[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 6/6] migration: Pass Error ** argument to {save,
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH 6/6] migration: Pass Error ** argument to {save, load}_vmstate |
Date: |
Fri, 28 Apr 2017 15:47:30 +0100 |
User-agent: |
Mutt/1.8.0 (2017-02-23) |
* Juan Quintela (address@hidden) wrote:
> This way we use the "normal" way of printing errors for hmp commands.
>
> --
> Paolo suggestion
>
> Signed-off-by: Juan Quintela <address@hidden>
<snip>
> +int save_vmstate(const char *name, Error **errp)
> {
> BlockDriverState *bs, *bs1;
> QEMUSnapshotInfo sn1, *sn = &sn1, old_sn1, *old_sn = &old_sn1;
> @@ -2076,29 +2076,27 @@ int save_vmstate(const char *name)
> uint64_t vm_state_size;
> qemu_timeval tv;
> struct tm tm;
> - Error *local_err = NULL;
> AioContext *aio_context;
>
> if (!bdrv_all_can_snapshot(&bs)) {
> - error_report("Device '%s' is writable but does not support
> snapshots",
> - bdrv_get_device_name(bs));
> + error_setg(errp, "Device '%s' is writable but does not support "
> + "snapshots", bdrv_get_device_name(bs));
> return ret;
> }
>
> /* Delete old snapshots of the same name */
> if (name) {
> - ret = bdrv_all_delete_snapshot(name, &bs1, &local_err);
> + ret = bdrv_all_delete_snapshot(name, &bs1, errp);
> if (ret < 0) {
> - error_reportf_err(local_err,
> - "Error while deleting snapshot on device '%s':
> ",
> - bdrv_get_device_name(bs1));
> + error_prepend(errp, "Error while deleting snapshot on device "
> + "'%s': ", bdrv_get_device_name(bs1));
I thought the rule was that you had to use a local_err and use error_propagate?
(I hate that rule)
> return ret;
> }
> }
>
> bs = bdrv_all_find_vmstate_bs();
> if (bs == NULL) {
> - error_report("No block device can accept snapshots");
> + error_setg(errp, "No block device can accept snapshots");
> return ret;
> }
> aio_context = bdrv_get_aio_context(bs);
> @@ -2107,7 +2105,7 @@ int save_vmstate(const char *name)
>
> ret = global_state_store();
> if (ret) {
> - error_report("Error saving global state");
> + error_setg(errp, "Error saving global state");
> return ret;
> }
> vm_stop(RUN_STATE_SAVE_VM);
> @@ -2139,21 +2137,20 @@ int save_vmstate(const char *name)
> /* save the VM state */
> f = qemu_fopen_bdrv(bs, 1);
> if (!f) {
> - error_report("Could not open VM state file");
> + error_setg(errp, "Could not open VM state file");
> goto the_end;
> }
> - ret = qemu_savevm_state(f, &local_err);
> + ret = qemu_savevm_state(f, errp);
> vm_state_size = qemu_ftell(f);
> qemu_fclose(f);
> if (ret < 0) {
> - error_report_err(local_err);
> goto the_end;
> }
>
> ret = bdrv_all_create_snapshot(sn, bs, vm_state_size, &bs);
> if (ret < 0) {
> - error_report("Error while creating snapshot on '%s'",
> - bdrv_get_device_name(bs));
> + error_setg(errp, "Error while creating snapshot on '%s'",
> + bdrv_get_device_name(bs));
> goto the_end;
> }
>
> @@ -2226,7 +2223,7 @@ void qmp_xen_load_devices_state(const char *filename,
> Error **errp)
> migration_incoming_state_destroy();
> }
>
> -int load_vmstate(const char *name)
> +int load_vmstate(const char *name, Error **errp)
> {
> BlockDriverState *bs, *bs_vm_state;
> QEMUSnapshotInfo sn;
> @@ -2236,20 +2233,22 @@ int load_vmstate(const char *name)
> MigrationIncomingState *mis = migration_incoming_get_current();
>
> if (!bdrv_all_can_snapshot(&bs)) {
> - error_report("Device '%s' is writable but does not support
> snapshots",
