Re: [Qemu-devel] [PATCH v3 2/6] seccomp: add obsolete argument to command line

[Eduardo Otubo]

On Wed, Aug 02, 2017 at 01:33:56PM +0100, Daniel P. Berrange wrote:
> On Fri, Jul 28, 2017 at 02:10:36PM +0200, Eduardo Otubo wrote:
> > This patch introduces the argument [,obsolete=allow] to the `-sandbox on'
> > option. It allows Qemu to run safely on old system that still relies on
> > old system calls.
> > 
> > Signed-off-by: Eduardo Otubo <address@hidden>
> > ---
> >  include/sysemu/seccomp.h |  4 +++-
> >  qemu-options.hx          |  9 +++++++--
> >  qemu-seccomp.c           | 32 +++++++++++++++++++++++++++++++-
> >  vl.c                     | 16 +++++++++++++++-
> >  4 files changed, 56 insertions(+), 5 deletions(-)
> > 
> > diff --git a/include/sysemu/seccomp.h b/include/sysemu/seccomp.h
> > index cfc06008cb..7a7bde246b 100644
> > --- a/include/sysemu/seccomp.h
> > +++ b/include/sysemu/seccomp.h
> > @@ -15,7 +15,9 @@
> >  #ifndef QEMU_SECCOMP_H
> >  #define QEMU_SECCOMP_H
> >  
> > +#define OBSOLETE    0x0001
> 
> Please namespace this - its far too generic a term to expose to other
> source files. I'd suggest 
> 
>   QEMU_SECCOMP_SET_OBSOLETE
> 
> > -int seccomp_start(void);
> > +int seccomp_start(uint8_t seccomp_opts);
> 
> This only allows for 8 sets. Perhaps its enough, but I'd suggest
> just using a uint32_t straight away.
> 
> > diff --git a/qemu-options.hx b/qemu-options.hx
> > index 746b5fa75d..54e492f36a 100644
> > --- a/qemu-options.hx
> > +++ b/qemu-options.hx
> > @@ -4004,13 +4004,18 @@ Old param mode (ARM only).
> >  ETEXI
> >  
> >  DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \
> > -    "-sandbox <arg>  Enable seccomp mode 2 system call filter (default 
> > 'off').\n",
> > +    "-sandbox on[,obsolete=allow]  Enable seccomp mode 2 system call 
> > filter (default 'off').\n" \
> > +    "                obsolete: Allow obsolete system calls\n",
> >      QEMU_ARCH_ALL)
> >  STEXI
> > address@hidden -sandbox @var{arg}
> > address@hidden -sandbox @var{arg}[,address@hidden
> >  @findex -sandbox
> >  Enable Seccomp mode 2 system call filter. 'on' will enable syscall 
> > filtering and 'off' will
> >  disable it.  The default is 'off'.
> > address@hidden @option
> > address@hidden address@hidden
> > +Enable Obsolete system calls
> 
> Lets explain this a bit more.
> 
> E obsolete system calls that are provided by the kernel, but typically no
> longer used by modern C library implementations. 
> 
> > address@hidden table
> >  ETEXI
> >  
> >  DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig,
> > diff --git a/qemu-seccomp.c b/qemu-seccomp.c
> > index f8877b07b5..c6a8b28260 100644
> > --- a/qemu-seccomp.c
> > +++ b/qemu-seccomp.c
> > @@ -31,6 +31,20 @@ struct QemuSeccompSyscall {
> >      uint8_t priority;
> >  };
> >  
> > +static const struct QemuSeccompSyscall obsolete[] = {
> > +    { SCMP_SYS(readdir), 255 },
> > +    { SCMP_SYS(_sysctl), 255 },
> > +    { SCMP_SYS(bdflush), 255 },
> > +    { SCMP_SYS(create_module), 255 },
> > +    { SCMP_SYS(get_kernel_syms), 255 },
> > +    { SCMP_SYS(query_module), 255 },
> > +    { SCMP_SYS(sgetmask), 255 },
> > +    { SCMP_SYS(ssetmask), 255 },
> > +    { SCMP_SYS(sysfs), 255 },
> > +    { SCMP_SYS(uselib), 255 },
> > +    { SCMP_SYS(ustat), 255 },
> > +};
> > +
> >  static const struct QemuSeccompSyscall blacklist[] = {
> >      { SCMP_SYS(reboot), 255 },
> >      { SCMP_SYS(swapon), 255 },
> > @@ -56,7 +70,20 @@ static const struct QemuSeccompSyscall blacklist[] = {
> >      { SCMP_SYS(vserver), 255 },
> >  };
> >  
> > -int seccomp_start(void)
> > +static int is_obsolete(int syscall)
> > +{
> > +    unsigned int i = 0;
> > +
> > +    for (i = 0; i < ARRAY_SIZE(obsolete); i++) {
> > +        if (syscall == obsolete[i].num) {
> > +            return 1;
> > +        }
> > +    }
> > +
> > +    return 0;
> > +}
> > +
> > +int seccomp_start(uint8_t seccomp_opts)
> >  {
> >      int rc = 0;
> >      unsigned int i = 0;
> > @@ -69,6 +96,9 @@ int seccomp_start(void)
> >      }
> >  
> >      for (i = 0; i < ARRAY_SIZE(blacklist); i++) {
> > +        if ((seccomp_opts & OBSOLETE) && is_obsolete(blacklist[i].num)) {
> > +            continue;
> > +        }
> 
> IMHO this is leading to a rather inefficient approach. Why not extend
> QemuSeccompSyscall struct so that it has another field to list which
> set it belongs to. Then you can do
> 
> 
>   static const struct QemuSeccompSyscall blacklist[] = {
>     { SCMP_SYS(reboot), 255, QEMU_SECCOMP_SET_DEFAULT },
>     { SCMP_SYS(swapon), 255, QEMU_SECCOMP_SET_DEFAULT },
>      ....
>     { SCMP_SYS(readdir), 255, QEMU_SECCOMP_SET_OBSOLETE },
>     { SCMP_SYS(_sysctl), 255, QEMU_SECCOMP_SET_OBSOLETE },
>     ...
> 
> And then to process this you can do
> 
>       for (i = 0; i < ARRAY_SIZE(blacklist); i++) {
>           if (blacklist[i].set != QEMU_SECCOMP_SET_OBSOLETE &&
>               blacklist[i].set & seccomp_opts) {
>             continue;

