On Tue, 2015-10-27 at 20:51 +0800, Cao jin wrote:
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will got the notification to scan the slot.
Signed-off-by: Cao jin <address@hidden>
---
hw/pci/pci.c | 40 +++++++++++++++++++++++++++++++++++++++-
hw/pci/pci_host.c | 13 +++++++++++--
hw/pci/pcie.c | 18 +++++++++---------
include/hw/pci/pci.h | 1 +
4 files changed, 60 insertions(+), 12 deletions(-)
diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
index 3e26f92..63d7d2f 100644
--- a/hw/pci/pci_host.c
+++ b/hw/pci/pci_host.c
@@ -20,6 +20,7 @@
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
+#include "hw/pci/pci_bus.h"
#include "trace.h"
/* debug PCI */
@@ -75,7 +76,11 @@ void pci_data_write(PCIBus *s, uint32_t addr, uint32_t val,
int len)
PCIDevice *pci_dev = pci_dev_find_by_addr(s, addr);
uint32_t config_addr = addr & (PCI_CONFIG_SPACE_SIZE - 1);
- if (!pci_dev) {
+ /* non-zero functions are only exposed when function 0 is present,
+ * allowing direct removal of unexposed functions.
+ */
+ if (!pci_dev ||
+ (pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev))) {
return;
}
@@ -91,7 +96,11 @@ uint32_t pci_data_read(PCIBus *s, uint32_t addr, int len)
uint32_t config_addr = addr & (PCI_CONFIG_SPACE_SIZE - 1);
uint32_t val;
- if (!pci_dev) {
+ /* non-zero functions are only exposed when function 0 is present,
+ * allowing direct removal of unexposed functions.
+ */
+ if (!pci_dev ||
+ (pci_dev->qdev.hotplugged && !pci_get_function_0(pci_dev))) {
return ~0x0;
}
Don't we need to do this in pci_host_config_read_common() and
pci_host_config_write_common() instead? Otherwise I don't think we
catch config access via mmcfg. Thanks,