qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v5 5/6] acpi: Add IPMI table entries


From: Igor Mammedov
Subject: Re: [Qemu-devel] [PATCH v5 5/6] acpi: Add IPMI table entries
Date: Fri, 20 May 2016 11:53:44 +0200

On Thu, 19 May 2016 10:24:01 -0500
address@hidden wrote:

> From: Corey Minyard <address@hidden>
> 
> Use the new ACPI table construction tools to create an ACPI
> entry for IPMI.  This adds a function called from build_dsdt
> to add an DSDT entry for IPMI if IPMI is compiled in and has
> registered firmware.  It also adds a dummy function if IPMI
> is not compiled in.
> 
> This conforms to section "C3-2 Locating IPMI System Interfaces in
> ACPI Name Space" in the IPMI 2.0 specification.
> 
> Signed-off-by: Corey Minyard <address@hidden>
> ---
>  hw/acpi/Makefile.objs  |   2 +
>  hw/acpi/ipmi.c         | 114 
> +++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/acpi/noipmi.c       |  14 ++++++
>  hw/i386/acpi-build.c   |  10 +++--
>  hw/i386/pc_piix.c      |   1 +
>  hw/i386/pc_q35.c       |   1 +
>  include/hw/acpi/ipmi.h |  22 ++++++++++
>  include/hw/i386/pc.h   |   1 +
>  8 files changed, 162 insertions(+), 3 deletions(-)
>  create mode 100644 hw/acpi/ipmi.c
>  create mode 100644 hw/acpi/noipmi.c
>  create mode 100644 include/hw/acpi/ipmi.h
> 
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index faee86c..b8d5c84 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,3 +6,5 @@ obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>  common-obj-$(CONFIG_ACPI) += acpi_interface.o
>  common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
>  common-obj-$(CONFIG_ACPI) += aml-build.o
> +common-obj-$(call land,$(CONFIG_ACPI),$(CONFIG_IPMI)) += ipmi.o
> +common-obj-$(call land,$(CONFIG_ACPI),$(call lnot,$(CONFIG_IPMI))) += 
> noipmi.o
> diff --git a/hw/acpi/ipmi.c b/hw/acpi/ipmi.c
> new file mode 100644
> index 0000000..3d61550
> --- /dev/null
> +++ b/hw/acpi/ipmi.c
> @@ -0,0 +1,114 @@
> +/*
> + * IPMI ACPI firmware handling
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/ipmi/ipmi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/ipmi.h"
> +
> +static Aml *aml_ipmi_crs(IPMIFwInfo *info, const char *scope)
scope is unused inside this function, drop it?

> +{
> +    Aml *crs = aml_resource_template();
> +    uint8_t regspacing = info->register_spacing;
> +
> +    /*
> +     * The base address is fixed and cannot change.  That may be different
> +     * if someone does PCI, but we aren't there yet.
> +     */
> +    switch (info->memspace) {
> +    case IPMI_MEMSPACE_IO:
> +        aml_append(crs, aml_io(AML_DECODE16, info->base_address,
> +                               info->base_address + info->register_length - 
> 1,
> +                               regspacing, info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_MEM32:
> +        aml_append(crs,
> +                   aml_dword_memory(AML_POS_DECODE,
> +                            AML_MIN_FIXED, AML_MAX_FIXED,
> +                            AML_NON_CACHEABLE, AML_READ_WRITE,
> +                            0xffffffff,
> +                            info->base_address,
> +                            info->base_address + info->register_length - 1,
> +                            regspacing, info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_MEM64:
> +        aml_append(crs,
> +                   aml_qword_memory(AML_POS_DECODE,
> +                            AML_MIN_FIXED, AML_MAX_FIXED,
> +                            AML_NON_CACHEABLE, AML_READ_WRITE,
> +                            0xffffffffffffffffULL,
> +                            info->base_address,
> +                            info->base_address + info->register_length - 1,
> +                            regspacing, info->register_length));
> +        break;
> +    case IPMI_MEMSPACE_SMBUS:
> +        aml_append(crs, aml_return(aml_int(info->base_address)));
> +        break;
> +    default:
> +        abort();
> +    }
> +
> +    if (info->interrupt_number) {
> +        aml_append(crs, aml_irq_no_flags(info->interrupt_number));
> +    }
> +
> +    return crs;
> +}
> +
> +static void ipmi_encode_one_acpi(Aml *table, IPMIFwInfo *info,
> +                                 const char *resource)
it seems that 'resource' is used incorrectly in this patch,
or more exactly it's not needed.

s/ipmi_encode_one_acpi/acpi_ipmi_device/
drop 'table' and 'resource' args and make it return
'dev' it composes.

