[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for R
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node |
Date: |
Thu, 24 Aug 2017 14:33:57 +0200 |
On Thu, 24 Aug 2017 09:42:28 +0800
Dou Liyang <address@hidden> wrote:
> Hi Igor,
>
> At 08/24/2017 01:47 AM, Igor Mammedov wrote:
> > On Wed, 23 Aug 2017 21:35:29 +0800
> > Dou Liyang <address@hidden> wrote:
> >
> >> Hi Igor,
> >>
> >> At 08/23/2017 08:45 PM, Igor Mammedov wrote:
> >>> On Wed, 23 Aug 2017 20:12:51 +0800
> >>> Dou Liyang <address@hidden> wrote:
> >>>
> >>>> Hi Igor,
> >>>>
> >>>> At 08/23/2017 04:40 PM, Igor Mammedov wrote:
> >>>>> On Tue, 22 Aug 2017 11:24:10 +0800
> >>>>> Dou Liyang <address@hidden> wrote:
> >>>>>
> >>>>>> As QEMU supports the memory-less node, it is possible that there is
> >>>>>> no RAM in the first numa node(also be called as node0). eg:
> >>>>>> ... \
> >>>>>> -m 128,slots=3,maxmem=1G \
> >>>>>> -numa node -numa node,mem=128M \
> >>>>>>
> >>>>>> But, this makes it hard for QEMU to build a known-to-work ACPI SRAT
> >>>>>> table. Only fixing it is not enough.
> >>>>>>
> >>>>>> Add a testcase for this situation to make sure the ACPI table is
> >>>>>> correct for guest.
> >>>>>>
> >>>>>> Suggested-by: Eduardo Habkost <address@hidden>
> >>>>>> Signed-off-by: Dou Liyang <address@hidden>
> >>>>>> ---
> >>>>>> tests/acpi-test-data/pc/DSDT.numamem | Bin 0 -> 6463 bytes
> >>>>>> tests/acpi-test-data/pc/SLIT.numamem | Bin 0 -> 48 bytes
> >>>>>> tests/acpi-test-data/pc/SRAT.numamem | Bin 0 -> 264 bytes
> >>>>>> tests/acpi-test-data/q35/DSDT.numamem | Bin 0 -> 9147 bytes
> >>>>>> tests/acpi-test-data/q35/SLIT.numamem | Bin 0 -> 48 bytes
> >>>>>> tests/acpi-test-data/q35/SRAT.numamem | Bin 0 -> 264 bytes
> >>>>>> tests/bios-tables-test.c | 30
> >>>>>> ++++++++++++++++++++++++++++++
> >>>>>> 7 files changed, 30 insertions(+)
> >>>>>> create mode 100644 tests/acpi-test-data/pc/DSDT.numamem
> >>>>>> create mode 100644 tests/acpi-test-data/pc/SLIT.numamem
> >>>>>> create mode 100644 tests/acpi-test-data/pc/SRAT.numamem
> >>>>>> create mode 100644 tests/acpi-test-data/q35/DSDT.numamem
> >>>>>> create mode 100644 tests/acpi-test-data/q35/SLIT.numamem
> >>>>>> create mode 100644 tests/acpi-test-data/q35/SRAT.numamem
> >>>>>
> >>>>>
> >>>>> considering only SRAT table has been changed and the other
> >>>>> tables match with default blobs, I'd suggest to keep only
> >>>>
> >>>>
> >>>> Our testcase is:
> >>>>
> >>>> + test_acpi_one(" -m 128,slots=3,maxmem=1G"
> >>>> + " -numa node -numa node,mem=128"
> >>>> + " -numa dist,src=0,dst=1,val=21",
> >>>> + &data);
> >>>>
> >>>> The DSDT and SLIT don't match with default blobs.
> >>> do you actually need SLIT table /i.e. -numa dist/ for test at all?
> >>> it looks not relevant for the test case at the hand,
> >>> I'd suggest to drop '-numa dist' option for the test.
> >>>
> >>
> >> OK, Got it, will drop '-numa dist' option in next version.
> >>
> >>>>
> >>>> So, they can't be dropped.
> >>>
> >>> I wonder what's changed, could you post DSDT diff here?
> >>>
> >>
> >> Just like memory hot-plug cases, when we use the '-m 128
> >> 128,slots=3,maxmem=1G' option, As the ACPI spec said, There may be some
> >> Memory Device in the DSDT table.
> > for your case '-numa node -numa node,mem=128', there is no need in enabling
> > memory hotplug.
>
> Thank you very much for your kind explanation.
>
> Yes, I understood.
>
> > If I recall it correctly the default memory for x86 is 128Mb,
> > hence removing "-m" would probably make DSDT match default one.
>
> Yes, I removed the "-m":
>
> test_acpi_one(" -numa node -numa node,mem=128", &data);
>
> but, the DSDT didn't match the default one. because, if we support
> NUMA, the DSDT will give us "_PXM" to map the CPU to node.
Ok, looks like you'll have to include your variant of DSDT along with SRAT
- [Qemu-devel] [PATCH v4 1/2] hw/acpi-build: Fix SRAT memory building when there is no memory in node0, (continued)
- [Qemu-devel] [PATCH v4 1/2] hw/acpi-build: Fix SRAT memory building when there is no memory in node0, Dou Liyang, 2017/08/21
- [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/21
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Igor Mammedov, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Igor Mammedov, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Eduardo Habkost, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Igor Mammedov, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/23
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node,
Igor Mammedov <=
- Re: [Qemu-devel] [PATCH v4 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/24
[Qemu-devel] [PATCH v5 2/2] ACPI/unit-test: Add a new testcase for RAM allocation in numa node, Dou Liyang, 2017/08/24
Re: [Qemu-devel] [PATCH v4 0/2] hw/acpi-build: Fix ACPI SRAT Memory Affinity building, Michael S. Tsirkin, 2017/08/22