[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] KVM/QEMU on Raspberry Pi 3
|
From: |
Ard Biesheuvel |
|
Subject: |
Re: [Qemu-devel] KVM/QEMU on Raspberry Pi 3 |
|
Date: |
Thu, 2 Feb 2017 15:52:16 +0000 |
On 2 February 2017 at 15:50, Laszlo Ersek <address@hidden> wrote:
> Adding Ard, just in case...
>
> I have one (half-)comment re: GICv3:
>
How is this supposed to work? RPI3 does not have a GIC at all, but a
proprietary interrupt controller that is not supported by KVM
> On 02/02/17 15:44, Pekka Enberg wrote:
>> Hi,
>>
>> Has anyone been able to successfully run QEMU/KVM under Raspberry Pi 3?
>>
>> I have installed 64-bit Fedora 24 by Gerd Hoffmann on the hardware:
>>
>> https://www.kraxel.org/blog/2016/04/fedora-on-raspberry-pi-updates/
>>
>> and built a VM image using virt-builder:
>>
>> virt-builder --root-password password:root --arch aarch64 fedora-24
>>
>> I also built the latest UEFI for QEMU from sources:
>>
>> https://wiki.linaro.org/LEG/UEFIforQEMU
>>
>> and updated to QEMU 2.8.0 from rawhide:
>>
>> address@hidden ~]# qemu-system-aarch64 -version
>> QEMU emulator version 2.8.0(qemu-2.8.0-1.fc26)
>> Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
>>
>> The VM image should be fine because I’m able to boot to it under CPU
>> emulation:
>>
>> qemu-system-aarch64 \
>> -nographic \
>> -M virt \
>> -cpu cortex-a57 \
>> -smp 1 \
>> -m 512 \
>> -bios QEMU_EFI.fd \
>> -device virtio-blk-device,drive=image -drive
>> if=none,id=image,file=fedora-24.img \
>> -netdev bridge,id=hn0,br=virbr0 -device
>> virtio-net-pci,netdev=hn0,romfile= \
>> -device virtio-rng-pci
>>
>> However, when I enable KVM, keyboard stops working (interrupt delivery
>> issue?) and Fedora boot process hangs at random places before reaching
>> login:
>>
>> qemu-system-aarch64 \
>> -nographic \
>> -M virt \
>> -cpu host \
>> -enable-kvm \
>> -smp 1 \
>> -m 512 \
>> -bios QEMU_EFI.fd \
>> -device virtio-blk-device,drive=image -drive
>> if=none,id=image,file=$IMAGE \
>> -netdev bridge,id=hn0,br=virbr0 -device
>> virtio-net-pci,netdev=hn0,romfile= \
>> -device virtio-rng-pci
>>
>> EFI stub: Booting Linux Kernel...
>> ConvertPages: Incompatible memory types
>> EFI stub: Using DTB from configuration table
>> EFI stub: Exiting boot services and installing virtual address map...
>> [ 0.000000] Booting Linux on physical CPU 0x0
>> [ 0.000000] Linux version 4.9.5-100.fc24.aarch64
>> (address@hidden) (gcc version 6.3.1
>> 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Tue Jan 24 21:12:07 UTC 2017
>> [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
>> [ 0.000000] debug: ignoring loglevel setting.
>> [ 0.000000] efi: Getting EFI parameters from FDT:
>> [ 0.000000] efi: EFI v2.60 by EDK II
>> [ 0.000000] efi: SMBIOS 3.0=0x58710000 ACPI 2.0=0x589b0000
>> MEMATTR=0x59c03218
>> [ 0.000000] cma: Failed to reserve 512 MiB
>> [ 0.000000] NUMA: No NUMA configuration found
>> [ 0.000000] NUMA: Faking a node at [mem
>> 0x0000000000000000-0x000000005fffffff]
>> [ 0.000000] NUMA: Adding memblock [0x40000000 - 0x585bffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x585c0000 - 0x5861ffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x58620000 - 0x586fffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x58700000 - 0x58b6ffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x58b70000 - 0x5be3ffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x5be40000 - 0x5becffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x5bed0000 - 0x5bedffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x5bee0000 - 0x5bffffff] on node 0
>> [ 0.000000] NUMA: Adding memblock [0x5c000000 - 0x5fffffff] on node 0
>> [ 0.000000] NUMA: Initmem setup node 0 [mem 0x40000000-0x5fffffff]
>> [ 0.000000] NUMA: NODE_DATA [mem 0x5ff62680-0x5ff6ffff]
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
>> [ 0.000000] Normal empty
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000585bffff]
>> [ 0.000000] node 0: [mem 0x00000000585c0000-0x000000005861ffff]
>> [ 0.000000] node 0: [mem 0x0000000058620000-0x00000000586fffff]
>> [ 0.000000] node 0: [mem 0x0000000058700000-0x0000000058b6ffff]
>> [ 0.000000] node 0: [mem 0x0000000058b70000-0x000000005be3ffff]
>> [ 0.000000] node 0: [mem 0x000000005be40000-0x000000005becffff]
>> [ 0.000000] node 0: [mem 0x000000005bed0000-0x000000005bedffff]
>> [ 0.000000] node 0: [mem 0x000000005bee0000-0x000000005bffffff]
>> [ 0.000000] node 0: [mem 0x000000005c000000-0x000000005fffffff]
>> [ 0.000000] Initmem setup node 0 [mem
>> 0x0000000040000000-0x000000005fffffff]
>> [ 0.000000] On node 0 totalpages: 8192
>> [ 0.000000] DMA zone: 8 pages used for memmap
>> [ 0.000000] DMA zone: 0 pages reserved
>> [ 0.000000] DMA zone: 8192 pages, LIFO batch:0
>> [ 0.000000] psci: probing for conduit method from DT.