> - bdrv_get_device_name(bs));
> + error_setg(errp,
> + "Device '%s' is writable but does not support snapshots",
> + bdrv_get_device_name(bs));
> return -ENOTSUP;
> }
> ret = bdrv_all_find_snapshot(name, &bs);
> if (ret < 0) {
> - error_report("Device '%s' does not have the requested snapshot '%s'",
> - bdrv_get_device_name(bs), name);
> + error_setg(errp,
> + "Device '%s' does not have the requested snapshot '%s'",
> + bdrv_get_device_name(bs), name);
> return ret;
> }
>
> bs_vm_state = bdrv_all_find_vmstate_bs();
> if (!bs_vm_state) {
> - error_report("No block device supports snapshots");
> + error_setg(errp, "No block device supports snapshots");
> return -ENOTSUP;
> }
> aio_context = bdrv_get_aio_context(bs_vm_state);
> @@ -2261,8 +2260,8 @@ int load_vmstate(const char *name)
> if (ret < 0) {
> return ret;
> } else if (sn.vm_state_size == 0) {
> - error_report("This is a disk-only snapshot. Revert to it offline "
> - "using qemu-img.");
> + error_setg(errp, "This is a disk-only snapshot. Revert to it "
> + " offline using qemu-img");
> return -EINVAL;
> }
>
> @@ -2271,7 +2270,7 @@ int load_vmstate(const char *name)
>
> ret = bdrv_all_goto_snapshot(name, &bs);
> if (ret < 0) {
> - error_report("Error %d while activating snapshot '%s' on '%s'",
> + error_setg(errp, "Error %d while activating snapshot '%s' on '%s'",
> ret, name, bdrv_get_device_name(bs));
> return ret;
> }
> @@ -2279,7 +2278,7 @@ int load_vmstate(const char *name)
> /* restore the VM state */
> f = qemu_fopen_bdrv(bs_vm_state, 0);
> if (!f) {
> - error_report("Could not open VM state file");
> + error_setg(errp, "Could not open VM state file");
> return -EINVAL;
> }
>
> @@ -2293,7 +2292,7 @@ int load_vmstate(const char *name)
>
> migration_incoming_state_destroy();
> if (ret < 0) {
> - error_report("Error %d while loading VM state", ret);
> + error_setg(errp, "Error %d while loading VM state", ret);
> return ret;
> }
>
> diff --git a/replay/replay-snapshot.c b/replay/replay-snapshot.c
> index 8cced46..fdc4353 100644
> --- a/replay/replay-snapshot.c
> +++ b/replay/replay-snapshot.c
> @@ -62,14 +62,16 @@ void replay_vmstate_register(void)
>
> void replay_vmstate_init(void)
> {
> + Error *err = NULL;
> +
> if (replay_snapshot) {
> if (replay_mode == REPLAY_MODE_RECORD) {
> - if (save_vmstate(replay_snapshot) != 0) {
> + if (save_vmstate(replay_snapshot, &err) != 0) {
> error_report("Could not create snapshot for icount record");
> exit(1);
> }
> } else if (replay_mode == REPLAY_MODE_PLAY) {
> - if (load_vmstate(replay_snapshot) != 0) {
> + if (load_vmstate(replay_snapshot, &err) != 0) {
> error_report("Could not load snapshot for icount replay");
> exit(1);
> }
How do either of the contents of the 'err' get reported - they're not
printed at all are they?
(I don't like error_abort, I'd rather see the other message as well).
Dave
> diff --git a/vl.c b/vl.c
> index 0b4ed52..8b3ec2e 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -4681,7 +4681,9 @@ int main(int argc, char **argv, char **envp)
> if (replay_mode != REPLAY_MODE_NONE) {
> replay_vmstate_init();
> } else if (loadvm) {
> - if (load_vmstate(loadvm) < 0) {
> + Error *local_err = NULL;
> + if (load_vmstate(loadvm, &local_err) < 0) {
> + error_report_err(local_err);
> autostart = 0;
> }
> }
> --
> 2.9.3
>
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
Re: [Qemu-devel] [PATCH 0/6] Move snapshots commands to hmp, Dr. David Alan Gilbert, 2017/04/28