[Qemu-devel] [PULL v3 1/8] vfio: Add sysfsdev property for pci & platform

[Alex Williamson]

vfio-pci currently requires a host= parameter, which comes in the
form of a PCI address in [domain:]<bus:slot.function> notation.  We
expect to find a matching entry in sysfs for that under
/sys/bus/pci/devices/.  vfio-platform takes a similar approach, but
defines the host= parameter to be a string, which can be matched
directly under /sys/bus/platform/devices/.  On the PCI side, we have
some interest in using vfio to expose vGPU devices.  These are not
actual discrete PCI devices, so they don't have a compatible host PCI
bus address or a device link where QEMU wants to look for it.  There's
also really no requirement that vfio can only be used to expose
physical devices, a new vfio bus and iommu driver could expose a
completely emulated device.  To fit within the vfio framework, it
would need a kernel struct device and associated IOMMU group, but
those are easy constraints to manage.

To support such devices, which would include vGPUs, that honor the
VFIO PCI programming API, but are not necessarily backed by a unique
PCI address, add support for specifying any device in sysfs.  The
vfio API already has support for probing the device type to ensure
compatibility with either vfio-pci or vfio-platform.

With this, a vfio-pci device could either be specified as:

-device vfio-pci,host=02:00.0

or

-device vfio-pci,sysfsdev=/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0

or even

-device vfio-pci,sysfsdev=/sys/bus/pci/devices/0000:02:00.0

When vGPU support comes along, this might look something more like:

-device vfio-pci,sysfsdev=/sys/devices/virtual/intel-vgpu/address@hidden:00:02.0

NB - This is only a made up example path

The same change is made for vfio-platform, specifying sysfsdev has
precedence over the old host option.

Tested-by: Eric Auger <address@hidden>
Reviewed-by: Eric Auger <address@hidden>
Signed-off-by: Alex Williamson <address@hidden>
---
 hw/vfio/pci.c                 |  130 +++++++++++++++++------------------------
 hw/vfio/platform.c            |   55 ++++++++++-------
 include/hw/vfio/vfio-common.h |    1 
 3 files changed, 86 insertions(+), 100 deletions(-)

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 20b505f..ef9faf6 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -895,12 +895,8 @@ static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
     if (vdev->pdev.romfile || !vdev->pdev.rom_bar) {
         /* Since pci handles romfile, just print a message and return */
         if (vfio_blacklist_opt_rom(vdev) && vdev->pdev.romfile) {
-            error_printf("Warning : Device at %04x:%02x:%02x.%x "
-                         "is known to cause system instability issues during "
-                         "option rom execution. "
-                         "Proceeding anyway since user specified romfile\n",
-                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
-                         vdev->host.function);
+            error_printf("Warning : Device at %s is known to cause system 
instability issues during option rom execution. Proceeding anyway since user 
specified romfile\n",
+                         vdev->vbasedev.name);
         }
         return;
     }
@@ -913,9 +909,7 @@ static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
         pwrite(fd, &size, 4, offset) != 4 ||
         pread(fd, &size, 4, offset) != 4 ||
         pwrite(fd, &orig, 4, offset) != 4) {
-        error_report("%s(%04x:%02x:%02x.%x) failed: %m",
-                     __func__, vdev->host.domain, vdev->host.bus,
-                     vdev->host.slot, vdev->host.function);
+        error_report("%s(%s) failed: %m", __func__, vdev->vbasedev.name);
         return;
     }
 
