[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] scsi-disk: fix crash on VERIFY command
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-devel] [PATCH] scsi-disk: fix crash on VERIFY command |
Date: |
Mon, 2 Jan 2017 10:34:00 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.5.1 |
On 29/12/2016 13:19, Zhang Qian wrote:
> From c2f1631132821d61e1942a8723ba596f91d3e672 Mon Sep 17 00:00:00 2001
> From: Zhang Qian <address@hidden>
> Date: Thu, 29 Dec 2016 20:00:01 +0800
> Subject: [PATCH] scsi-disk: fix crash on VERIFY command Commit 166dbda
> "scsi-disk: fix VERIFY for scsi-block" add a process of VERIFY in
> scsi_block_dma_command. But, the cmd.mode of req is SCSI_XFER_NONE, the req
> is handled as a read operation. A verify command is not an actual read (we do
> not implement compare mode) and thus does not have an AIOCB attached. so, it
> will be crash in scsi_dma_complete. Commit ef8489d "scsi: avoid assertion
> failure on VERIFY command" is added to process verify command, so we treat
> verify command as a write operation.
> Signed-off-by: Zhang Qian <address@hidden>
I am not sure what the issue is, and your commit message doesn't explain
it. There are a few unclear aspects:
1) the mode is set in scsi_cmd_xfer_mode. For VERIFY, it is only
SCSI_XFER_NONE if the transferred data is empty, otherwise it is
SCSI_XFER_TO_DEV. For BYTCHK=0x01, scsi_req_xfer sets cmd->xfer
correctly to number-of-blocks * block-size.
2) Your message does not say if you're using scsi-block or
scsi-disk/scsi-hd. Only scsi-block uses scsi_disk_dma_command for
VERIFY, and it does have an AIOCB (created by scsi_block_dma_writev).
If you were using virtio-scsi, then a wrong request from the guest might
have BYTCHK=0x01 and SCSI_XFER_NONE (see virtio_scsi_parse_cdb).
However, this does not affect whether the request has an AIOCB attached.
Please explain the issue better and, if it is for scsi-disk or scsi-hd,
please provide a testcase in tests/virtio-scsi-tests.c.
Thanks,
Paolo
> ---
> hw/scsi/scsi-disk.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
>
> diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
> index bdd1e5f..ab05bf9 100644
> --- a/hw/scsi/scsi-disk.c
> +++ b/hw/scsi/scsi-disk.c
> @@ -2170,6 +2170,10 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req,
> uint8_t *buf)
> if (!check_lba_range(s, r->req.cmd.lba, len)) {
> goto illegal_lba;
> }
> + if (command == VERIFY_10 || command == VERIFY_12 ||
> + command == VERIFY_16) {
> + r->req.cmd.mode = SCSI_XFER_TO_DEV;
> + }
> r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
> r->sector_count = len * (s->qdev.blocksize / 512);
> break;
>
- Re: [Qemu-devel] [PATCH] scsi-disk: fix crash on VERIFY command,
Paolo Bonzini <=