>> [ 0.000000] psci: PSCIv0.2 detected in firmware.
>> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
>> [ 0.000000] psci: Trusted OS migration not required
>> [ 0.000000] percpu: Embedded 3 pages/cpu @ffff80001ff00000 s114840
>> r8192 d73576 u196608
>> [ 0.000000] pcpu-alloc: s114840 r8192 d73576 u196608 alloc=3*65536
>> [ 0.000000] pcpu-alloc: [0] 0
>> [ 0.000000] Detected VIPT I-cache on CPU0
>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping off.
>> Total pages: 8184
>> [ 0.000000] Policy zone: DMA
>> [ 0.000000] Kernel command line:
>> BOOT_IMAGE=/vmlinuz-4.9.5-100.fc24.aarch64
>> root=UUID=d96d0229-49ed-4ef1-8866-8e7a71b378b9 ro
>> earlyprintk=pl011,0x9000000 ignore_loglevel no_timer_check printk.time=1
>> rd_NO_PLYMOUTH console=ttyAMA0 LANG=en_US.UTF-8
>> [ 0.000000] PID hash table entries: 2048 (order: -2, 16384 bytes)
>> [ 0.000000] Memory: 484864K/524288K available (8188K kernel code,
>> 1494K rwdata, 3584K rodata, 1408K init, 1853K bss, 39424K reserved, 0K
>> cma-reserved)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 (
>> 128 MB)
>> [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000
>> (126847 GB)
>> [ 0.000000] .text : 0xffff000008080000 - 0xffff000008880000 (
>> 8192 KB)
>> [ 0.000000] .rodata : 0xffff000008880000 - 0xffff000008c10000 (
>> 3648 KB)
>> [ 0.000000] .init : 0xffff000008c10000 - 0xffff000008d70000 (
>> 1408 KB)
>> [ 0.000000] .data : 0xffff000008d70000 - 0xffff000008ee5a00 (
>> 1495 KB)
>> [ 0.000000] .bss : 0xffff000008ee5a00 - 0xffff0000090b50c4 (
>> 1854 KB)
>> [ 0.000000] fixed : 0xffff7fdffe7d0000 - 0xffff7fdffec00000 (
>> 4288 KB)
>> [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 (
>> 16 MB)
>> [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 (
>> 128 GB maximum)
>> [ 0.000000] 0xffff7fe000000000 - 0xffff7fe000080000 (
>> 0 MB actual)
>> [ 0.000000] memory : 0xffff800000000000 - 0xffff800020000000 (
>> 512 MB)
>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] Build-time adjustment of leaf fanout to 64.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
>> [ 0.000000] NR_IRQS:64 nr_irqs:64 0
>> [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
>> [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ3,
>> assuming level low
>> [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
>> [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at
>> 19.20MHz (virt).
>> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
>> max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
>> [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps
>> every 4398046511078ns
>> [ 0.000151] Console: colour dummy device 80x25
>> [ 0.000343] Calibrating delay loop (skipped), value calculated using
>> timer frequency.. 38.40 BogoMIPS (lpj=19200)
>> [ 0.000358] pid_max: default: 32768 minimum: 301
>> [ 0.001206] Security Framework initialized
>> [ 0.001220] Yama: becoming mindful.
>> [ 0.001245] SELinux: Initializing.
>> [ 0.002125] SELinux: Starting in permissive mode
>> [ 0.002372] Dentry cache hash table entries: 65536 (order: 3, 524288
>> bytes)
>> [ 0.003087] Inode-cache hash table entries: 32768 (order: 2, 262144
>> bytes)
>> [ 0.003493] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes)
>> [ 0.003509] Mountpoint-cache hash table entries: 8192 (order: 0,
>> 65536 bytes)
>> [ 0.005370] ftrace: allocating 29479 entries in 8 pages
>> [ 0.099284] ASID allocator initialised with 65536 entries
>> [ 0.102201] Remapping and enabling EFI services.
>> [ 0.102381] EFI remap 0x0000000004000000 => 0000000020000000
>> [ 0.102393] EFI remap 0x0000000009010000 => 0000000024000000
>> [ 0.102403] EFI remap 0x0000000058700000 => 0000000024010000
>> [ 0.102412] EFI remap 0x0000000058770000 => 0000000024080000
>> [ 0.102421] EFI remap 0x00000000587c0000 => 00000000240d0000
>> [ 0.102430] EFI remap 0x0000000058810000 => 0000000024120000
>> [ 0.102439] EFI remap 0x0000000058860000 => 0000000024170000
>> [ 0.102448] EFI remap 0x00000000588b0000 => 00000000241c0000
>> [ 0.102457] EFI remap 0x0000000058900000 => 0000000024210000
>> [ 0.102466] EFI remap 0x0000000058950000 => 0000000024260000
>> [ 0.102475] EFI remap 0x00000000589c0000 => 00000000242b0000
>> [ 0.102483] EFI remap 0x0000000058a60000 => 0000000024350000
>> [ 0.102492] EFI remap 0x0000000058ac0000 => 00000000243b0000
>> [ 0.102501] EFI remap 0x0000000058b10000 => 0000000024400000
>> [ 0.102511] EFI remap 0x000000005be40000 => 0000000024450000
>> [ 0.102520] EFI remap 0x000000005bee0000 => 00000000244e0000
>> [ 0.102807] Brought up 1 CPUs
>> [ 0.102817] SMP: Total of 1 processors activated.
>> [ 0.102831] CPU features: detected feature: 32-bit EL0 Support
>> [ 0.102869] CPU: All CPU(s) started at EL1
>> [ 0.104821] devtmpfs: initialized
>> [ 0.108484] SMBIOS 3.0.0 present.
