qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] spapr: manage hotplugged devices while the VM i


From: Igor Mammedov
Subject: Re: [Qemu-devel] [PATCH] spapr: manage hotplugged devices while the VM is not started
Date: Wed, 31 May 2017 11:06:10 +0200

On Wed, 31 May 2017 14:35:57 +1000
David Gibson <address@hidden> wrote:

> On Tue, May 30, 2017 at 06:04:45PM +0200, Laurent Vivier wrote:
> > For QEMU, a hotlugged device is a device added using the HMP/QMP
> > interface.
> > For SPAPR, a hotplugged device is a device added while the
> > machine is running. In this case QEMU doesn't update internal
> > state but relies on the OS for this part
> > 
> > In the case of migration, when we (libvirt) hotplug a device
> > on the source guest, we (libvirt) generally hotplug the same
> > device on the destination guest. But in this case, the machine
> > is stopped (RUN_STATE_INMIGRATE) and QEMU must not expect
> > the OS will manage it as an hotplugged device as it will
> > be "imported" by the migration.
> > 
> > This patch changes the meaning of "hotplugged" in spapr.c
> > to manage a QEMU hotplugged device like a "coldplugged" one
> > when the machine is awaiting an incoming migration.
> > 
> > Signed-off-by: Laurent Vivier <address@hidden>  
> 
> So, I think this is a reasonable concept, at least in terms of
> cleanliness and not doing unnecessary work.  However, if it's fixing
> bugs, I suspect that means we still have problems elsewhere.
> 
> Specifically, what is it we're doing before the incoming migration
> that's breaking things.  Even if it's unnecessary, anything done there
> should be overwritten by the incoming stream.  That should certainly
> be the case (now) for the DRC state variables.  Maybe not for the
> queued hotplug events - but that means we should update the queue
> migration to make sure we clear anything existing on the destination
> before adding migrated events.
As David pointed out state of devices on target side should be overwritten
by migration stream and migration hooks should fix up any side-effects
that devices 'coldplugged' on target side had before migration stream.

So patch looks like band aid, I'd hold off applying it and redefining
hotplugged meaning at least until it's clearly understood what's going
wrong during migration and if it could be fixed using generic approach
before resorting to this patch.


> I'm also concerned by the fact that this makes changes for memory and
> cpu hotplug, but not for PCI devices.  Why aren't they also affected
> by this problem?
> 
> One nit in the implementation, see below:
> 
> > ---
> >  hw/ppc/spapr.c | 20 ++++++++++++++------
> >  1 file changed, 14 insertions(+), 6 deletions(-)
> > 
> > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> > index 0980d73..f1302d0 100644
> > --- a/hw/ppc/spapr.c
> > +++ b/hw/ppc/spapr.c
> > @@ -2511,6 +2511,12 @@ static void spapr_nmi(NMIState *n, int cpu_index, 
> > Error **errp)
> >      }
> >  }
> >  
> > +static bool spapr_coldplugged(DeviceState *dev)
> > +{
> > +    return runstate_check(RUN_STATE_INMIGRATE) ||
> > +           !dev->hotplugged;
> > +}
> > +
> >  static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t 
> > size,
> >                             uint32_t node, bool dedicated_hp_event_source,
> >                             Error **errp)
> > @@ -2521,6 +2527,7 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t 
> > addr_start, uint64_t size,
> >      int i, fdt_offset, fdt_size;
> >      void *fdt;
> >      uint64_t addr = addr_start;
> > +    bool coldplugged = spapr_coldplugged(dev);
> >  
> >      for (i = 0; i < nr_lmbs; i++) {
> >          drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
> > @@ -2532,9 +2539,9 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t 
> > addr_start, uint64_t size,
> >                                                  SPAPR_MEMORY_BLOCK_SIZE);
> >  
> >          drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > -        drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp);
> > +        drck->attach(drc, dev, fdt, fdt_offset, coldplugged, errp);
> >          addr += SPAPR_MEMORY_BLOCK_SIZE;
> > -        if (!dev->hotplugged) {
> > +        if (coldplugged) {
> >              /* guests expect coldplugged LMBs to be pre-allocated */
> >              drck->set_allocation_state(drc, 
> > SPAPR_DR_ALLOCATION_STATE_USABLE);
> >              drck->set_isolation_state(drc, 
> > SPAPR_DR_ISOLATION_STATE_UNISOLATED);
> > @@ -2543,7 +2550,7 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t 
> > addr_start, uint64_t size,
> >      /* send hotplug notification to the
> >       * guest only in case of hotplugged memory
> >       */
> > -    if (dev->hotplugged) {
> > +    if (!coldplugged) {
> >          if (dedicated_hp_event_source) {
> >              drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
> >                      addr_start / SPAPR_MEMORY_BLOCK_SIZE);
> > @@ -2776,6 +2783,7 @@ static void spapr_core_plug(HotplugHandler 
> > *hotplug_dev, DeviceState *dev,
> >      int smt = kvmppc_smt_threads();
> >      CPUArchId *core_slot;
> >      int index;
> > +    bool coldplugged = spapr_coldplugged(dev);
> >  
> >      core_slot = spapr_find_cpu_slot(MACHINE(hotplug_dev), cc->core_id, 
> > &index);
> >      if (!core_slot) {
> > @@ -2797,7 +2805,7 @@ static void spapr_core_plug(HotplugHandler 
> > *hotplug_dev, DeviceState *dev,
> >  
> >      if (drc) {
> >          sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > -        drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, 
> > &local_err);
> > +        drck->attach(drc, dev, fdt, fdt_offset, coldplugged, &local_err);
> >          if (local_err) {
> >              g_free(fdt);
> >              error_propagate(errp, local_err);
> > @@ -2805,7 +2813,7 @@ static void spapr_core_plug(HotplugHandler 
> > *hotplug_dev, DeviceState *dev,
> >          }
> >      }
> >  
> > -    if (dev->hotplugged) {
> > +    if (!coldplugged) {
> >          /*
> >           * Send hotplug notification interrupt to the guest only in case
> >           * of hotplugged CPUs.
> > @@ -2838,7 +2846,7 @@ static void spapr_core_pre_plug(HotplugHandler 
> > *hotplug_dev, DeviceState *dev,
> >      int node_id;
> >      int index;
> >  
> > -    if (dev->hotplugged && !mc->has_hotpluggable_cpus) {
> > +    if (!spapr_coldplugged(dev) && !mc->has_hotpluggable_cpus) {  
> 
> It probably doesn't matter in practice, but in this specific instance,
> I think you want the "raw" qemu meaning of hotplugged rather than the
> spapr meaning.
> 
> >          error_setg(&local_err, "CPU hotplug not supported for this 
> > machine");
> >          goto out;
> >      }  
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]