[Qemu-devel] [PATCH v3 0/5] Connect the SPI devices to ZynqMP

[Alistair Francis]

Connect the SPI devices to Xilinx's ZynqMP.

I also need to make some changes to the actual SPI device to
imporove the fuctionality, but for the time being this works.

V3:
 - Don't reach into the SoC to get the SPI Bus
V2:
 - Connect the SPI flash in the board code
 - Update git patches to properly indicate rename
 - Add sst25wf080 as a SPI flash


Alistair Francis (5):
  m25p80.c: Add sst25wf080 SPI flash device
  ssi: Move ssi.h into a separate directory
  xilinx_spips: Seperate the state struct into a header
  xlnx-zynqmp: Connect the SPI devices
  xlnx-ep108: Connect the SPI Flash

 hw/arm/pxa2xx.c                     |  2 +-
 hw/arm/spitz.c                      |  2 +-
 hw/arm/stellaris.c                  |  2 +-
 hw/arm/strongarm.c                  |  2 +-
 hw/arm/tosa.c                       |  2 +-
 hw/arm/xilinx_zynq.c                |  2 +-
 hw/arm/xlnx-ep108.c                 | 19 ++++++++++
 hw/arm/xlnx-zynqmp.c                | 37 +++++++++++++++++++
 hw/arm/z2.c                         |  2 +-
 hw/block/m25p80.c                   |  3 +-
 hw/display/ads7846.c                |  2 +-
 hw/display/ssd0323.c                |  2 +-
 hw/microblaze/petalogix_ml605_mmu.c |  2 +-
 hw/misc/max111x.c                   |  2 +-
 hw/sd/ssi-sd.c                      |  2 +-
 hw/ssi/pl022.c                      |  2 +-
 hw/ssi/ssi.c                        |  2 +-
 hw/ssi/xilinx_spi.c                 |  2 +-
 hw/ssi/xilinx_spips.c               | 56 ++++------------------------
 include/hw/arm/xlnx-zynqmp.h        |  4 ++
 include/hw/{ => ssi}/ssi.h          | 10 +++--
 include/hw/ssi/xilinx_spips.h       | 74 +++++++++++++++++++++++++++++++++++++
 22 files changed, 165 insertions(+), 68 deletions(-)
 rename include/hw/{ => ssi}/ssi.h (96%)
 create mode 100644 include/hw/ssi/xilinx_spips.h

-- 
2.5.0