>> [ 0.108823] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>> [ 0.109128] atomic64_test: passed
>> [ 0.109218] pinctrl core: initialized pinctrl subsystem
>> [ 0.110804] NET: Registered protocol family 16
>> [ 0.112292] cpuidle: using governor menu
>> [ 0.112728] vdso: 2 pages (1 code @ ffff0000088a0000, 1 data @
>> ffff000008d90000)
>> [ 0.112741] hw-breakpoint: found 6 breakpoint and 4 watchpoint
>> registers.
>> [ 0.113255] DMA: preallocated 256 KiB pool for atomic allocations
>> [ 0.113829] Serial: AMBA PL011 UART driver
>> [ 0.124719] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 38,
>> base_baud = 0) is a PL011 rev1
>> [ 0.441625] console [ttyAMA0] enabled
>> [ 0.444399] irq: type mismatch, failed to map hwirq-27 for /intc!
>> [ 0.459440] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 0.462302] HugeTLB registered 512 MB page size, pre-allocated 0 pages
>> [ 0.467261] ACPI: Interpreter disabled.
>> [ 0.470087] vgaarb: loaded
>> [ 0.472026] SCSI subsystem initialized
>> [ 0.474036] libata version 3.00 loaded.
>> [ 0.476125] usbcore: registered new interface driver usbfs
>> [ 0.478641] usbcore: registered new interface driver hub
>> [ 0.481041] usbcore: registered new device driver usb
>> [ 0.483753] Registered efivars operations
>> [ 0.487178] NetLabel: Initializing
>> [ 0.488699] NetLabel: domain hash size = 128
>> [ 0.490608] NetLabel: protocols = UNLABELED CIPSOv4
>> [ 0.492812] NetLabel: unlabeled traffic allowed by default
>> [ 0.495891] clocksource: Switched to clocksource arch_sys_counter
>> [ 0.559085] VFS: Disk quotas dquot_6.6.0
>> [ 0.561229] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536
>> bytes)
>> [ 0.565523] pnp: PnP ACPI: disabled
>> [ 0.580598] NET: Registered protocol family 2
>> [ 0.583862] TCP established hash table entries: 8192 (order: 0, 65536
>> bytes)
>> [ 0.587095] TCP bind hash table entries: 8192 (order: 1, 131072 bytes)
>> [ 0.590125] TCP: Hash tables configured (established 8192 bind 8192)
>> [ 0.592954] UDP hash table entries: 2048 (order: 0, 65536 bytes)
>> [ 0.598026] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
>> [ 0.601490] NET: Registered protocol family 1
>> [ 0.603485] PCI: CLS 0 bytes, default 128
>> [ 0.605541] Unpacking initramfs...
>> [ 2.004306] Freeing initrd memory: 13504K (ffff80000f810000 -
>> ffff800010540000)
>> [ 2.008217] kvm [1]: HYP mode not available
>> [ 2.010350] alg: No test for __ecb-aes-neon (__driver-ecb-aes-neon)
>> [ 2.014394] alg: No test for __ecb-aes-neon
>> (cryptd(__driver-ecb-aes-neon))
>> [ 2.020656] futex hash table entries: 256 (order: -1, 32768 bytes)
>> [ 2.023712] audit: initializing netlink subsys (disabled)
>> [ 2.026198] audit: type=2000 audit(0.000:1): initialized
>> [ 2.029271] Initialise system trusted keyrings
>> [ 2.031861] workingset: timestamp_bits=37 max_order=13 bucket_order=0
>> [ 2.050744] zbud: loaded
>> [ 2.058467] SELinux: Registering netfilter hooks
>> [ 2.327464] alg: drbg: Test 0 failed for drbg_pr_ctr_aes128
>> [ 2.334902] alg: drbg: Test 0 failed for drbg_nopr_ctr_aes128
>> [ 2.337893] alg: drbg: Test 0 failed for drbg_nopr_ctr_aes192
>> [ 2.340850] alg: drbg: Test 0 failed for drbg_nopr_ctr_aes256
>> [ 2.347452] NET: Registered protocol family 38
>> [ 2.349471] Key type asymmetric registered
>> [ 2.351274] Asymmetric key parser 'x509' registered
>> [ 2.353543] Block layer SCSI generic (bsg) driver version 0.4 loaded
>> (major 250)
>> [ 2.357015] io scheduler noop registered
>> [ 2.358792] io scheduler deadline registered
>> [ 2.360823] io scheduler cfq registered (default)
>> [ 2.366724] pl061_gpio 9030000.pl061: PL061 GPIO chip
>> @0x0000000009030000 registered
>> [ 2.370689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 2.373129] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> [ 2.376310] OF: PCI: host bridge /address@hidden ranges:
>> [ 2.378654] OF: PCI: IO 0x3eff0000..0x3effffff -> 0x00000000
>> [ 2.381166] OF: PCI: MEM 0x10000000..0x3efeffff -> 0x10000000
>> [ 2.383718] OF: PCI: MEM 0x8000000000..0xffffffffff -> 0x8000000000
>> [ 2.386543] pci-host-generic 3f000000.pcie: ECAM at [mem
>> 0x3f000000-0x3fffffff] for [bus 00-0f]
>> [ 2.390576] pci-host-generic 3f000000.pcie: PCI host bridge to bus
>> 0000:00
>> [ 2.393517] pci_bus 0000:00: root bus resource [bus 00-0f]
>> [ 2.395889] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
>> [ 2.398550] pci_bus 0000:00: root bus resource [mem
>> 0x10000000-0x3efeffff]
>> [ 2.401452] pci_bus 0000:00: root bus resource [mem
>> 0x8000000000-0xffffffffff]
>> [ 2.404612] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
>> [ 2.408173] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
>> [ 2.417494] pci 0000:00:01.0: reg 0x10: [io 0x0020-0x003f]
>> [ 2.427875] pci 0000:00:01.0: reg 0x14: [mem 0x10000000-0x10000fff]
>> [ 2.452350] pci 0000:00:01.0: reg 0x20: [mem
>> 0x8000000000-0x8000003fff 64bit pref]
>> [ 2.467039] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
>> [ 2.476385] pci 0000:00:02.0: reg 0x10: [io 0x0000-0x001f]
>> [ 2.510013] pci 0000:00:02.0: reg 0x20: [mem