> +{
> +    Aml *dev, *method;
> +    uint16_t version = ((info->ipmi_spec_major_revision << 8)
> +                        | (info->ipmi_spec_minor_revision << 4));
> +
> +    dev = aml_device("MI0");
> +    aml_append(dev, aml_name_decl("_HID", aml_eisaid("IPI0001")));
> +    aml_append(dev, aml_name_decl("_STR", aml_string("ipmi_%s",
> +                                                     info->interface_name)));
> +    aml_append(dev, aml_name_decl("_UID", aml_int(info->uuid)));
> +    aml_append(dev, aml_name_decl("_CRS", aml_ipmi_crs(info, resource)));
> +
> +    /*
> +     * The spec seems to require these to be methods.  All the examples
> +     * show them this way and it doesn't seem to work if they are not.
> +     */
> +    method = aml_method("_IFT", 0, AML_NOTSERIALIZED);
> +    aml_append(method, aml_return(aml_int(info->interface_type)));
> +    aml_append(dev, method);
> +    method = aml_method("_SRV", 0, AML_NOTSERIALIZED);
> +    aml_append(method, aml_return(aml_int(version)));
> +    aml_append(dev, method);
replace these methods with aml_name_decl() as they do not contain any logic
except of returning static value.

> +
> +    aml_append(table, dev);
> +}
> +
> +void acpi_add_ipmi(Aml *table, BusState *bus, const char *resource)
s/acpi_add_ipmi/build_acpi_ipmi_devices/

drop 'resource'
s/table/scope/

> +{
> +    BusChild *kid;
> +
> +    QTAILQ_FOREACH(kid, &bus->children,  sibling) {
> +        DeviceState *dev = kid->child;
> +        Object *obj = object_dynamic_cast(OBJECT(dev), TYPE_IPMI_INTERFACE);
> +        IPMIInterface *ii;
> +        IPMIInterfaceClass *iic;
> +        IPMIFwInfo info;
> +
> +        if (!obj) {
> +            continue;
> +        }
> +
> +        ii = IPMI_INTERFACE(obj);
> +        iic = IPMI_INTERFACE_GET_CLASS(obj);
> +        memset(&info, 0, sizeof(info));
> +        iic->get_fwinfo(ii, &info);
> +        ipmi_encode_one_acpi(table, &info, resource);
aml_append(scope, my_ipmi_device)

> +    }
> +}
> diff --git a/hw/acpi/noipmi.c b/hw/acpi/noipmi.c
> new file mode 100644
> index 0000000..dd7590d
> --- /dev/null
> +++ b/hw/acpi/noipmi.c
move this to .a/stubs/

