Re: [Qemu-devel] [RFC PATCH 07/12] ppc4xx_i2c: Implement basic I2C functions

[David Gibson]

On Sun, Aug 13, 2017 at 07:04:38PM +0200, BALATON Zoltan wrote:
> Enough to please U-Boot and make it able to detect SDRAM SPD EEPROMs
> 
> Signed-off-by: François Revol <address@hidden>
> Signed-off-by: BALATON Zoltan <address@hidden>

I don't have the knowledge to review this deeply (or, rather, I don't
have the time to refresh myself on the 4xx manuals).  However there's
nothing obviously bogus, and what we had previously was clearly a
stub.  So I'll be happy to apply this for 2.11 if no-one with better
knowledge objects.

Reviewed-by: David Gibson <address@hidden>

> ---
>  hw/ppc/ppc4xx_i2c.c         | 214 
> +++++++++++++++++++++++++++++++++++++-------
>  include/hw/i2c/ppc4xx_i2c.h |   5 ++
>  2 files changed, 189 insertions(+), 30 deletions(-)
> 
> diff --git a/hw/ppc/ppc4xx_i2c.c b/hw/ppc/ppc4xx_i2c.c
> index fafbb34..0b088e6 100644
> --- a/hw/ppc/ppc4xx_i2c.c
> +++ b/hw/ppc/ppc4xx_i2c.c
> @@ -2,6 +2,8 @@
>   * PPC4xx I2C controller emulation
>   *
>   * Copyright (c) 2007 Jocelyn Mayer
> + * Copyright (c) 2012 François Revol
> + * Copyright (c) 2016 BALATON Zoltan
>   *
>   * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
>   * of this software and associated documentation files (the "Software"), to 
> deal
> @@ -25,25 +27,126 @@
>  #include "qemu/osdep.h"
>  #include "qapi/error.h"
>  #include "qemu-common.h"
> +#include "qemu/log.h"
>  #include "cpu.h"
>  #include "hw/hw.h"
>  #include "hw/i2c/ppc4xx_i2c.h"
>  
>  /*#define DEBUG_I2C*/
>  
> -#define PPC4xx_I2C_MEM_SIZE 0x11
> +#ifdef DEBUG_I2C
> +#define DPRINTF(fmt, args...) printf("[%s]%s: " fmt, TYPE_PPC4xx_I2C, \
> +                                     __func__, ##args);
> +#else
> +#define DPRINTF(fmt, args...)
> +#endif
> +
> +#define PPC4xx_I2C_MEM_SIZE 0x12
> +
> +#define IIC_CNTL_PT         (1 << 0)
> +#define IIC_CNTL_READ       (1 << 1)
> +#define IIC_CNTL_CHT        (1 << 2)
> +#define IIC_CNTL_RPST       (1 << 3)
> +
> +#define IIC_STS_PT          (1 << 0)
> +#define IIC_STS_ERR         (1 << 2)
> +#define IIC_STS_MDBS        (1 << 5)
> +
> +#define IIC_EXTSTS_XFRA     (1 << 0)
> +
> +#define IIC_XTCNTLSS_SRST   (1 << 0)
> +
> +static void ppc4xx_i2c_reset(DeviceState *s)
> +{
> +    PPC4xxI2CState *i2c = PPC4xx_I2C(s);
> +
> +    /* FIXME: Should also reset bus?
