[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 08/13] armv7m: Improve "-d mmu" tracing for PMSA
From: |
Alistair Francis |
Subject: |
Re: [Qemu-devel] [PATCH 08/13] armv7m: Improve "-d mmu" tracing for PMSAv7 MPU |
Date: |
Wed, 3 May 2017 14:30:46 -0700 |
On Tue, Apr 25, 2017 at 5:07 AM, Peter Maydell <address@hidden> wrote:
> From: Michael Davidsaver <address@hidden>
>
> Improve the "-d mmu" tracing for the PMSAv7 MPU translation
> process as an aid in debugging guest MPU configurations:
> * fix a missing newline for a guest-error log
> * report the region number with guest-error or unimp
> logs of bad region register values
> * add a log message for the overall result of the lookup
> * print "0x" prefix for hex values
>
> Signed-off-by: Michael Davidsaver <address@hidden>
> [PMM: a little tidyup, report region number in all messages
> rather than just one]
> Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
Thanks,
Alistair
> ---
> target/arm/helper.c | 39 +++++++++++++++++++++++++++------------
> 1 file changed, 27 insertions(+), 12 deletions(-)
>
> diff --git a/target/arm/helper.c b/target/arm/helper.c
> index 5c044d0..9e1ed1c 100644
> --- a/target/arm/helper.c
> +++ b/target/arm/helper.c
> @@ -8169,16 +8169,18 @@ static bool get_phys_addr_pmsav7(CPUARMState *env,
> uint32_t address,
> }
>
> if (!rsize) {
> - qemu_log_mask(LOG_GUEST_ERROR, "DRSR.Rsize field can not be
> 0");
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "DRSR[%d]: Rsize field cannot be 0\n", n);
> continue;
> }
> rsize++;
> rmask = (1ull << rsize) - 1;
>
> if (base & rmask) {
> - qemu_log_mask(LOG_GUEST_ERROR, "DRBAR %" PRIx32 " misaligned
> "
> - "to DRSR region size, mask = %" PRIx32,
> - base, rmask);
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "DRBAR[%d]: 0x%" PRIx32 " misaligned "
> + "to DRSR region size, mask = 0x%" PRIx32 "\n",
> + n, base, rmask);
> continue;
> }
>
> @@ -8215,9 +8217,10 @@ static bool get_phys_addr_pmsav7(CPUARMState *env,
> uint32_t address,
> }
> }
> if (rsize < TARGET_PAGE_BITS) {
> - qemu_log_mask(LOG_UNIMP, "No support for MPU (sub)region"
> + qemu_log_mask(LOG_UNIMP,
> + "DRSR[%d]: No support for MPU (sub)region "
> "alignment of %" PRIu32 " bits. Minimum is
> %d\n",
> - rsize, TARGET_PAGE_BITS);
> + n, rsize, TARGET_PAGE_BITS);
> continue;
> }
> if (srdis) {
> @@ -8251,8 +8254,8 @@ static bool get_phys_addr_pmsav7(CPUARMState *env,
> uint32_t address,
> break;
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> - "Bad value for AP bits in DRACR %"
> - PRIx32 "\n", ap);
> + "DRACR[%d]: Bad value for AP bits: 0x%"
> + PRIx32 "\n", n, ap);
> }
> } else { /* Priv. mode AP bits decoding */
> switch (ap) {
> @@ -8269,8 +8272,8 @@ static bool get_phys_addr_pmsav7(CPUARMState *env,
> uint32_t address,
> break;
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> - "Bad value for AP bits in DRACR %"
> - PRIx32 "\n", ap);
> + "DRACR[%d]: Bad value for AP bits: 0x%"
> + PRIx32 "\n", n, ap);
> }
> }
>
> @@ -8448,9 +8451,21 @@ static bool get_phys_addr(CPUARMState *env,
> target_ulong address,
> */
> if (arm_feature(env, ARM_FEATURE_PMSA) &&
> arm_feature(env, ARM_FEATURE_V7)) {
> + bool ret;
> *page_size = TARGET_PAGE_SIZE;
> - return get_phys_addr_pmsav7(env, address, access_type, mmu_idx,
> - phys_ptr, prot, fsr);
> + ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx,
> + phys_ptr, prot, fsr);
> + qemu_log_mask(CPU_LOG_MMU, "PMSAv7 MPU lookup for %s at 0x%08" PRIx32
> + " mmu_idx %u -> %s (prot %c%c%c)\n",
> + access_type == 1 ? "reading" :
> + (access_type == 2 ? "writing" : "execute"),
> + (uint32_t)address, mmu_idx,
> + ret ? "Miss" : "Hit",
> + *prot & PAGE_READ ? 'r' : '-',
> + *prot & PAGE_WRITE ? 'w' : '-',
> + *prot & PAGE_EXEC ? 'x' : '-');
> +
> + return ret;
> }
>
> if (regime_translation_disabled(env, mmu_idx)) {
> --
> 2.7.4
>
>
- Re: [Qemu-devel] [PATCH 08/13] armv7m: Improve "-d mmu" tracing for PMSAv7 MPU,
Alistair Francis <=