qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC 07/12] spapr_pci: Fold spapr_phb_vfio_eeh_set_option()


From: David Gibson
Subject: [Qemu-devel] [RFC 07/12] spapr_pci: Fold spapr_phb_vfio_eeh_set_option() into spapr_pci code
Date: Thu, 19 Nov 2015 15:29:23 +1100

Simplify the sPAPR PCI code by folding spapr_phb_eeh_set_option() into
rtas_ibm_set_eeh_option().

Signed-off-by: David Gibson <address@hidden>
---
 hw/ppc/spapr_pci.c          | 43 +++++++++++++++++++++++++++++++++++++++--
 hw/ppc/spapr_pci_vfio.c     | 47 ---------------------------------------------
 include/hw/pci-host/spapr.h |  4 ----
 3 files changed, 41 insertions(+), 53 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index a13eff3..d4cae05 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -442,6 +442,7 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
     sPAPRPHBState *sphb;
     uint32_t addr, option;
     uint64_t buid;
+    uint32_t op;
     int ret;
 
     if ((nargs != 4) || (nret != 1)) {
@@ -461,8 +462,46 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    ret = spapr_phb_vfio_eeh_set_option(sphb, addr, option);
-    rtas_st(rets, 0, ret);
+    switch (option) {
+    case RTAS_EEH_DISABLE:
+        op = VFIO_EEH_PE_DISABLE;
+        break;
+    case RTAS_EEH_ENABLE: {
+        PCIHostState *phb;
+        PCIDevice *pdev;
+
+        /*
+         * The EEH functionality is enabled on basis of PCI device,
+         * instead of PE. We need check the validity of the PCI
+         * device address.
+         */
+        phb = PCI_HOST_BRIDGE(sphb);
+        pdev = pci_find_device(phb->bus,
+                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
+        if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+            goto param_error_exit;
+        }
+
+        op = VFIO_EEH_PE_ENABLE;
+        break;
+    }
+    case RTAS_EEH_THAW_IO:
+        op = VFIO_EEH_PE_UNFREEZE_IO;
+        break;
+    case RTAS_EEH_THAW_DMA:
+        op = VFIO_EEH_PE_UNFREEZE_DMA;
+        break;
+    default:
+        goto param_error_exit;
+    }
+
+    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
+    if (ret < 0) {
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
     return;
 
 param_error_exit:
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index 8ca9fb3..9aacf4b 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -88,53 +88,6 @@ void spapr_phb_vfio_reset(DeviceState *qdev)
     spapr_phb_vfio_eeh_reenable(SPAPR_PCI_HOST_BRIDGE(qdev));
 }
 
-int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
-                                  unsigned int addr, int option)
-{
-    uint32_t op;
-    int ret;
-
-    switch (option) {
-    case RTAS_EEH_DISABLE:
-        op = VFIO_EEH_PE_DISABLE;
-        break;
-    case RTAS_EEH_ENABLE: {
-        PCIHostState *phb;
-        PCIDevice *pdev;
-
-        /*
-         * The EEH functionality is enabled on basis of PCI device,
-         * instead of PE. We need check the validity of the PCI
-         * device address.
-         */
-        phb = PCI_HOST_BRIDGE(sphb);
-        pdev = pci_find_device(phb->bus,
-                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
-        if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
-            return RTAS_OUT_PARAM_ERROR;
-        }
-
-        op = VFIO_EEH_PE_ENABLE;
-        break;
-    }
-    case RTAS_EEH_THAW_IO:
-        op = VFIO_EEH_PE_UNFREEZE_IO;
-        break;
-    case RTAS_EEH_THAW_DMA:
-        op = VFIO_EEH_PE_UNFREEZE_DMA;
-        break;
-    default:
-        return RTAS_OUT_PARAM_ERROR;
-    }
-
-    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
-    if (ret < 0) {
-        return RTAS_OUT_HW_ERROR;
-    }
-
-    return RTAS_OUT_SUCCESS;
-}
-
 static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 55237fc..d32750e 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -135,8 +135,4 @@ PCIDevice *spapr_pci_find_dev(sPAPRMachineState *spapr, 
uint64_t buid,
                               uint32_t config_addr);
 void spapr_phb_vfio_reset(DeviceState *qdev);
 
-/* VFIO EEH hooks */
-int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
-                                  unsigned int addr, int option);
-
 #endif /* __HW_SPAPR_PCI_H__ */
-- 
2.5.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]