@@ -927,29 +921,18 @@ static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
 
     if (vfio_blacklist_opt_rom(vdev)) {
         if (dev->opts && qemu_opt_get(dev->opts, "rombar")) {
-            error_printf("Warning : Device at %04x:%02x:%02x.%x "
-                         "is known to cause system instability issues during "
-                         "option rom execution. "
-                         "Proceeding anyway since user specified non zero 
value for "
-                         "rombar\n",
-                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
-                         vdev->host.function);
+            error_printf("Warning : Device at %s is known to cause system 
instability issues during option rom execution. Proceeding anyway since user 
specified non zero value for rombar\n",
+                         vdev->vbasedev.name);
         } else {
-            error_printf("Warning : Rom loading for device at "
-                         "%04x:%02x:%02x.%x has been disabled due to "
-                         "system instability issues. "
-                         "Specify rombar=1 or romfile to force\n",
-                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
-                         vdev->host.function);
+            error_printf("Warning : Rom loading for device at %s has been 
disabled due to system instability issues. Specify rombar=1 or romfile to 
force\n",
+                         vdev->vbasedev.name);
             return;
         }
     }
 
     trace_vfio_pci_size_rom(vdev->vbasedev.name, size);
 
-    snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom",
-             vdev->host.domain, vdev->host.bus, vdev->host.slot,
-             vdev->host.function);
+    snprintf(name, sizeof(name), "vfio[%s].rom", vdev->vbasedev.name);
 
     memory_region_init_io(&vdev->pdev.rom, OBJECT(vdev),
                           &vfio_rom_ops, vdev, name, size);
@@ -1063,9 +1046,8 @@ uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t 
addr, int len)
         ret = pread(vdev->vbasedev.fd, &phys_val, len,
                     vdev->config_offset + addr);
         if (ret != len) {
-            error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %m",
-                         __func__, vdev->host.domain, vdev->host.bus,
-                         vdev->host.slot, vdev->host.function, addr, len);
+            error_report("%s(%s, 0x%x, 0x%x) failed: %m",
+                         __func__, vdev->vbasedev.name, addr, len);
             return -errno;
         }
         phys_val = le32_to_cpu(phys_val);
@@ -1089,9 +1071,8 @@ void vfio_pci_write_config(PCIDevice *pdev,
     /* Write everything to VFIO, let it filter out what we can't write */
     if (pwrite(vdev->vbasedev.fd, &val_le, len, vdev->config_offset + addr)
                 != len) {
-        error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %m",
-                     __func__, vdev->host.domain, vdev->host.bus,
-                     vdev->host.slot, vdev->host.function, addr, val, len);
+        error_report("%s(%s, 0x%x, 0x%x, 0x%x) failed: %m",
+                     __func__, vdev->vbasedev.name, addr, val, len);
     }
 
     /* MSI/MSI-X Enabling/Disabling */
@@ -1383,9 +1364,7 @@ static void vfio_map_bar(VFIOPCIDevice *vdev, int nr)
         return;
     }
 
-    snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d",
-             vdev->host.domain, vdev->host.bus, vdev->host.slot,
-             vdev->host.function, nr);
+    snprintf(name, sizeof(name), "VFIO %s BAR %d", vdev->vbasedev.name, nr);
 
     /* Determine what type of BAR this is for registration */
     ret = pread(vdev->vbasedev.fd, &pci_bar, sizeof(pci_bar),
@@ -1756,9 +1735,8 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t 
pos)
     }
 
     if (ret < 0) {
-        error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability "
-                     "address@hidden: %d", vdev->host.domain,
-                     vdev->host.bus, vdev->host.slot, vdev->host.function,
+        error_report("vfio: %s Error adding PCI capability "
+                     "address@hidden: %d", vdev->vbasedev.name,
                      cap_id, size, pos, ret);
         return ret;
     }
@@ -1820,11 +1798,14 @@ static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
     vfio_intx_enable(vdev);
 }
 
