qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH] Added the -m flag feature to stellaris boards


From: Aurelio Remonda
Subject: [Qemu-devel] [PATCH] Added the -m flag feature to stellaris boards
Date: Tue, 15 Mar 2016 13:14:48 -0300

This patch adds the memory flag to both stellaris LM3S811EVB
and LM3S6965EVB.

The hardcoded dc0 values for both boards still exists but now the higher 16 bits
are calculated based on ram_size which could be either user-given or the default
one. Then the sram_size is calculated as usual, flash_size is not affected by
this.

As the higher part of dc0 has a top value of 0xffff, the boards won't accept a
size value larger than 16M. We'll throw an error if the user tries to make the
RAM larger than that.

The default RAM sizes are now set in the boards' respective class_init
functions.

I tested this on the LM3S6965evb doing a full system emulation.
I couldn't try this on the LM3S811EVB since I am using RTEMS and it does
not support that board.

Signed-off-by: Aurelio Remonda <address@hidden>

---
 hw/arm/stellaris.c | 38 +++++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 0114e0a..dbbb1c8 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -17,6 +17,7 @@
 #include "hw/boards.h"
 #include "exec/address-spaces.h"
 #include "sysemu/sysemu.h"
+#include "qemu/error-report.h"

 #define GPIO_A 0
 #define GPIO_B 1
@@ -31,17 +32,21 @@
 #define BP_GAMEPAD   0x04

 #define NUM_IRQ_LINES 64
+#define LM3S811EVB_DEFAULT_DC0 0x00001f00 /* Default value for dc0 sram_size 
half */
+#define LM3S6965EVB_DEFAULT_DC0 0x0000ff00 /* Default value for dc0 sram_size 
half */
+#define DC0_MAX_SRAM 0xffff /* Maximum value for sram half in dc0 register */
+#define DC0_SRAM_SHIFT 16

-typedef const struct {
+typedef struct {
     const char *name;
-    uint32_t did0;
-    uint32_t did1;
+    const uint32_t did0;
+    const uint32_t did1;
     uint32_t dc0;
-    uint32_t dc1;
-    uint32_t dc2;
-    uint32_t dc3;
-    uint32_t dc4;
-    uint32_t peripherals;
+    const uint32_t dc1;
+    const uint32_t dc2;
+    const uint32_t dc3;
+    const uint32_t dc4;
+    const uint32_t peripherals;
 } stellaris_board_info;

 /* General purpose timer module.  */
@@ -1190,7 +1195,7 @@ static stellaris_board_info stellaris_boards[] = {
   { "LM3S811EVB",
     0,
     0x0032000e,
-    0x001f001f, /* dc0 */
+    0x0000001f, /* dc0 */
     0x001132bf,
     0x01071013,
     0x3f0f01ff,
@@ -1200,7 +1205,7 @@ static stellaris_board_info stellaris_boards[] = {
   { "LM3S6965EVB",
     0x10010002,
     0x1073402e,
-    0x00ff007f, /* dc0 */
+    0x0000007f, /* dc0 */
     0x001133ff,
     0x030f5317,
     0x0f0f87ff,
@@ -1223,7 +1228,7 @@ static void stellaris_init(const char *kernel_filename, 
const char *cpu_model,
     qemu_irq gpio_in[7][8];
     qemu_irq gpio_out[7][8];
     qemu_irq adc;
-    int sram_size;
+    unsigned int sram_size;
     int flash_size;
     I2CBus *i2c;
     DeviceState *dev;
@@ -1234,6 +1239,15 @@ static void stellaris_init(const char *kernel_filename, 
const char *cpu_model,
     MemoryRegion *flash = g_new(MemoryRegion, 1);
     MemoryRegion *system_memory = get_system_memory();

+    /* RAM size should be divided by 256 in order to get a valid 16 bits dc0 
value */
+    ram_size = (ram_size >> 8) - 1;
+
+    if (ram_size > DC0_MAX_SRAM) {
+        error_report("Requested RAM size is too big for this board. The 
maximum allowed is 16M.");
+        exit(EXIT_FAILURE);
+    }
+
+    board->dc0 |= ram_size << DC0_SRAM_SHIFT;
     flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024;
     sram_size = ((board->dc0 >> 18) + 1) * 1024;

@@ -1391,6 +1405,7 @@ static void lm3s811evb_class_init(ObjectClass *oc, void 
*data)

     mc->desc = "Stellaris LM3S811EVB";
     mc->init = lm3s811evb_init;
+    mc->default_ram_size = LM3S811EVB_DEFAULT_DC0;
 }

 static const TypeInfo lm3s811evb_type = {
@@ -1405,6 +1420,7 @@ static void lm3s6965evb_class_init(ObjectClass *oc, void 
*data)

     mc->desc = "Stellaris LM3S6965EVB";
     mc->init = lm3s6965evb_init;
+    mc->default_ram_size = LM3S6965EVB_DEFAULT_DC0;
 }

 static const TypeInfo lm3s6965evb_type = {
--
2.7.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]