[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 4/4] xen: don't use xenstore to save/restore
From: |
Stefano Stabellini |
Subject: |
Re: [Qemu-devel] [PATCH v2 4/4] xen: don't use xenstore to save/restore physmap anymore |
Date: |
Wed, 5 Jul 2017 15:38:43 -0700 (PDT) |
User-agent: |
Alpine 2.10 (DEB 1266 2009-07-14) |
On Tue, 4 Jul 2017, Igor Druzhinin wrote:
> If we have a system with xenforeignmemory_map2() implemented
> we don't need to save/restore physmap on suspend/restore
> anymore. In case we resume a VM without physmap - try to
> recreate the physmap during memory region restore phase and
> remap map cache entries accordingly. The old code is left
> for compatibility reasons.
>
> Signed-off-by: Igor Druzhinin <address@hidden>
> ---
> hw/i386/xen/xen-hvm.c | 48
> ++++++++++++++++++++++++++++++++++-----------
> include/hw/xen/xen_common.h | 1 +
> 2 files changed, 38 insertions(+), 11 deletions(-)
>
> diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c
> index d259cf7..d24ca47 100644
> --- a/hw/i386/xen/xen-hvm.c
> +++ b/hw/i386/xen/xen-hvm.c
> @@ -289,6 +289,7 @@ static XenPhysmap *get_physmapping(XenIOState *state,
> return NULL;
> }
>
> +#ifdef XEN_COMPAT_PHYSMAP
> static hwaddr xen_phys_offset_to_gaddr(hwaddr start_addr,
> ram_addr_t size, void
> *opaque)
> {
> @@ -334,6 +335,12 @@ static int xen_save_physmap(XenIOState *state,
> XenPhysmap *physmap)
> }
> return 0;
> }
> +#else
> +static int xen_save_physmap(XenIOState *state, XenPhysmap *physmap)
> +{
> + return 0;
> +}
> +#endif
>
> static int xen_add_to_physmap(XenIOState *state,
> hwaddr start_addr,
> @@ -368,6 +375,26 @@ go_physmap:
> DPRINTF("mapping vram to %"HWADDR_PRIx" - %"HWADDR_PRIx"\n",
> start_addr, start_addr + size);
>
> + mr_name = memory_region_name(mr);
> +
> + physmap = g_malloc(sizeof (XenPhysmap));
> +
> + physmap->start_addr = start_addr;
> + physmap->size = size;
> + physmap->name = mr_name;
> + physmap->phys_offset = phys_offset;
> +
> + QLIST_INSERT_HEAD(&state->physmap, physmap, list);
> +
> + if (runstate_check(RUN_STATE_INMIGRATE)) {
> + /* Now when we have a physmap entry we can replace a dummy mapping
> with
> + * a real one of guest foreign memory. */
> + uint8_t *p = xen_replace_cache_entry(phys_offset, start_addr, size);
> + assert(p && p == memory_region_get_ram_ptr(mr));
> +
> + return 0;
> + }
> +
> pfn = phys_offset >> TARGET_PAGE_BITS;
> start_gpfn = start_addr >> TARGET_PAGE_BITS;
> for (i = 0; i < size >> TARGET_PAGE_BITS; i++) {
> @@ -382,17 +409,6 @@ go_physmap:
> }
> }
>
> - mr_name = memory_region_name(mr);
> -
> - physmap = g_malloc(sizeof (XenPhysmap));
> -
> - physmap->start_addr = start_addr;
> - physmap->size = size;
> - physmap->name = mr_name;
> - physmap->phys_offset = phys_offset;
> -
> - QLIST_INSERT_HEAD(&state->physmap, physmap, list);
> -
> xc_domain_pin_memory_cacheattr(xen_xc, xen_domid,
> start_addr >> TARGET_PAGE_BITS,
> (start_addr + size - 1) >>
> TARGET_PAGE_BITS,
> @@ -1158,6 +1174,7 @@ static void xen_exit_notifier(Notifier *n, void *data)
> xs_daemon_close(state->xenstore);
> }
>
> +#ifdef XEN_COMPAT_PHYSMAP
> static void xen_read_physmap(XenIOState *state)
> {
> XenPhysmap *physmap = NULL;
> @@ -1205,6 +1222,11 @@ static void xen_read_physmap(XenIOState *state)
> }
> free(entries);
> }
> +#else
> +static void xen_read_physmap(XenIOState *state)
> +{
> +}
> +#endif
>
> static void xen_wakeup_notifier(Notifier *notifier, void *data)
> {
> @@ -1331,7 +1353,11 @@ void xen_hvm_init(PCMachineState *pcms, MemoryRegion
> **ram_memory)
> state->bufioreq_local_port = rc;
>
> /* Init RAM management */
> +#ifdef XEN_COMPAT_PHYSMAP
> xen_map_cache_init(xen_phys_offset_to_gaddr, state);
> +#else
> + xen_map_cache_init(NULL, state);
> +#endif
This is good. I would also like to #ifdef the
if (!translated && mapcache->phys_offset_to_gaddr) {
block in xen_map_cache_unlocked
> xen_ram_init(pcms, ram_size, ram_memory);
>
> qemu_add_vm_change_state_handler(xen_hvm_change_state_handler, state);
> diff --git a/include/hw/xen/xen_common.h b/include/hw/xen/xen_common.h
> index 70a5cad..c04c5c9 100644
> --- a/include/hw/xen/xen_common.h
> +++ b/include/hw/xen/xen_common.h
> @@ -80,6 +80,7 @@ extern xenforeignmemory_handle *xen_fmem;
>
> #if CONFIG_XEN_CTRL_INTERFACE_VERSION < 41000
>
> +#define XEN_COMPAT_PHYSMAP
> #define xenforeignmemory_map2(h, d, a, p, f, ps, ar, e) \
> xenforeignmemory_map(h, d, p, ps, ar, e)
>
> --
> 2.7.4
>
- [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), (continued)
- [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Igor Druzhinin, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Paul Durrant, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Igor Druzhinin, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Paul Durrant, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Igor Druzhinin, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Paul Durrant, 2017/07/05
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Stefano Stabellini, 2017/07/05
- Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Paul Durrant, 2017/07/06
Re: [Qemu-devel] [PATCH v2 3/4] xen/mapcache: introduce xen_replace_cache_entry(), Stefano Stabellini, 2017/07/05
[Qemu-devel] [PATCH v2 4/4] xen: don't use xenstore to save/restore physmap anymore, Igor Druzhinin, 2017/07/04
- Re: [Qemu-devel] [PATCH v2 4/4] xen: don't use xenstore to save/restore physmap anymore,
Stefano Stabellini <=
Re: [Qemu-devel] [PATCH v2 0/4] xen: don't save/restore the physmap on VM save/restore, no-reply, 2017/07/06