>> 0x8000004000-0x8000007fff 64bit pref]
>> [ 2.523313] pci 0000:00:01.0: BAR 4: assigned [mem
>> 0x8000000000-0x8000003fff 64bit pref]
>> [ 2.526985] pci 0000:00:02.0: BAR 4: assigned [mem
>> 0x8000004000-0x8000007fff 64bit pref]
>> [ 2.530513] pci 0000:00:01.0: BAR 1: assigned [mem
>> 0x10000000-0x10000fff]
>> [ 2.533400] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f]
>> [ 2.543649] pci 0000:00:02.0: BAR 0: assigned [io 0x1020-0x103f]
>> [ 2.557666] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>> [ 2.572033] msm_serial: driver initialized
>> [ 2.575085] Unable to detect cache hierarchy from DT for CPU 0
>> [ 2.579549] libphy: Fixed MDIO Bus: probed
>> [ 2.581978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.584794] ehci-pci: EHCI PCI platform driver
>> [ 2.586861] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 2.589494] ohci-pci: OHCI PCI platform driver
>> [ 2.591552] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 2.594749] usbcore: registered new interface driver usbserial
>> [ 2.597329] usbcore: registered new interface driver usbserial_generic
>> [ 2.600204] usbserial: USB Serial support registered for generic
>> [ 2.603205] mousedev: PS/2 mouse device common for all mice
>> [ 2.606996] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
>> [ 2.611264] device-mapper: uevent: version 1.0.3
>> [ 2.614162] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
>> initialised: address@hidden
>> [ 2.618918] EFI Variables Facility v0.08 2004-May-17
>> [ 2.623822] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 2.626625] usbcore: registered new interface driver usbhid
>> [ 2.628992] usbhid: USB HID core driver
>> [ 2.631552] drop_monitor: Initializing network drop monitor service
>> [ 2.634540] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 2.636848] Initializing XFRM netlink socket
>> [ 2.639958] NET: Registered protocol family 10
>> [ 2.643655] mip6: Mobile IPv6
>> [ 2.645096] NET: Registered protocol family 17
>> [ 2.648428] registered taskstats version 1
>> [ 2.650388] Loading compiled-in X.509 certificates
>> [ 2.653404] alg: No test for pkcs1pad(rsa,sha256)
>> (pkcs1pad(rsa-generic,sha256))
>> [ 2.662070] Loaded X.509 cert 'Fedora kernel signing key:
>> c34822b9d8433ad2ee030f319227b680e81fec51'
>> [ 2.666230] zswap: loaded using pool lzo/zbud
>> [ 2.750989] Key type big_key registered
>> [ 2.753524] Key type encrypted registered
>> [ 2.756102] rtc-efi rtc-efi: setting system clock to 2017-02-02
>> 11:08:10 UTC (1486033690)
>> [ 2.760004] PM: Hibernation image not present or could not be loaded.
>> [ 2.763332] uart-pl011 9000000.pl011: no DMA platform data
>> [ 2.767390] Freeing unused kernel memory: 1408K (ffff800000c10000 -
>> ffff800000d70000)
>> [ 2.806927] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 2.811785] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 2.828177] systemd[1]: systemd 229 running in system mode. (+PAM
>> +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
>> +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>> [ 2.836321] systemd[1]: Detected virtualization kvm.
>> [ 2.838547] systemd[1]: Detected architecture arm64.
>> [ 2.840694] systemd[1]: Running in initial RAM disk.
>>
>> Welcome to Fedora 24 (Twenty Four) dracut-044-18.git20160108.fc24
>> (Initramfs)!
>>
>> [ 2.847481] systemd[1]: Set hostname to <localhost.localdomain>.
>> [ 3.121869] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.124937] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.127974] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.131197] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.137879] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.142414] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.147556] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.151971] random: systemd: uninitialized urandom read (16 bytes read)
>> [ 3.180332] systemd[1]: Listening on Journal Audit Socket.
>> [ OK ] Listening on Journal Audit Socket.
>> [ 3.189169] systemd[1]: Created slice System Slice.
>> [ OK ] Created slice System Slice.
>> [ 3.194406] systemd[1]: Reached target Slices.
>> [ OK ] Reached target Slices.
>> [ 3.199339] systemd[1]: Listening on udev Control Socket.
>> [ OK ] Listening on udev Control Socket.
>> [ 3.204751] systemd[1]: Reached target Timers.
>> [ OK ] Reached target Timers.
>> [ OK ] Listening on Journal Socket (/dev/log).
>> [ OK ] Listening on udev Kernel Socket.
>> [ OK ] Reached target Swap.
>> [ OK ] Listening on Journal Socket.
>> Starting Journal Service...
>> Starting Create list of required st... nodes for the current
>> kernel...
>> [ OK ] Reached target Sockets.
>> Starting Apply Kernel Variables...
>> Starting Setup Virtual Console...
>> [ OK ] Reached target Local File Systems.
>> [ OK ] Started Journal Service.
>> [ 3.388992] audit: type=1130 audit(1486033690.500:2): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald
>> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
>> terminal=? res=success'
>> [ OK ] Started Create list of required sta...ce nodes for the current
>> kernel.
