[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-ppc] e5500 pcce500 disabled network and no video
From: |
luigi burdo |
Subject: |
Re: [Qemu-devel] [Qemu-ppc] e5500 pcce500 disabled network and no video on device virtio-gpu or virtio gpu-pci |
Date: |
Mon, 4 Sep 2017 14:38:32 +0000 |
i found probably another issue,
i cant made the img boot if i run qemu 2.10 build on an X86_64 (endianess?).
tested on qemu 2.10 on MacOsx 10.12 and on Ubuntu Mate 17.04 (amd64)
this issue is present if i choose -hda instead -device file= too
[ 8.564326] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.569373] ata6.00: failed to IDENTIFY (INIT_DEV_PARAMS failed,
err_mask=0x80)
[ 8.575744] ata6: limiting SATA link speed to 1.5 Gbps
[ 14.195086] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.200326] ata6.00: failed to IDENTIFY (INIT_DEV_PARAMS failed,
err_mask=0x80)
[ 19.828186] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)[
19.867419] VFS: Cannot open root device "sda2" or unknown-block(0,0): error -6
[ 19.872611] Please append a correct "root=" boot option; here are the availa
[ 19.967119] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Luigi
Oggetto: [Qemu-ppc] e5500 pcce500 disabled network and no video on device
virtio-gpu or virtio gpu-pci
Hi all,
like the topic i cant made the machine goes online plus the video output don
work.
on this email i made the links with
kernel 411 with virtio,bochs etc etc .
a base of distro with kernel modules
my usual lines configuration.
Note i tested all on real e5500 machine and all is working there.
Hope my job will help in fixing and developing
ubuntu base :
https://www.dropbox.com/s/yzp657yad3cp48n/Amigaone_Ubuntu_16.04-Base-1.img.gz?dl=0
Kernel 411:https://www.dropbox.com/s/ne49j5bo62680l0/u411.gz?dl=0
qemu line config: https://www.dropbox.com/s/j5kekeut75ogs9r/qemu_config.gz?dl=0
Thanks
Luigi