> +     *if (s->address != ADDR_RESET) {
> +     *    i2c_end_transfer(s->bus);
> +     *}
> +     */
> +
> +    i2c->mdata = 0;
> +    i2c->lmadr = 0;
> +    i2c->hmadr = 0;
> +    i2c->cntl = 0;
> +    i2c->mdcntl = 0;
> +    i2c->sts = 0;
> +    i2c->extsts = 0x8f;
> +    i2c->sdata = 0;
> +    i2c->lsadr = 0;
> +    i2c->hsadr = 0;
> +    i2c->clkdiv = 0;
> +    i2c->intrmsk = 0;
> +    i2c->xfrcnt = 0;
> +    i2c->xtcntlss = 0;
> +    i2c->directcntl = 0x0f;
> +    i2c->intr = 0;
> +}
> +
> +static inline bool ppc4xx_i2c_is_master(PPC4xxI2CState *i2c)
> +{
> +    return true;
> +}
>  
>  static uint8_t ppc4xx_i2c_readb(PPC4xxI2CState *i2c, hwaddr addr)
>  {
> -    uint8_t ret;
> +    int ret;
>  
> -#ifdef DEBUG_I2C
> -    printf("%s: addr " TARGET_FMT_plx "\n", __func__, addr);
> -#endif
>      switch (addr) {
>      case 0x00:
> -        /*i2c_readbyte(&i2c->mdata);*/
>          ret = i2c->mdata;
> +        if (ppc4xx_i2c_is_master(i2c)) {
> +            ret = 0xff;
> +
> +            if (!(i2c->sts & IIC_STS_MDBS)) {
> +                qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read "
> +                              "without starting transfer\n",
> +                              TYPE_PPC4xx_I2C, __func__);
> +            } else {
> +                int pending = (i2c->cntl >> 4) & 3;
> +
> +                /* get the next byte */
> +                ret = i2c_recv(i2c->bus);
> +                DPRINTF("received byte %04x\n", ret);
> +
> +                if (ret < 0) {
> +                    qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: read failed "
> +                                  "for device 0x%02x\n", TYPE_PPC4xx_I2C,
> +                                  __func__, i2c->lmadr);
> +                    ret = 0xff;
> +                } else {
> +                    /* Raise interrupt if enabled */
> +                    /*ppc4xx_i2c_raise_interrupt(i2c)*/;
> +                }
> +
> +                if (!pending) {
> +                    i2c->sts &= ~IIC_STS_MDBS;
> +                    /*i2c_end_transfer(i2c->bus);*/
> +                /*} else if (i2c->cntl & (IIC_CNTL_RPST | IIC_CNTL_CHT)) {*/
> +                } else if (pending) {
> +                    /* current smbus implementation doesn't like
> +                       multibyte xfer repeated start */
> +                    i2c_end_transfer(i2c->bus);
> +                    if (i2c_start_transfer(i2c->bus, i2c->lmadr >> 1, 1)) {
> +                        /* if non zero is returned, the adress is not valid 
> */
> +                        i2c->sts &= ~IIC_STS_PT;
> +                        i2c->sts |= IIC_STS_ERR;
> +                        i2c->extsts |= IIC_EXTSTS_XFRA;
> +                    } else {
> +                        /*i2c->sts |= IIC_STS_PT;*/
> +                        i2c->sts |= IIC_STS_MDBS;
> +                        i2c->sts &= ~IIC_STS_ERR;
> +                        i2c->extsts = 0;
> +                    }
> +                }
> +                pending--;
> +                i2c->cntl = (i2c->cntl & 0xcf) | (pending << 4);
> +            }
> +        } else {
> +            qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
> +                          TYPE_PPC4xx_I2C, __func__);
> +        }
>          break;
>      case 0x02:
>          ret = i2c->sdata;
> @@ -87,39 +190,88 @@ static uint8_t ppc4xx_i2c_readb(PPC4xxI2CState *i2c, 
> hwaddr addr)
>      case 0x10:
>          ret = i2c->directcntl;
>          break;
> +    case 0x11:
> +        ret = i2c->intr;