>> [ 3.412971] audit: type=1130 audit(1486033690.500:3): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes
>> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
>> terminal=? res=success'
>> [ OK ] Started Apply Kernel Variables.
>> [ 3.472701] audit: type=1130 audit(1486033690.500:4): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl
>> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
>> terminal=? res=success'
>> Starting Create Static Device Nodes in /dev...
>> [ OK ] Started Create Static Device Nodes in /dev.
>> [ 3.993984] audit: type=1130 audit(1486033690.500:5): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel
>> msg='unit=systemd-tmpfiles-setup-dev comm="systemd"
>> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>> Starting udev Kernel Device Manager...
>> [ OK ] Started udev Kernel Device Manager.
>> [ 4.054457] audit: type=1130 audit(1486033690.500:6): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd
>> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
>> terminal=? res=success'
>> Starting udev Coldplug all Devices...
>> [ OK ] Started udev Coldplug all Devices.
>> [ 4.423317] audit: type=1130 audit(1486033690.500:7): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel
>> msg='unit=systemd-udev-trigger comm="systemd"
>> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>> [ OK ] Reached target Remote File Systems (Pre).
>> [ OK ] Reached target Remote File Systems.
>> Mounting Configuration File System...
>> [ OK ] Mounted Configuration File System.
>> [ 4.792555] virtio-pci 0000:00:01.0: enabling device (0005 -> 0007)
>> [ OK ] Started Setup Virtual Console.
>> [ 4.839330] audit: type=1130 audit(1486033690.500:8): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel
>> msg='unit=systemd-vconsole-setup comm="systemd"
>> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>> [ OK ] Reached target System Initialization.
>> Starting Show Plymouth Boot Screen...
>> [ 5.207240] virtio-pci 0000:00:02.0: enabling device (0005 -> 0007)
>> [ 5.290059] input: gpio-keys as /devices/platform/gpio-keys/input/input0
>> [ 5.709339] random: fast init done
>> [ 5.711632] random: crng init done
>> [ 5.758189] vda: vda1 vda2 vda3 vda4 < vda5 >
>> [ OK ] Found device
>> /dev/disk/by-uuid/d96d0229-49ed-4ef1-8866-8e7a71b378b9.
>> Starting File System Check on
>> /dev/...9-49ed-4ef1-8866-8e7a71b378b9...
>> [ OK ] Started Show Plymouth Boot Screen.
>> [ 6.544988] audit: type=1130 audit(1486033690.500:9): pid=1 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start
>> comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
>> terminal=? res=success'
>> [ OK ] Started File System Check on
>> /dev/d...229-49ed-4ef1-8866-8e7a71b378b9.[ 6.562998] audit: type=1130
>> audit(1486033690.500:10): pid=1 uid=0 auid=4294967295 ses=4294967295
>> subj=kernel msg='unit=systemd-fsck-root comm="systemd"
>> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>>
>> Mounting /sysroot...
>> [ OK ] Reached target Paths.
>> [ OK ] Started Forward Password Requests to Plymouth Directory Watch.
>> [ OK ] Reached target Basic System.
>> [ 6.815012] SGI XFS with ACLs, security attributes, no debug enabled
>> [ 6.852341] XFS (vda5): Mounting V5 Filesystem
>> [ 6.974989] XFS (vda5): Starting recovery (logdev: internal)
>> [ 6.990620] XFS (vda5): Ending recovery (logdev: internal)
>> [ OK ] Mounted /sysroot.
>> [ OK ] Reached target Initrd Root File System.
>> Starting Reload Configuration from the Real Root...
>> [ OK ] Started Reload Configuration from the Real Root.
>> [ OK ] Reached target Initrd File Systems.
>> [ OK ] Reached target Initrd Default Target.
>> Starting Cleaning Up and Shutting Down Daemons...
>> [ OK ] Stopped Cleaning Up and Shutting Down Daemons.
>> Starting Plymouth switch root service...
>> [ OK ] Stopped target Remote File Systems.
>> [ OK ] Stopped target Remote File Systems (Pre).
>> [ OK ] Stopped target Initrd Default Target.
>> [ OK ] Stopped target Basic System.
>> [ OK ] Stopped target System Initialization.
>> [ OK ] Stopped Apply Kernel Variables.
>> [ OK ] Stopped udev Coldplug all Devices.
>> [ OK ] Stopped target Local File Systems.
>> Stopping udev Kernel Device Manager...
>> [ OK ] Stopped target Slices.
>> [ OK ] Stopped target Paths.
>> [ OK ] Stopped target Sockets.
>> [ OK ] Stopped target Timers.
>> [ OK ] Stopped target Swap.
>> [ OK ] Stopped udev Kernel Device Manager.
>> [ OK ] Stopped Create Static Device Nodes in /dev.
>> [ OK ] Stopped Create list of required sta...ce nodes for the current
>> kernel.
>> [ OK ] Closed udev Control Socket.
>> [ OK ] Closed udev Kernel Socket.
>> Starting Cleanup udevd DB...
>> [ OK ] Started Plymouth switch root service.
>> [ OK ] Started Cleanup udevd DB.
>> [ OK ] Reached target Switch Root.
>> Starting Switch Root...
>> [ 8.011088] systemd-journald[133]: Received SIGTERM from PID 1
>> (systemd).
>> [ 8.102313] systemd: 11 output lines suppressed due to ratelimiting
>> [ 8.249955] SELinux: 32768 avtab hash slots, 104932 rules.
>> [ 8.406087] SELinux: 32768 avtab hash slots, 104932 rules.
