[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integratio
From: |
Linu Cherian |
Subject: |
Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration |
Date: |
Wed, 27 Sep 2017 14:51:47 +0530 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Wed Sep 27, 2017 at 10:55:07AM +0200, Auger Eric wrote:
> Hi Linu,
>
> On 27/09/2017 10:30, Bharat Bhushan wrote:
> > Hi,
> >
> >> -----Original Message-----
> >> From: Linu Cherian [mailto:address@hidden
> >> Sent: Wednesday, September 27, 2017 1:11 PM
> >> To: Bharat Bhushan <address@hidden>
> >> Cc: address@hidden; address@hidden;
> >> address@hidden; address@hidden; address@hidden;
> >> address@hidden; address@hidden; address@hidden;
> >> address@hidden; address@hidden; address@hidden;
> >> address@hidden; address@hidden; address@hidden;
> >> address@hidden
> >> Subject: Re: [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration
> >>
> >> Hi,
> >>
> >> On Wed Sep 27, 2017 at 12:03:15PM +0530, Bharat Bhushan wrote:
> >>> This patch series integrates VFIO/VHOST with virtio-iommu.
> >>>
> >>> This version is mainly about rebasing on v4 version on virtio-iommu
> >>> device framework from Eric Augur and addresing review comments.
> >>>
> >>> This patch series allows PCI pass-through using virtio-iommu.
> >>>
> >>> This series is based on:
> >>> - virtio-iommu kernel driver by Jean-Philippe Brucker
> >>> [1] [RFC] virtio-iommu version 0.4
> >>> git://linux-arm.org/virtio-iommu.git branch viommu/v0.4
>
> Just to make sure, do you use the v0.4 virtio-iommu driver from above
> branch?
>
> Thanks
I am using git://linux-arm.org/linux-jpb.git branch virtio-iommu/v0.4.
Hope you are referring to the same.
>
> Eric
> >>>
> >>> - virtio-iommu device emulation by Eric Augur.
> >>> [RFC v4 00/16] VIRTIO-IOMMU device
> >>> https://github.com/eauger/qemu/tree/v2.10.0-virtio-iommu-v4
> >>>
> >>> Changes are available at : https://github.com/bharaty/qemu.git
> >>> virtio-iommu-vfio-integration-v4
> >>>
> >>
> >> # With the above sources, was trying to test the vfio-pci device assigned
> >> to
> >> guest using Qemu.
> >> # Both guest and host kernels are configured with 4k as page size.
> >> # releavant qemu command snippet,
> >> -device virtio-iommu-device -device virtio-blk-device,drive=hd0 \
> >> -net none -device vfio-pci,host=xxx
> >>
> >>
> >> On guest booting, observed mutliple messages as below,
> >>
> >> qemu-system-aarch64: iommu has granularity incompatible with target AS
> >>
> >> # On adding necessary prints, 0x5000 is len, 0x4fff is address mask
> >> and the code expects the address mask to be 0xfff.
> >
> > I have not seen these errors, I am also using 4K page-size on both host and
> > guest. Can you share compete qemu command and log.
> >
> > Thanks
> > -Bharat
> >
> >>
> >> if (len & iotlb->addr_mask) {
> >> error_report
> >>
> >> # vfio_dma_map is failing due to this error.
> >>
> >> Any pointers ?
> >>
> >>
> >>> v3->v4:
> >>> - Rebase to v4 version from Eric
> >>> - Fixes from Eric with DPDK in VM
> >>> - Logical division in multiple patches
> >>>
> >>> v2->v3:
> >>> - This series is based on "[RFC v3 0/8] VIRTIO-IOMMU device"
> >>> Which is based on top of v2.10-rc0 that
> >>> - Fixed issue with two PCI devices
> >>> - Addressed review comments
> >>>
> >>> v1->v2:
> >>> - Added trace events
> >>> - removed vSMMU3 link in patch description
> >>>
> >>> Bharat Bhushan (5):
> >>> target/arm/kvm: Translate the MSI doorbell in
> >> kvm_arch_fixup_msi_route
> >>> virtio-iommu: Add iommu notifier for map/unmap
> >>> virtio-iommu: Call iommu notifier for attach/detach
> >>> virtio-iommu: add iommu replay
> >>> virtio-iommu: add iommu notifier memory-region
> >>>
> >>> hw/virtio/trace-events | 5 ++
> >>> hw/virtio/virtio-iommu.c | 181
> >> ++++++++++++++++++++++++++++++++++++++-
> >>> include/hw/virtio/virtio-iommu.h | 6 ++
> >>> target/arm/kvm.c | 27 ++++++
> >>> target/arm/trace-events | 3 +
> >>> 5 files changed, 219 insertions(+), 3 deletions(-)
> >>>
> >>> --
> >>> 1.9.3
> >>>
> >>>
> >>
> >> --
> >> Linu cherian
--
Linu cherian
- [Qemu-devel] [PATCH v4 4/5] virtio-iommu: add iommu replay, (continued)
- [Qemu-devel] [PATCH v4 4/5] virtio-iommu: add iommu replay, Bharat Bhushan, 2017/09/27
- [Qemu-devel] [PATCH v4 3/5] virtio-iommu: Call iommu notifier for attach/detach, Bharat Bhushan, 2017/09/27
- [Qemu-devel] [PATCH v4 5/5] virtio-iommu: add iommu notifier memory-region, Bharat Bhushan, 2017/09/27
- Re: [Qemu-devel] [PATCH v4 0/5] virtio-iommu: VFIO integration, Bharat Bhushan, 2017/09/27
- Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration, Linu Cherian, 2017/09/27
- Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration, Linu Cherian, 2017/09/27