Re: [Qemu-devel] [PATCH 2/2] virtio: fix IO request length in virtio SCSI/block

[Denis V. Lunev]

On 12/18/2017 10:35 PM, Felipe Franciosi wrote:
>> On 18 Dec 2017, at 16:16, Harris, James R <address@hidden> wrote:
>>
>>
>>> On Dec 18, 2017, at 6:38 AM, Stefan Hajnoczi <address@hidden> wrote:
>>>
>>> On Fri, Dec 15, 2017 at 06:02:50PM +0300, Denis V. Lunev wrote:
>>>> Linux guests submit IO requests no longer than PAGE_SIZE * max_seg
>>>> field reported by SCSI controler. Thus typical sequential read with
>>>> 1 MB size results in the following pattern of the IO from the guest:
>>>> 8,16   1    15754     2.766095122  2071  D   R 2095104 + 1008 [dd]
>>>> 8,16   1    15755     2.766108785  2071  D   R 2096112 + 1008 [dd]
>>>> 8,16   1    15756     2.766113486  2071  D   R 2097120 + 32 [dd]
>>>> 8,16   1    15757     2.767668961     0  C   R 2095104 + 1008 [0]
>>>> 8,16   1    15758     2.768534315     0  C   R 2096112 + 1008 [0]
>>>> 8,16   1    15759     2.768539782     0  C   R 2097120 + 32 [0]
>>>> The IO was generated by
>>>> dd if=/dev/sda of=/dev/null bs=1024 iflag=direct
>>>>
>>>> This effectively means that on rotational disks we will observe 3 IOPS
>>>> for each 2 MBs processed. This definitely negatively affects both
>>>> guest and host IO performance.
>>>>
>>>> The cure is relatively simple - we should report lengthy scatter-gather
>>>> ability of the SCSI controller. Fortunately the situation here is very
>>>> good. VirtIO transport layer can accomodate 1024 items in one request
>>>> while we are using only 128. This situation is present since almost
>>>> very beginning. 2 items are dedicated for request metadata thus we
>>>> should publish VIRTQUEUE_MAX_SIZE - 2 as max_seg.
>>>>
>>>> The following pattern is observed after the patch:
>>>> 8,16   1     9921     2.662721340  2063  D   R 2095104 + 1024 [dd]
>>>> 8,16   1     9922     2.662737585  2063  D   R 2096128 + 1024 [dd]
>>>> 8,16   1     9923     2.665188167     0  C   R 2095104 + 1024 [0]
>>>> 8,16   1     9924     2.665198777     0  C   R 2096128 + 1024 [0]
>>>> which is much better.
>>>>
>>>> The dark side of this patch is that we are tweaking guest visible
>>>> parameter, though this should be relatively safe as above transport
>>>> layer support is present in QEMU/host Linux for a very long time.
>>>> The patch adds configurable property for VirtIO SCSI with a new default
>>>> and hardcode option for VirtBlock which does not provide good
>>>> configurable framework.
>>>>
>>>> Signed-off-by: Denis V. Lunev <address@hidden>
>>>> CC: "Michael S. Tsirkin" <address@hidden>
>>>> CC: Stefan Hajnoczi <address@hidden>
>>>> CC: Kevin Wolf <address@hidden>
>>>> CC: Max Reitz <address@hidden>
>>>> CC: Paolo Bonzini <address@hidden>
>>>> CC: Richard Henderson <address@hidden>
>>>> CC: Eduardo Habkost <address@hidden>
>>>> ---
>>>> include/hw/compat.h             | 17 +++++++++++++++++
>>>> include/hw/virtio/virtio-blk.h  |  1 +
>>>> include/hw/virtio/virtio-scsi.h |  1 +
>>>> hw/block/virtio-blk.c           |  4 +++-
>>>> hw/scsi/vhost-scsi.c            |  2 ++
>>>> hw/scsi/vhost-user-scsi.c       |  2 ++
>>>> hw/scsi/virtio-scsi.c           |  4 +++-
>>>> 7 files changed, 29 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/include/hw/compat.h b/include/hw/compat.h
>>>> index 026fee9..b9be5d7 100644
>>>> --- a/include/hw/compat.h
>>>> +++ b/include/hw/compat.h
>>>> @@ -2,6 +2,23 @@
>>>> #define HW_COMPAT_H
>>>>
>>>> #define HW_COMPAT_2_11 \
>>>> +    {\
>>>> +        .driver   = "virtio-blk-device",\
>>>> +        .property = "max_segments",\
>>>> +        .value    = "126",\
>>>> +    },{\
>>>> +        .driver   = "vhost-scsi",\
>>>> +        .property = "max_segments",\
>>>> +        .value    = "126",\
>>>> +    },{\
>>>> +        .driver   = "vhost-user-scsi",\
>>>> +        .property = "max_segments",\
>>>> +        .value    = "126",\
>>> Existing vhost-user-scsi slave programs might not expect up to 1022
>>> segments.  Hopefully we can get away with this change since there are
>>> relatively few vhost-user-scsi slave programs.
>>>
>>> CCed Felipe (Nutanix) and Jim (SPDK) in case they have comments.
>> SPDK vhost-user targets only expect max 128 segments.  They also 
>> pre-allocate I/O task structures when QEMU connects to the vhost-user device.
>>
>> Supporting up to 1022 segments would result in significantly higher memory 
>> usage, reduction in I/O queue depth processed by the vhost-user target, or 
>> having to dynamically allocate I/O task structures - none of which are ideal.
>>
>> What if this was just bumped from 126 to 128?  I guess I’m trying to 
>> understand the level of guest and host I/O performance that is gained with 
>> this patch.  One I/O per 512KB vs. one I/O per 4MB - we are still only 
>> talking about a few hundred IO/s difference.
> SeaBIOS also makes the assumption that the queue size is not bigger than 128 
> elements.
> https://review.coreboot.org/cgit/seabios.git/tree/src/hw/virtio-ring.h#n23
>
> Perhaps a better approach is to make the value configurable (ie. add the 
> "max_segments" property), but set the default to 128-2. In addition to what 
> Jim pointed out, I think there may be other legacy front end drivers which 
> can assume the ring will be at most 128 entries in size.
>
> With that, hypervisors can choose to bump the value higher if it's known to 
> be safe for their host+guest configuration.

This should not be a problem at all IMHO. The guest is not obliged
to use the message of entire possible size. The guest initiates
request with 128 elements. Fine. QEMU is ready to this.

Den