>> [ 8.838270] SELinux: 8 users, 14 roles, 5021 types, 304 bools, 1
>> sens, 1024 cats
>> [ 8.841747] SELinux: 92 classes, 104932 rules
>> [ 8.877564] SELinux: Permission validate_trans in class security not
>> defined in policy.
>> [ 8.881333] SELinux: Permission module_load in class system not
>> defined in policy.
>> [ 8.885389] SELinux: Class cap_userns not defined in policy.
>> [ 8.887968] SELinux: Class cap2_userns not defined in policy.
>> [ 8.890548] SELinux: the above unknown classes and permissions will
>> be allowed
>> [ 8.893696] SELinux: Completing initialization.
>> [ 8.895757] SELinux: Setting up existing superblocks.
>> [ 8.965581] systemd[1]: Successfully loaded SELinux policy in 784.664ms.
>> [ 9.322148] systemd[1]: Relabelled /dev and /run in 275.319ms.
>>
>> Welcome to Fedora 24 (Twenty Four)!
>>
>> [ OK ] Stopped Switch Root.
>> [ OK ] Stopped Journal Service.
>> Starting Journal Service...
>> [ OK ] Reached target Encrypted Volumes.
>> Mounting Debug File System...
>> [ OK ] Created slice system-serial\x2dgetty.slice.
>> Starting Create list of required st... nodes for the current
>> kernel...
>> [ OK ] Started Forward Password Requests to Wall Directory Watch.
>> [ OK ] Stopped File System Check on Root Device.
>> [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
>> [ OK ] Created slice system-sshd\x2dkeygen.slice.
>> Starting Apply Kernel Variables...
>> [ OK ] Set up automount Arbitrary Executab...ats File System Automount
>> Point.
>> [ OK ] Reached target Remote File Systems.
>> [ OK ] Listening on udev Control Socket.
>> [ OK ] Created slice User and Session Slice.
>> [ OK ] Listening on udev Kernel Socket.
>> [ OK ] Stopped target Switch Root.
>> [ OK ] Stopped target Initrd File Systems.
>> [ OK ] Reached target Slices.
>> Starting Remount Root and Kernel File Systems...
>> Mounting POSIX Message Queue File System...
>> [ OK ] Listening on Process Core Dump Socket.
>> Mounting Huge Pages File System...
>> [ OK ] Created slice system-systemd\x2dfsck.slice.
>> [ OK ] Stopped target Initrd Root File System.
>> [ OK ] Reached target Paths.
>> Mounting Temporary Directory...
>> [ OK ] Created slice system-getty.slice.
>> [ OK ] Mounted Debug File System.
>> [ OK ] Mounted POSIX Message Queue File System.
>> [ OK ] Mounted Huge Pages File System.
>> [ OK ] Mounted Temporary Directory.
>> [ OK ] Started Journal Service.
>> [ OK ] Started Create list of required sta...ce nodes for the current
>> kernel.
>> [ OK ] Started Apply Kernel Variables.
>> [ OK ] Started Remount Root and Kernel File Systems.
>> Starting udev Coldplug all Devices...
>> Starting Configure read-only root support...
>> Starting Create Static Device Nodes in /dev...
>> Starting Flush Journal to Persistent Storage...
>> [ 10.815758] systemd-journald[260]: Received request to flush runtime
>> journal from PID 1
>> [ OK ] Started Create Static Device Nodes in /dev.
>> Starting udev Kernel Device Manager...
>> [ OK ] Reached target Local File Systems (Pre).
>> [ OK ] Started udev Coldplug all Devices.
>> [ OK ] Started Configure read-only root support.
>> Starting Load/Save Random Seed...
>> [ OK ] Started Load/Save Random Seed.
>> [ OK ] Started udev Kernel Device Manager.
>> [ 11.967825] systemd-journald[260]: File
>> /var/log/journal/ee127fef6e6044e7a6c6d6a0b5bc46e5/system.journal
>> corrupted or uncleanly shut down, renaming and replacing.
>> [ OK ] Found device /dev/ttyAMA0.
>> [ 12.618561] physmap_of_versatile: module license 'unspecified' taints
>> kernel.
>> [ 12.621748] Disabling lock debugging due to kernel taint
>> [ 12.624644] physmap_of_versatile: Unknown symbol regmap_write (err 0)
>> [ 12.627547] physmap_of_versatile: Unknown symbol
>> syscon_node_to_regmap (err 0)
>> [ 12.630664] physmap_of_versatile: Unknown symbol
>> regmap_update_bits_base (err 0)
>> [ OK ] Found device /dev/disk/by-uuid/53B5-4DD4.
>> Starting File System Check on /dev/disk/by-uuid/53B5-4DD4...
>> [ OK ] Found device
>> /dev/disk/by-uuid/74425a5b-7a60-4f2d-9390-10669f2e2ba5.
>> [ OK ] Found device
>> /dev/disk/by-uuid/9526d4b7-baa6-4ea5-8234-37d44a6ce772.
>> Activating swap
>> /dev/disk/by-uuid/9...7-baa6-4ea5-8234-37d44a6ce772...
>> Starting File System Check on
>> /dev/...b-7a60-4f2d-9390-10669f2e2ba5...
>> [ OK ] Started Flush Journal to Persistent Storage.
>> [ 13.572059] Adding 629696k swap on /dev/vda3. Priority:-1 extents:1
>> across:629696k FS
>> [ OK ] Activated swap
>> /dev/disk/by-uuid/9526d4b7-baa6-4ea5-8234-37d44a6ce772.
>> [ OK ] Reached target Swap.
>> [ OK ] Started File System Check on /dev/disk/by-uuid/53B5-4DD4.
>> [ 14.464393] virtio_net virtio0 enp0s1: renamed from eth0
>> [ OK ] Started File System Check on
>> /dev/d...a5b-7a60-4f2d-9390-10669f2e2ba5.