> @@ -0,0 +1,14 @@
> +/*
> + * IPMI ACPI firmware handling
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "hw/acpi/ipmi.h"
> +
> +void acpi_add_ipmi(Aml *table, BusState *bus, const char *resource)
> +{
> +}
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 279f0d7..101082d 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -59,6 +59,8 @@
>  #include "qapi/qmp/qint.h"
>  #include "qom/qom-qobject.h"
>  
> +#include "hw/acpi/ipmi.h"
> +
>  /* These are used to size the ACPI tables for -M pc-i440fx-1.7 and
>   * -M pc-i440fx-2.0.  Even if the actual amount of AML generated grows
>   * a little bit, there should be plenty of free space since the DSDT
> @@ -1445,7 +1447,7 @@ static Aml *build_com_device_aml(uint8_t uid)
>      return dev;
>  }
>  
> -static void build_isa_devices_aml(Aml *table)
> +static void build_isa_devices_aml(Aml *table, ISABus *isa_bus)
>  {
>      ISADevice *fdc = pc_find_fdc0();
>  
> @@ -1461,6 +1463,8 @@ static void build_isa_devices_aml(Aml *table)
>      aml_append(scope, build_com_device_aml(1));
>      aml_append(scope, build_com_device_aml(2));
>  
> +    acpi_add_ipmi(scope, BUS(isa_bus), "\\_SB.PCI0.ISA");
> +
>      aml_append(table, scope);
>  }
>  
> @@ -2011,7 +2015,7 @@ build_dsdt(GArray *table_data, GArray *linker,
>          build_hpet_aml(dsdt);
>          build_piix4_pm(dsdt);
>          build_piix4_isa_bridge(dsdt);
> -        build_isa_devices_aml(dsdt);
> +        build_isa_devices_aml(dsdt, pcms->isa_bus);
I'm not sure about adding 'isa_bus' field to PCMachineState,
it might be better to find a ISA bus object internally in
build_isa_devices_aml() and assert if found more than one,
since code assumes that there is only one anyway.

>          build_piix4_pci_hotplug(dsdt);
>          build_piix4_pci0_int(dsdt);
>      } else {
> @@ -2039,7 +2043,7 @@ build_dsdt(GArray *table_data, GArray *linker,
>  
>          build_hpet_aml(dsdt);
>          build_q35_isa_bridge(dsdt);
> -        build_isa_devices_aml(dsdt);
> +        build_isa_devices_aml(dsdt, pcms->isa_bus);
>          build_q35_pci0_int(dsdt);
>      }
>  
> diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
> index 7f50116..2e5ff45 100644
> --- a/hw/i386/pc_piix.c
> +++ b/hw/i386/pc_piix.c
> @@ -185,6 +185,7 @@ static void pc_init1(MachineState *machine,
>                                &error_abort);
>          no_hpet = 1;
>      }
> +    pcms->isa_bus = isa_bus;
>      isa_bus_irqs(isa_bus, gsi);
>  
>      if (kvm_pic_in_kernel()) {
> diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
> index 04aae89..027655b 100644
> --- a/hw/i386/pc_q35.c
> +++ b/hw/i386/pc_q35.c
> @@ -190,6 +190,7 @@ static void pc_q35_init(MachineState *machine)
>                   ICH9_LPC_NB_PIRQS);
>      pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
>      isa_bus = ich9_lpc->isa_bus;
> +    pcms->isa_bus = isa_bus;
>  
>      /*end early*/
>      isa_bus_irqs(isa_bus, gsi);
> diff --git a/include/hw/acpi/ipmi.h b/include/hw/acpi/ipmi.h
> new file mode 100644
> index 0000000..67d6e2f
> --- /dev/null
> +++ b/include/hw/acpi/ipmi.h
> @@ -0,0 +1,22 @@
> +/*
> + * QEMU IPMI ACPI handling
> + *
> + * Copyright (c) 2015 Corey Minyard <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +#ifndef HW_ACPI_IPMI_H
> +#define HW_ACPI_IPMI_H
> +
> +#include "qemu/osdep.h"
> +#include "hw/acpi/aml-build.h"
> +
> +/*
> + * Add ACPI IPMI entries for all registered IPMI devices whose parent
> + * bus matches the given bus.  The resource is the ACPI resource that
> + * contains the IPMI device, this is required for the I2C CRS.
> + */
> +void acpi_add_ipmi(Aml *table, BusState *bus, const char *resource);
> +
> +#endif /* HW_ACPI_IPMI_H */
> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
> index 96f0b66..aa8bc97 100644
> --- a/include/hw/i386/pc.h
> +++ b/include/hw/i386/pc.h
> @@ -51,6 +51,7 @@ struct PCMachineState {
>      HotplugHandler *acpi_dev;
>      ISADevice *rtc;
>      PCIBus *bus;
> +    ISABus *isa_bus;
>      FWCfgState *fw_cfg;
>  
>      /* Configuration options: */




reply via email to

[Prev in Thread] Current Thread [Next in Thread]