-static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
-                                PCIHostDeviceAddress *host2)
+static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name)
 {
-    return (host1->domain == host2->domain && host1->bus == host2->bus &&
-            host1->slot == host2->slot && host1->function == host2->function);
+    char tmp[13];
+
+    sprintf(tmp, "%04x:%02x:%02x.%1x", addr->domain,
+            addr->bus, addr->slot, addr->function);
+
+    return (strcmp(tmp, name) == 0);
 }
 
 static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single)
@@ -1849,9 +1830,8 @@ static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool 
single)
     if (ret && errno != ENOSPC) {
         ret = -errno;
         if (!vdev->has_pm_reset) {
-            error_report("vfio: Cannot reset device %04x:%02x:%02x.%x, "
-                         "no available reset mechanism.", vdev->host.domain,
-                         vdev->host.bus, vdev->host.slot, vdev->host.function);
+            error_report("vfio: Cannot reset device %s, "
+                         "no available reset mechanism.", vdev->vbasedev.name);
         }
         goto out_single;
     }
@@ -1884,7 +1864,7 @@ static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool 
single)
         trace_vfio_pci_hot_reset_dep_devices(host.domain,
                 host.bus, host.slot, host.function, devices[i].group_id);
 
-        if (vfio_pci_host_match(&host, &vdev->host)) {
+        if (vfio_pci_host_match(&host, vdev->vbasedev.name)) {
             continue;
         }
 
@@ -1910,7 +1890,7 @@ static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool 
single)
                 continue;
             }
             tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
-            if (vfio_pci_host_match(&host, &tmp->host)) {
+            if (vfio_pci_host_match(&host, tmp->vbasedev.name)) {
                 if (single) {
                     ret = -EINVAL;
                     goto out_single;
@@ -1972,7 +1952,7 @@ out:
         host.slot = PCI_SLOT(devices[i].devfn);
         host.function = PCI_FUNC(devices[i].devfn);
 
-        if (vfio_pci_host_match(&host, &vdev->host)) {
+        if (vfio_pci_host_match(&host, vdev->vbasedev.name)) {
             continue;
         }
 
@@ -1991,7 +1971,7 @@ out:
                 continue;
             }
             tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
-            if (vfio_pci_host_match(&host, &tmp->host)) {
+            if (vfio_pci_host_match(&host, tmp->vbasedev.name)) {
                 vfio_pci_post_reset(tmp);
                 break;
             }
@@ -2197,10 +2177,7 @@ static void vfio_err_notifier_handler(void *opaque)
      * guest to contain the error.
      */
 
-    error_report("%s(%04x:%02x:%02x.%x) Unrecoverable error detected.  "
-                 "Please collect any data possible and then kill the guest",
-                 __func__, vdev->host.domain, vdev->host.bus,
-                 vdev->host.slot, vdev->host.function);
+    error_report("%s(%s) Unrecoverable error detected. Please collect any data 
possible and then kill the guest", __func__, vdev->vbasedev.name);
 
     vm_stop(RUN_STATE_INTERNAL_ERROR);
 }
@@ -2381,42 +2358,43 @@ static int vfio_initfn(PCIDevice *pdev)
     VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
     VFIODevice *vbasedev_iter;
     VFIOGroup *group;
-    char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
+    char *tmp, group_path[PATH_MAX], *group_name;
     ssize_t len;
     struct stat st;
     int groupid;
     int ret;
 
-    /* Check that the host device exists */
-    snprintf(path, sizeof(path),
-             "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/",
-             vdev->host.domain, vdev->host.bus, vdev->host.slot,
-             vdev->host.function);
-    if (stat(path, &st) < 0) {
-        error_report("vfio: error: no such host device: %s", path);
+    if (!vdev->vbasedev.sysfsdev) {
+        vdev->vbasedev.sysfsdev =
+            g_strdup_printf("/sys/bus/pci/devices/%04x:%02x:%02x.%01x",
+                            vdev->host.domain, vdev->host.bus,
+                            vdev->host.slot, vdev->host.function);
+    }
+
+    if (stat(vdev->vbasedev.sysfsdev, &st) < 0) {
+        error_report("vfio: error: no such host device: %s",
+                     vdev->vbasedev.sysfsdev);
         return -errno;
     }
 
+    vdev->vbasedev.name = g_strdup(basename(vdev->vbasedev.sysfsdev));
     vdev->vbasedev.ops = &vfio_pci_ops;
-
     vdev->vbasedev.type = VFIO_DEVICE_TYPE_PCI;
-    vdev->vbasedev.name = g_strdup_printf("%04x:%02x:%02x.%01x",
-                                          vdev->host.domain, vdev->host.bus,
-                                          vdev->host.slot, 
vdev->host.function);
 