>> Mounting /boot...
>> [ 18.478569] EXT4-fs (vda2): mounted filesystem with ordered data
>> mode. Opts: (null)
>> [ OK ] Mounted /boot.
>> Mounting /boot/efi...
>> [ OK ] Mounted /boot/efi.
>> [ OK ] Reached target Local File Systems.
>> Starting Restore /run/initramfs on shutdown...
>> Starting Tell Plymouth To Write Out Runtime Data...
>> Starting Create Volatile Files and Directories...
>> [ OK ] Started Restore /run/initramfs on shutdown.
>> [ OK ] Started Tell Plymouth To Write Out Runtime Data.
>> [ OK ] Started Create Volatile Files and Directories.
>> Starting Security Auditing Service...
>> [ OK ] Started Security Auditing Service.
>> Starting Update UTMP about System Boot/Shutdown...
>> [ OK ] Started Update UTMP about System Boot/Shutdown.
>> [ OK ] Reached target System Initialization.
>> [ OK ] Started dnf makecache timer.
>> [ OK ] Listening on D-Bus System Message Bus Socket.
>> [ OK ] Reached target Sockets.
>> [ OK ] Reached target Basic System.
>> Starting NTP client/server...
>> Starting Login Service...
>> Starting Permit User Sessions...
>> [ OK ] Started D-Bus System Message Bus.
>> Starting firewalld - dynamic firewall daemon...
>> [ OK ] Reached target sshd-keygen.target.
>> [ OK ] Started Daily Cleanup of Temporary Directories.
>> [ OK ] Reached target Timers.
>> [ OK ] Started Permit User Sessions.
>> [ OK ] Started NTP client/server.
>> [ OK ] Started Login Service.
>> [ OK ] Started Command Scheduler.
>> Starting Wait for Plymouth Boot Screen to Quit...
>> Starting Terminate Plymouth Boot Screen...
>> [ 30.618574] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 31.481359] Ebtables v2.0 registered
>> [ 32.378644] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>> [ 33.297541] bridge: filtering via arp/ip/ip6tables is no longer
>> available by default. Update your scripts to load br_netfilter if you
>> need this.
>> [ 33.454977] Netfilter messages via NETLINK v0.30.
>> [ 33.492966] ip_set: protocol 6
>>
>> The QEMU process is blocked on ppoll():
>>
>> address@hidden ~]# strace -f -p $(pidof qemu-system-aarch64)
>> strace: Process 7116 attached with 4 threads
>> [pid 7127] rt_sigtimedwait([BUS USR1], <unfinished ...>
>> [pid 7118] rt_sigtimedwait([BUS ALRM IO], NULL, NULL, 8 <unfinished ...>
>> [pid 7127] <... rt_sigtimedwait resumed> 0x7fb25cc1d8, {tv_sec=0,
>> tv_nsec=0}, 8) = -1 EAGAIN (Resource temporarily unavailable)
>> [pid 7117] futex(0x555d899c60, FUTEX_WAIT, 4294967295, NULL <unfinished
>> ...>
>> [pid 7127] rt_sigpending([], 8) = 0
>> [pid 7127] ioctl(15, _IOC(0, 0xae, 0x80, 0x00) <unfinished ...>
>> [pid 7116] ppoll([{fd=0, events=POLLIN}, {fd=4, events=POLLIN}, {fd=7,
>> events=POLLIN}, {fd=9, events=POLLIN}, {fd=10, events=POLLIN}, {fd=17,
>> events=POLLIN}, {fd=18, events=POLLIN}], 7, NULL, NULL, 8
>>
>> but kvm_stats indicate that the guest is causing VM exits to happen:
>>
>> address@hidden ~]# kvm_stat -d -l
>> exits hvc_exit_stat mmio_exit_kernel mmio_exit_user wfe_exit_stat
>> wfi_exit_stat
>> 209953 0 0 0 0 209879
>> 210512 0 0 0 0 210403
>> 210709 0 0 0 0 210626
>> 210701 0 0 0 0 210583
>> 210726 0 0 0 0 210624
>> 210675 0 0 0 0 210570
>> 210704 0 0 0 0 210595
>> 210690 0 0 0 0 210594
>> 210712 0 0 0 0 210605
>> 210696 0 0 0 0 210597
>>
>> I also tried to enable GIC v3 by adding the “-machine gic-version=3”
>> command one option but the UEFI firmware doesn’t like that:
>
> The Linaro Wiki page you referenced states,
>
> Note that if your [emulated] hardware has a GICv3, it is essential
> that your host device tree correctly identifies the GIC as a v3, or
> KVM will kick it into a mode that is incompatible with the GICv3
> handling in UEFI running inside the guest.
>
> Are you sure that the Raspberry Pi 3's DTB (or ACPI tables, whatever)
> identify the host (i.e., physical) GIC as v3? (I know zero details about
> this, it just caught my eye as a possibly related gotcha.)
>
> Thanks
> Laszlo
>
>
>>
>> Found GIC v3 (re)distributor @ 0x8000000 (0x80A0000)
>>
>>
>> Synchronous Exception at 0x000000005BD5B820
>> PC 0x00005BD5B820 (0x00005BD58000+0x00003820) [ 0] ArmGicDxe.dll
>> PC 0x00005BD5BC38 (0x00005BD58000+0x00003C38) [ 0] ArmGicDxe.dll
>> PC 0x00005BD593B0 (0x00005BD58000+0x000013B0) [ 0] ArmGicDxe.dll
>> PC 0x00005BD590A0 (0x00005BD58000+0x000010A0) [ 0] ArmGicDxe.dll
>> PC 0x00005EF1ADF4 (0x00005EF14000+0x00006DF4) [ 1] DxeCore.dll
>> PC 0x00005EF32B0C (0x00005EF14000+0x0001EB0C) [ 1] DxeCore.dll
>> PC 0x00005EF165E4 (0x00005EF14000+0x000025E4) [ 1] DxeCore.dll
>> PC 0x00005EF15828 (0x00005EF14000+0x00001828) [ 1] DxeCore.dll
>> PC 0x00005EF15024 (0x00005EF14000+0x00001024) [ 1] DxeCore.dll
>>
>> [ 0]
>> /home/penberg/raspberrypi/uefi/edk2/Build/ArmVirtQemu-AARCH64/DEBUG_GCC5/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll
>>
>> [ 1]
>> /home/penberg/raspberrypi/uefi/edk2/Build/ArmVirtQemu-AARCH64/DEBUG_GCC5/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll
>>
>>
>> X0 0x0000000000000036 X1 0x0000000000000004 X2 0x0000000000000036
>> X3 0x0000000000000000
>> X4 0x0000000000000001 X5 0x0000000000000000 X6 0x0A01191513061C12
>> X7 0x121C06131519010A
>> X8 0x00000000041ECB83 X9 0x0000000700000000 X10 0x0000000058B60000
>> X11 0x0000000000000004
>> X12 0x0000000000000001 X13 0x0000000000000008 X14 0x0000000000000000
>> X15 0x0000000000000000
>> X16 0x000000005EF13DF0 X17 0x0000000000000000 X18 0x0000000000000000
>> X19 0x000000004007C268
>> X20 0x0000000000000000 X21 0x0000000000000000 X22 0x0000000000000000
>> X23 0x0000000000000000
>> X24 0x0000000000000000 X25 0x0000000000000000 X26 0x0000000000000000
>> X27 0x0000000000000000
>> X28 0x0000000000000000 FP 0x000000005EF13D20 LR 0x000000005BD5BC38
>>
>> V0 0xAFAFAFAFAFAFAFAF AFAFAFAFAFAFAFAF V1 0x0000000000000000
>> 0000000000000000
>> V2 0x0000000000000000 0000000000000000 V3 0x0000000000000000
>> 0000000000000000
>> V4 0x0000000000000000 0000000000000000 V5 0x0000000000000000
>> 0000000000000000
>> V6 0x0000000000000000 0000000000000000 V7 0x0000000000000000
>> 0000000000000000
>> V8 0x0000000000000000 0000000000000000 V9 0x0000000000000000
>> 0000000000000000
>> V10 0x0000000000000000 0000000000000000 V11 0x0000000000000000
>> 0000000000000000
>> V12 0x0000000000000000 0000000000000000 V13 0x0000000000000000
>> 0000000000000000
>> V14 0x0000000000000000 0000000000000000 V15 0x0000000000000000
>> 0000000000000000
>> V16 0x0000000000000000 0000000000000000 V17 0x0000000000000000
>> 0000000000000000
>> V18 0x0000000000000000 0000000000000000 V19 0x0000000000000000
>> 0000000000000000
>> V20 0x0000000000000000 0000000000000000 V21 0x0000000000000000
>> 0000000000000000
>> V22 0x0000000000000000 0000000000000000 V23 0x0000000000000000
>> 0000000000000000
>> V24 0x0000000000000000 0000000000000000 V25 0x0000000000000000
>> 0000000000000000
>> V26 0x0000000000000000 0000000000000000 V27 0x0000000000000000
>> 0000000000000000
>> V28 0x0000000000000000 0000000000000000 V29 0x0000000000000000
>> 0000000000000000
>> V30 0x0000000000000000 0000000000000000 V31 0x0000000000000000
>> 0000000000000000
>>
>> SP 0x000000005EF13D20 ELR 0x000000005BD5B820 SPSR 0x80000205 FPSR
>> 0x00000000
>> ESR 0x02000000 FAR 0x1DE7EC7EDBADC0DE
>>
>> ESR : EC 0x00 IL 0x1 ISS 0x00000000
>>
>> Stack dump:
>> 000005EF13C20: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13C40: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13C60: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13C80: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13CA0: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13CC0: 0000000000000000 0000000000000000 0000000000000000
>> 0000000000000000
>> 000005EF13CE0: 0000000000000000 0000000000000000 000000005BD5B820
>> 0000000080000205
>> 000005EF13D00: 0000000000000000 0000000002000000 1DE7EC7EDBADC0DE
>> 121C06131519010A
>>> 000005EF13D20: 000000005EF13D90 000000005BD593B0 0000000000000002
>> 0000000000000002
>> 000005EF13D40: 0000002000000027 000000005FFC1524 000000005BE2F000
>> 000000005BD59234
>> 000005EF13D60: 0000000000000000 00000000080A0000 0000000008000000
>> 0000000000000000
>> 000005EF13D80: 0000000000000003 000000005AD10B18 000000005EF13DC0
>> 000000005BD590A0
>> 000005EF13DA0: 000000005BFF0018 000000005AD10B18 000000005EF13DF0
>> 0000000000000000
>> 000005EF13DC0: 000000005EF13DF0 000000005EF1ADF4 000000005BFF0018
>> 000000005AD10B18
>> 000005EF13DE0: 000000005EF13DF0 000000005AD10818 000000005EF13E70
>> 000000005EF32B0C
>> 000005EF13E00: 000000005EF13E30 0000000000000000 0000000000000000
>> 000000005AD10B18
>> ASSERT [ArmCpuDxe]
>> /home/penberg/raspberrypi/uefi/edk2/ArmPkg/Library/DefaultExceptionHandlerLib/AArch64/DefaultExceptionHandler.c(265):
>> ((BOOLEAN)(0==1))
>>
>> Regards,
>>
>> - Pekka
>>
>