8 +223,8 @@ static void virtex_init(MachineState *machine)
     env = &cpu->env;
 
     if (env->mmu_model != POWERPC_MMU_BOOKE) {
-        fprintf(stderr, "MMU model %i not supported by this machine.\n",
-            env->mmu_model);
+        error_report("MMU model %i not supported by this machine",
+                     env->mmu_model);
         exit(1);
     }
 
-- 
2.13.6




reply via email to

[Prev in Thread] Current Thread [Next in Thread]