[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [kvm-unit-tests PATCH v8 3/3] arm: pmu: Add CPI checking
From: |
Wei Huang |
Subject: |
[Qemu-devel] [kvm-unit-tests PATCH v8 3/3] arm: pmu: Add CPI checking |
Date: |
Tue, 8 Nov 2016 12:17:15 -0600 |
From: Christopher Covington <address@hidden>
Calculate the numbers of cycles per instruction (CPI) implied by ARM
PMU cycle counter values. The code includes a strict checking facility
intended for the -icount option in TCG mode in the configuration file.
Signed-off-by: Christopher Covington <address@hidden>
Signed-off-by: Wei Huang <address@hidden>
---
arm/pmu.c | 101 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
arm/unittests.cfg | 14 ++++++++
2 files changed, 114 insertions(+), 1 deletion(-)
diff --git a/arm/pmu.c b/arm/pmu.c
index d5e3ac3..09aff89 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -15,6 +15,7 @@
#include "libcflat.h"
#define PMU_PMCR_E (1 << 0)
+#define PMU_PMCR_C (1 << 2)
#define PMU_PMCR_N_SHIFT 11
#define PMU_PMCR_N_MASK 0x1f
#define PMU_PMCR_ID_SHIFT 16
@@ -75,6 +76,23 @@ static inline void pmccfiltr_write(uint32_t value)
pmselr_write(PMU_CYCLE_IDX);
pmxevtyper_write(value);
}
+
+/*
+ * Extra instructions inserted by the compiler would be difficult to compensate
+ * for, so hand assemble everything between, and including, the PMCR accesses
+ * to start and stop counting.
+ */
+static inline void loop(int i, uint32_t pmcr)
+{
+ asm volatile(
+ " mcr p15, 0, %[pmcr], c9, c12, 0\n"
+ "1: subs %[i], %[i], #1\n"
+ " bgt 1b\n"
+ " mcr p15, 0, %[z], c9, c12, 0\n"
+ : [i] "+r" (i)
+ : [pmcr] "r" (pmcr), [z] "r" (0)
+ : "cc");
+}
#elif defined(__aarch64__)
static inline uint32_t pmcr_read(void)
{
@@ -106,6 +124,23 @@ static inline void pmccfiltr_write(uint32_t value)
{
asm volatile("msr pmccfiltr_el0, %0" : : "r" (value));
}
+
+/*
+ * Extra instructions inserted by the compiler would be difficult to compensate
+ * for, so hand assemble everything between, and including, the PMCR accesses
+ * to start and stop counting.
+ */
+static inline void loop(int i, uint32_t pmcr)
+{
+ asm volatile(
+ " msr pmcr_el0, %[pmcr]\n"
+ "1: subs %[i], %[i], #1\n"
+ " b.gt 1b\n"
+ " msr pmcr_el0, xzr\n"
+ : [i] "+r" (i)
+ : [pmcr] "r" (pmcr)
+ : "cc");
+}
#endif
/*
@@ -156,8 +191,71 @@ static bool check_cycles_increase(void)
return true;
}
-int main(void)
+/*
+ * Execute a known number of guest instructions. Only odd instruction counts
+ * greater than or equal to 3 are supported by the in-line assembly code. The
+ * control register (PMCR_EL0) is initialized with the provided value (allowing
+ * for example for the cycle counter or event counters to be reset). At the end
+ * of the exact instruction loop, zero is written to PMCR_EL0 to disable
+ * counting, allowing the cycle counter or event counters to be read at the
+ * leisure of the calling code.
+ */
+static void measure_instrs(int num, uint32_t pmcr)
+{
+ int i = (num - 1) / 2;
+
+ assert(num >= 3 && ((num - 1) % 2 == 0));
+ loop(i, pmcr);
+}
+
+/*
+ * Measure cycle counts for various known instruction counts. Ensure that the
+ * cycle counter progresses (similar to check_cycles_increase() but with more
+ * instructions and using reset and stop controls). If supplied a positive,
+ * nonzero CPI parameter, also strictly check that every measurement matches
+ * it. Strict CPI checking is used to test -icount mode.
+ */
+static bool check_cpi(int cpi)
+{
+ uint32_t pmcr = pmcr_read() | PMU_PMCR_C | PMU_PMCR_E;
+
+ if (cpi > 0)
+ printf("Checking for CPI=%d.\n", cpi);
+ printf("instrs : cycles0 cycles1 ...\n");
+
+ for (int i = 3; i < 300; i += 32) {
+ int avg, sum = 0;
+
+ printf("%d :", i);
+ for (int j = 0; j < NR_SAMPLES; j++) {
+ int cycles;
+
+ measure_instrs(i, pmcr);
+ cycles =pmccntr_read();
+ printf(" %d", cycles);
+
+ if (!cycles || (cpi > 0 && cycles != i * cpi)) {
+ printf("\n");
+ return false;
+ }
+
+ sum += cycles;
+ }
+ avg = sum / NR_SAMPLES;
+ printf(" sum=%d avg=%d avg_ipc=%d avg_cpi=%d\n",
+ sum, avg, i / avg, avg / i);
+ }
+
+ return true;
+}
+
+int main(int argc, char *argv[])
{
+ int cpi = 0;
+
+ if (argc >= 1)
+ cpi = atol(argv[0]);
+
report_prefix_push("pmu");
/* init for PMU event access, right now only care about cycle count */
@@ -166,6 +264,7 @@ int main(void)
report("Control register", check_pmcr());
report("Monotonically increasing cycle count", check_cycles_increase());
+ report("Cycle/instruction ratio", check_cpi(cpi));
return report_summary();
}
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index 7645180..2050dc8 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -59,3 +59,17 @@ groups = selftest
[pmu]
file = pmu.flat
groups = pmu
+
+# Test PMU support (TCG) with -icount IPC=1
+[pmu-tcg-icount-1]
+file = pmu.flat
+extra_params = -icount 0 -append '1'
+groups = pmu
+accel = tcg
+
+# Test PMU support (TCG) with -icount IPC=256
+[pmu-tcg-icount-256]
+file = pmu.flat
+extra_params = -icount 8 -append '256'
+groups = pmu
+accel = tcg
--
1.8.3.1
- [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, (continued)
- [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Wei Huang, 2016/11/08
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2016/11/11
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Wei Huang, 2016/11/11
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2016/11/14
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Christopher Covington, 2016/11/14
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Wei Huang, 2016/11/15
- Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2016/11/16
Re: [Qemu-devel] [kvm-unit-tests PATCH v8 2/3] arm: pmu: Check cycle count increases, Andrew Jones, 2016/11/16
[Qemu-devel] [kvm-unit-tests PATCH v8 1/3] arm: Add PMU test, Wei Huang, 2016/11/08
[Qemu-devel] [kvm-unit-tests PATCH v8 3/3] arm: pmu: Add CPI checking,
Wei Huang <=