I agree with all the rest except with this one. This would require a
change on libseccomp itself. Not sure a change on the library would be
suited for now.

I'm working and reviewing all the comments today, so I'll try to post
a new version later today.

>         }
> 
> 
> >          rc = seccomp_rule_add(ctx, SCMP_ACT_KILL, blacklist[i].num, 0);
> >          if (rc < 0) {
> >              goto seccomp_return;
> > diff --git a/vl.c b/vl.c
> > index 15b98800e9..cbe09c94af 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -271,6 +271,10 @@ static QemuOptsList qemu_sandbox_opts = {
> >              .name = "enable",
> >              .type = QEMU_OPT_BOOL,
> >          },
> > +        {
> > +            .name = "obsolete",
> > +            .type = QEMU_OPT_STRING,
> > +        },
> >          { /* end of list */ }
> >      },
> >  };
> > @@ -1032,7 +1036,17 @@ static int parse_sandbox(void *opaque, QemuOpts 
> > *opts, Error **errp)
> >  {
> >      if (qemu_opt_get_bool(opts, "enable", false)) {
> >  #ifdef CONFIG_SECCOMP
> > -        if (seccomp_start() < 0) {
> > +        uint8_t seccomp_opts = 0x0000;
> > +        const char *value = NULL;
> > +
> > +        value = qemu_opt_get(opts, "obsolete");
> > +        if (value) {
> > +            if (strcmp(value, "allow") == 0) {
> > +                seccomp_opts |= OBSOLETE;
> > +            }
> > +        }
> 
> IIUC, the values will all be booleans, so we should just use
> 
>    if (qemu_opt_get_bool(opts, "obsolete", false))
>        seccomp_opts |= OBSOLETE;
> 
> > +
> > +        if (seccomp_start(seccomp_opts) < 0) {
> >              error_report("failed to install seccomp syscall filter "
> >                           "in the kernel");
> >              return -1;
> 
> Regards,
> Daniel
> -- 
> |: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
> |: https://libvirt.org         -o-            https://fstop138.berrange.com :|
> |: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

-- 
Eduardo Otubo
Senior Software Engineer @ RedHat