> +        break;
>      default:
> -        ret = 0x00;
> +        qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
> +                      HWADDR_PRIx "\n", TYPE_PPC4xx_I2C, __func__, addr);
> +        ret = 0;
>          break;
>      }
> -#ifdef DEBUG_I2C
> -    printf("%s: addr " TARGET_FMT_plx " %02" PRIx32 "\n", __func__, addr, 
> ret);
> -#endif
>  
>      return ret;
>  }
>  
>  static void ppc4xx_i2c_writeb(PPC4xxI2CState *i2c, hwaddr addr, uint8_t 
> value)
>  {
> -#ifdef DEBUG_I2C
> -    printf("%s: addr " TARGET_FMT_plx " val %08" PRIx32 "\n",
> -           __func__, addr, value);
> -#endif
>      switch (addr) {
>      case 0x00:
>          i2c->mdata = value;
> -        /*i2c_sendbyte(&i2c->mdata);*/
> +        if (!i2c_bus_busy(i2c->bus)) {
> +            /* assume we start a write transfer */
> +            if (i2c_start_transfer(i2c->bus, i2c->lmadr >> 1, 0)) {
> +                /* if non zero is returned, the adress is not valid */
> +                i2c->sts &= ~IIC_STS_PT;
> +                i2c->sts |= IIC_STS_ERR;
> +                i2c->extsts |= IIC_EXTSTS_XFRA;
> +            } else {
> +                i2c->sts |= IIC_STS_PT;
> +                i2c->sts &= ~IIC_STS_ERR;
> +                i2c->extsts = 0;
> +            }
> +        }
> +        if (i2c_bus_busy(i2c->bus)) {
> +            DPRINTF("sending byte %02x\n", i2c->mdata);
> +            if (i2c_send(i2c->bus, i2c->mdata)) {
> +                /* if the target return non zero then end the transfer */
> +                i2c->sts &= ~IIC_STS_PT;
> +                i2c->sts |= IIC_STS_ERR;
> +                i2c->extsts |= IIC_EXTSTS_XFRA;
> +                i2c_end_transfer(i2c->bus);
> +            }
> +        }
>          break;
>      case 0x02:
>          i2c->sdata = value;
>          break;
>      case 0x04:
>          i2c->lmadr = value;
> +        if (i2c_bus_busy(i2c->bus)) {
> +            i2c_end_transfer(i2c->bus);
> +        }
> +        DPRINTF("%s: device addr %02x\n", __func__, i2c->lmadr);
>          break;
>      case 0x05:
>          i2c->hmadr = value;
>          break;
>      case 0x06:
>          i2c->cntl = value;
> +        if (i2c->cntl & IIC_CNTL_PT) {
> +            if (i2c->cntl & IIC_CNTL_READ) {
> +                DPRINTF("read xfer %d\n", ((i2c->cntl >> 4) & 3) + 1);
> +                if (i2c_bus_busy(i2c->bus)) {
> +                    /* end previous transfer */
> +                    i2c->sts &= ~IIC_STS_PT;
> +                    i2c_end_transfer(i2c->bus);
> +                }
> +                if (i2c_start_transfer(i2c->bus, i2c->lmadr >> 1, 1)) {
> +                    /* if non zero is returned, the adress is not valid */
> +                    i2c->sts &= ~IIC_STS_PT;
> +                    i2c->sts |= IIC_STS_ERR;
> +                    i2c->extsts |= IIC_EXTSTS_XFRA;
> +                } else {
> +                    /*i2c->sts |= IIC_STS_PT;*/
> +                    i2c->sts |= IIC_STS_MDBS;
> +                    i2c->sts &= ~IIC_STS_ERR;
> +                    i2c->extsts = 0;
> +                }
> +            } else {
> +                DPRINTF("write xfer %d\n", ((i2c->cntl >> 4) & 3) + 1);
> +                /* we actually already did the write transfer... */
> +                i2c->sts &= ~IIC_STS_PT;
> +            }
> +        }
>          break;
>      case 0x07:
>          i2c->mdcntl = value & 0xDF;
> @@ -132,6 +284,7 @@ static void ppc4xx_i2c_writeb(PPC4xxI2CState *i2c, hwaddr 
> addr, uint8_t value)
>          break;
>      case 0x0A:
>          i2c->lsadr = value;
> +        /*i2c_set_slave_address(i2c->bus, i2c->lsadr);*/
>          break;
>      case 0x0B:
>          i2c->hsadr = value;
> @@ -146,11 +299,23 @@ static void ppc4xx_i2c_writeb(PPC4xxI2CState *i2c, 
> hwaddr addr, uint8_t value)
>          i2c->xfrcnt = value & 0x77;
>          break;
>      case 0x0F:
> +        if (value & IIC_XTCNTLSS_SRST) {
> +            /* Is it actually a full reset? U-Boot sets some regs before */
> +            ppc4xx_i2c_reset(DEVICE(i2c));
> +            break;
> +        }
>          i2c->xtcntlss = value;
>          break;
>      case 0x10:
>          i2c->directcntl = value & 0x7;
>          break;
> +    case 0x11:
> +        i2c->intr = value;
> +        break;
> +    default:
> +        qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
> +                      HWADDR_PRIx "\n", TYPE_PPC4xx_I2C, __func__, addr);
> +        break;
>      }
>  }
>  
> @@ -160,10 +325,12 @@ static uint64_t ppc4xx_i2c_read(void *opaque, hwaddr 
> addr, unsigned int size)
>      int i;
>      uint64_t ret = 0;
>  
> +    DPRINTF("read I2C " TARGET_FMT_plx " size %u\n", addr, size);
>      for (i = 0; i < size; i++) {
>          ret <<= 8;
>          ret |= ppc4xx_i2c_readb(s, addr + i);
>      }
> +    DPRINTF("read I2C " TARGET_FMT_plx " %02" PRIx64 "\n", addr, ret);
>  
>      return ret;
>  }
> @@ -174,6 +341,8 @@ static void ppc4xx_i2c_write(void *opaque, hwaddr addr, 
> uint64_t value,
>      PPC4xxI2CState *s = PPC4xx_I2C(opaque);
>      int i;
>  
> +    DPRINTF("write I2C " TARGET_FMT_plx " size %u val %08" PRIx64 "\n",
> +            addr, size, value);
>      for (i = 0; i < size; i++) {
>          ppc4xx_i2c_writeb(s, addr + i, value & 0xff);
>          value >>= 8;
> @@ -188,21 +357,6 @@ static const MemoryRegionOps ppc4xx_i2c_ops = {
>      .endianness = DEVICE_NATIVE_ENDIAN,
>  };
>  
> -static void ppc4xx_i2c_reset(DeviceState *s)
> -{
> -    PPC4xxI2CState *i2c = PPC4xx_I2C(s);
> -
> -    i2c->mdata = 0x00;
> -    i2c->sdata = 0x00;
> -    i2c->cntl = 0x00;
> -    i2c->mdcntl = 0x00;
> -    i2c->sts = 0x00;
> -    i2c->extsts = 0x00;
> -    i2c->clkdiv = 0x00;
> -    i2c->xfrcnt = 0x00;
> -    i2c->directcntl = 0x0F;
> -}
> -
>  static void ppc4xx_i2c_init(Object *o)
>  {
>      PPC4xxI2CState *s = PPC4xx_I2C(o);
> diff --git a/include/hw/i2c/ppc4xx_i2c.h b/include/hw/i2c/ppc4xx_i2c.h
> index 7f1e6be..71fb392 100644
> --- a/include/hw/i2c/ppc4xx_i2c.h
> +++ b/include/hw/i2c/ppc4xx_i2c.h
> @@ -2,6 +2,8 @@
>   * PPC4xx I2C controller emulation
>   *
>   * Copyright (c) 2007 Jocelyn Mayer
> + * Copyright (c) 2012 François Revol
> + * Copyright (c) 2016 BALATON Zoltan
>   *
>   * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
>   * of this software and associated documentation files (the "Software"), to 
> deal
> @@ -28,6 +30,7 @@
>  #include "qemu/osdep.h"
>  #include "qemu-common.h"
>  #include "hw/sysbus.h"
> +#include "hw/i2c/i2c.h"
>  
>  #define TYPE_PPC4xx_I2C "ppc4xx-i2c"
>  #define PPC4xx_I2C(obj) OBJECT_CHECK(PPC4xxI2CState, (obj), TYPE_PPC4xx_I2C)
> @@ -37,6 +40,7 @@ typedef struct PPC4xxI2CState {
>      SysBusDevice parent_obj;
>  
>      /*< public >*/
> +    I2CBus *bus;
>      qemu_irq irq;
>      MemoryRegion iomem;
>      uint8_t mdata;
> @@ -54,6 +58,7 @@ typedef struct PPC4xxI2CState {
>      uint8_t xfrcnt;
>      uint8_t xtcntlss;
>      uint8_t directcntl;
> +    uint8_t intr;
>  } PPC4xxI2CState;
>  
>  #endif /* PPC4XX_I2C_H */

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature