[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Fwd: Virtio related trace events.
|
From: |
Gadre Nayan |
|
Subject: |
[Qemu-devel] Fwd: Virtio related trace events. |
|
Date: |
Tue, 9 Aug 2016 09:20:06 +0530 |
I am unable to get the virtio related events in either the
guest or the host.
My understanding is that in the Guest OS, I will have a virtio-blk
which is the driver, the device is the virtio-transport or the
virtio-queue, then the virtio-queue will raise a kick to then dispatch
the block request to the Host kernel block sub system.
So where will be the virtio, virtqueue events be seen in the traces,
in guest or in host ?
I have a guest and host where the following events are registerred:
echo 1 > kvm/enable [ this event is enabled Only on Host, rest are on
both guest and host]
echo 1 > block/enable
echo 1 > scsi/enable
echo virtqueue_kick_prepare > /sys/kernel/debug/tracing/set_ftrace_filter
echo virtqueue_kick >> /sys/kernel/debug/tracing/set_ftrace_filter
echo scsi_kick_queue >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_match >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_config_changed >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_uevent >> /sys/kernel/debug/tracing/set_ftrace_filter
echo unregister_virtio_driver >> /sys/kernel/debug/tracing/set_ftrace_filter
echo register_virtio_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo unregister_virtio_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_init >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_check_driver_offered_feature >>
/sys/kernel/debug/tracing/set_ftrace_filter
echo register_virtio_driver >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_finalize_features >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_config_enable >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_device_restore >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_device_freeze >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_break_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_mmio_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_mmio_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_modern_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_modern_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_release_dev >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_restore >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_freeze >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_legacy_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_legacy_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_queue_rq >> /sys/kernel/debug/tracing/set_ftrace_filter
However the traces don't show a virt related event.
I launch QEMU using:
qemu-system-x86_64 -drive
file=/home/gnayan/CUSTOM_QEMU_SYSTEM/UBUNTU/ubuntu.img,if=virtio,format=raw
-m 1G -net nic,model=virtio -net user -redir tcp:2222::22 -enable-kvm
&
Please suggest
Thanks
---------- Forwarded message ----------
From: Gadre Nayan <address@hidden>
Date: Tue, Aug 9, 2016 at 9:15 AM
Subject: Virtio related trace events.
To: address@hidden, address@hidden
I am unable to get the virtio related events in either the
guest or the host.
My understanding is that in the Guest OS, I will have a virtio-blk
which is the driver, the device is the virtio-transport or the
virtio-queue, then the virtio-queue will raise a kick to then dispatch
the block request to the Host kernel block sub system.
So where will be the virtio, virtqueue events be seen in the traces,
in guest or in host ?
I have a guest and host where the following events are registerred:
echo 1 > kvm/enable [ this event is enabled Only on Host, rest are on
both guest and host]
echo 1 > block/enable
echo 1 > scsi/enable
echo virtqueue_kick_prepare > /sys/kernel/debug/tracing/set_ftrace_filter
echo virtqueue_kick >> /sys/kernel/debug/tracing/set_ftrace_filter
echo scsi_kick_queue >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_match >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_config_changed >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_uevent >> /sys/kernel/debug/tracing/set_ftrace_filter
echo unregister_virtio_driver >> /sys/kernel/debug/tracing/set_ftrace_filter
echo register_virtio_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo unregister_virtio_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_init >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_check_driver_offered_feature >>
/sys/kernel/debug/tracing/set_ftrace_filter
echo register_virtio_driver >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_finalize_features >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_config_enable >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_dev_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_device_restore >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_device_freeze >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_break_device >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_mmio_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_mmio_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_modern_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_modern_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_release_dev >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_restore >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_freeze >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_legacy_probe >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_pci_legacy_remove >> /sys/kernel/debug/tracing/set_ftrace_filter
echo virtio_queue_rq >> /sys/kernel/debug/tracing/set_ftrace_filter
However the traces don't show a virt related event.
I launch QEMU using:
qemu-system-x86_64 -drive
file=/home/gnayan/CUSTOM_QEMU_SYSTEM/UBUNTU/ubuntu.img,if=virtio,format=raw
-m 1G -net nic,model=virtio -net user -redir tcp:2222::22 -enable-kvm
&
Please suggest
Thanks