-    strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1);
+    tmp = g_strdup_printf("%s/iommu_group", vdev->vbasedev.sysfsdev);
+    len = readlink(tmp, group_path, sizeof(group_path));
+    g_free(tmp);
 
-    len = readlink(path, iommu_group_path, sizeof(path));
-    if (len <= 0 || len >= sizeof(path)) {
+    if (len <= 0 || len >= sizeof(group_path)) {
         error_report("vfio: error no iommu_group for device");
         return len < 0 ? -errno : -ENAMETOOLONG;
     }
 
-    iommu_group_path[len] = 0;
-    group_name = basename(iommu_group_path);
+    group_path[len] = 0;
 
+    group_name = basename(group_path);
     if (sscanf(group_name, "%d", &groupid) != 1) {
-        error_report("vfio: error reading %s: %m", path);
+        error_report("vfio: error reading %s: %m", group_path);
         return -errno;
     }
 
@@ -2428,21 +2406,18 @@ static int vfio_initfn(PCIDevice *pdev)
         return -ENOENT;
     }
 
-    snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x",
-            vdev->host.domain, vdev->host.bus, vdev->host.slot,
-            vdev->host.function);
-
     QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
         if (strcmp(vbasedev_iter->name, vdev->vbasedev.name) == 0) {
-            error_report("vfio: error: device %s is already attached", path);
+            error_report("vfio: error: device %s is already attached",
+                         vdev->vbasedev.name);
             vfio_put_group(group);
             return -EBUSY;
         }
     }
 
-    ret = vfio_get_device(group, path, &vdev->vbasedev);
+    ret = vfio_get_device(group, vdev->vbasedev.name, &vdev->vbasedev);
     if (ret) {
-        error_report("vfio: failed to get device %s", path);
+        error_report("vfio: failed to get device %s", vdev->vbasedev.name);
         vfio_put_group(group);
         return ret;
     }
@@ -2659,6 +2634,7 @@ static void vfio_instance_init(Object *obj)
 
 static Property vfio_pci_dev_properties[] = {
     DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIOPCIDevice, host),
+    DEFINE_PROP_STRING("sysfsdev", VFIOPCIDevice, vbasedev.sysfsdev),
     DEFINE_PROP_UINT32("x-intx-mmap-timeout-ms", VFIOPCIDevice,
                        intx.mmap_timeout, 1100),
     DEFINE_PROP_BIT("x-vga", VFIOPCIDevice, features,
diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
index ebc9dcb..6c8b54a 100644
--- a/hw/vfio/platform.c
+++ b/hw/vfio/platform.c
@@ -560,38 +560,45 @@ static int vfio_base_device_init(VFIODevice *vbasedev)
 {
     VFIOGroup *group;
     VFIODevice *vbasedev_iter;
-    char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
+    char *tmp, group_path[PATH_MAX], *group_name;
     ssize_t len;
     struct stat st;
     int groupid;
     int ret;
 
-    /* name must be set prior to the call */
-    if (!vbasedev->name || strchr(vbasedev->name, '/')) {
-        return -EINVAL;
-    }
+    /* @sysfsdev takes precedence over @host */
+    if (vbasedev->sysfsdev) {
+        g_free(vbasedev->name);
+        vbasedev->name = g_strdup(basename(vbasedev->sysfsdev));
+    } else {
+        if (!vbasedev->name || strchr(vbasedev->name, '/')) {
+            return -EINVAL;
+        }
 
-    /* Check that the host device exists */
-    g_snprintf(path, sizeof(path), "/sys/bus/platform/devices/%s/",
-               vbasedev->name);
+        vbasedev->sysfsdev = g_strdup_printf("/sys/bus/platform/devices/%s",
+                                             vbasedev->name);
+    }
 
