qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm


From: Gabriel L. Somlo
Subject: [Qemu-devel] [PATCH v5 0/5] add ACPI node for fw_cfg on pc and arm
Date: Fri, 13 Nov 2015 21:57:13 -0500

New since v4:

        - rebased on top of Marc's DMA series
        - drop machine compat dependency for insertion into x86/ssdt
          (patch 3/5), following agreement between Igor and Eduardo
        - [mm]io register range now covers DMA register as well, if
          available.
        - s/bios/firmware in doc file updates

Thanks,
  --Gabriel

>New since v3:
>
>       - rebased to work on top of 87e896ab (introducing pc-*-25 classes),
>         inserting fw_cfg acpi node only for machines >= 2.5.
>
>       - reintroduce _STA with value 0x0B (bit 2 for u/i visibility turned
>         off to avoid Windows complaining -- thanks Igor for catching that!)
>
>If there's any other feedback besides questions regarding the
>appropriateness of "QEMU0002" as the value of _HID, please don't hesitate!
>
>>New since v2:
>>
>>      - pc/i386 node in ssdt only on machine types *newer* than 2.4
>>        (as suggested by Eduardo)
>>
>>I appreciate any further comments and reviews. Hopefully we can make
>>this palatable for upstream, modulo the lingering concerns about whether
>>"QEMU0002" is ok to use as the value of _HID, which I'll hopefully get
>>sorted out with the kernel crew...
>>
>>>New since v1:
>>>
>>>     - expose control register size (suggested by Marc MarĂ­)
>>>
>>>     - leaving out _UID and _STA fields (thanks Shannon & Igor)
>>>
>>>     - using "QEMU0002" as the value of _HID (thanks Michael)
>>>
>>>     - added documentation blurb to docs/specs/fw_cfg.txt
>>>       (mainly to record usage of the "QEMU0002" string with fw_cfg).
>>>
>>>> This series adds a fw_cfg device node to the SSDT (on pc), or to the
>>>> DSDT (on arm).
>>>>
>>>>    - Patch 1/3 moves (and renames) the BIOS_CFG_IOPORT (0x510)
>>>>      define from pc.c to pc.h, so that it could be used from
>>>>      acpi-build.c in patch 2/3.
>>>> 
>>>>    - Patch 2/3 adds a fw_cfg node to the pc SSDT.
>>>> 
>>>>    - Patch 3/3 adds a fw_cfg node to the arm DSDT.
>>>>
>>>> I made up some names - "FWCF" for the node name, and "FWCF0001"
>>>> for _HID; no idea whether that's appropriate, or how else I should
>>>> figure out what to use instead...
>>>>
>>>> Also, using scope "\\_SB", based on where fw_cfg shows up in the
>>>> output of "info qtree". Again, if that's wrong, please point me in
>>>> the right direction.
>>>>
>>>> Re. 3/3 (also mentioned after the commit blurb in the patch itself),
>>>> I noticed none of the other DSDT entries contain a _STA field, wondering
>>>> why it would (not) make sense to include that, same as on the PC.
Gabriel L. Somlo (5):
  fw_cfg: expose control register size in fw_cfg.h
  pc: fw_cfg: move ioport base constant to pc.h
  acpi: pc: add fw_cfg device node to ssdt
  acpi: arm: add fw_cfg device node to dsdt
  fw_cfg: document ACPI device node information

 docs/specs/fw_cfg.txt     |  9 +++++++++
 hw/arm/virt-acpi-build.c  | 15 +++++++++++++++
 hw/i386/acpi-build.c      | 29 +++++++++++++++++++++++++++++
 hw/i386/pc.c              |  5 ++---
 hw/nvram/fw_cfg.c         |  4 +++-
 include/hw/i386/pc.h      |  2 ++
 include/hw/nvram/fw_cfg.h |  3 +++
 7 files changed, 63 insertions(+), 4 deletions(-)

-- 
2.4.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]