-    if (stat(path, &st) < 0) {
-        error_report("vfio: error: no such host device: %s", path);
+    if (stat(vbasedev->sysfsdev, &st) < 0) {
+        error_report("vfio: error: no such host device: %s",
+                     vbasedev->sysfsdev);
         return -errno;
     }
 
-    g_strlcat(path, "iommu_group", sizeof(path));
-    len = readlink(path, iommu_group_path, sizeof(iommu_group_path));
-    if (len < 0 || len >= sizeof(iommu_group_path)) {
+    tmp = g_strdup_printf("%s/iommu_group", vbasedev->sysfsdev);
+    len = readlink(tmp, group_path, sizeof(group_path));
+    g_free(tmp);
+
+    if (len < 0 || len >= sizeof(group_path)) {
         error_report("vfio: error no iommu_group for device");
         return len < 0 ? -errno : -ENAMETOOLONG;
     }
 
-    iommu_group_path[len] = 0;
-    group_name = basename(iommu_group_path);
+    group_path[len] = 0;
 
+    group_name = basename(group_path);
     if (sscanf(group_name, "%d", &groupid) != 1) {
-        error_report("vfio: error reading %s: %m", path);
+        error_report("vfio: error reading %s: %m", group_path);
         return -errno;
     }
 
@@ -603,25 +610,24 @@ static int vfio_base_device_init(VFIODevice *vbasedev)
         return -ENOENT;
     }
 
-    g_snprintf(path, sizeof(path), "%s", vbasedev->name);
-
     QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
         if (strcmp(vbasedev_iter->name, vbasedev->name) == 0) {
-            error_report("vfio: error: device %s is already attached", path);
+            error_report("vfio: error: device %s is already attached",
+                         vbasedev->name);
             vfio_put_group(group);
             return -EBUSY;
         }
     }
-    ret = vfio_get_device(group, path, vbasedev);
+    ret = vfio_get_device(group, vbasedev->name, vbasedev);
     if (ret) {
-        error_report("vfio: failed to get device %s", path);
+        error_report("vfio: failed to get device %s", vbasedev->name);
         vfio_put_group(group);
         return ret;
     }
 
     ret = vfio_populate_device(vbasedev);
     if (ret) {
-        error_report("vfio: failed to populate device %s", path);
+        error_report("vfio: failed to populate device %s", vbasedev->name);
         vfio_put_group(group);
     }
 
@@ -681,7 +687,9 @@ static void vfio_platform_realize(DeviceState *dev, Error 
**errp)
     vbasedev->type = VFIO_DEVICE_TYPE_PLATFORM;
     vbasedev->ops = &vfio_platform_ops;
 
-    trace_vfio_platform_realize(vbasedev->name, vdev->compat);
+    trace_vfio_platform_realize(vbasedev->sysfsdev ?
+                                vbasedev->sysfsdev : vbasedev->name,
+                                vdev->compat);
 
     ret = vfio_base_device_init(vbasedev);
     if (ret) {
@@ -703,6 +711,7 @@ static const VMStateDescription vfio_platform_vmstate = {
 
 static Property vfio_platform_dev_properties[] = {
     DEFINE_PROP_STRING("host", VFIOPlatformDevice, vbasedev.name),
+    DEFINE_PROP_STRING("sysfsdev", VFIOPlatformDevice, vbasedev.sysfsdev),
     DEFINE_PROP_BOOL("x-no-mmap", VFIOPlatformDevice, vbasedev.no_mmap, false),
     DEFINE_PROP_UINT32("mmap-timeout-ms", VFIOPlatformDevice,
                        mmap_timeout, 1100),
diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index f037f3c..7e00ffc 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -89,6 +89,7 @@ typedef struct VFIODeviceOps VFIODeviceOps;
 typedef struct VFIODevice {
     QLIST_ENTRY(VFIODevice) next;
     struct VFIOGroup *group;
+    char *sysfsdev;
     char *name;
     int fd;
     int type;