[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 3/8] i.MX: Standardize i.MX I2C debug
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH v3 3/8] i.MX: Standardize i.MX I2C debug |
Date: |
Sat, 24 Oct 2015 18:47:56 -0700 |
On Sat, Oct 24, 2015 at 1:15 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> The goal is to have debug code always compiled during build.
>
> We standardize all debug output on the following format:
>
> [QOM_TYPE_NAME]reporting_function: debug message
>
> We also replace IPRINTF with qemu_log_mask(). The qemu_log_mask() output
> is following the same format as the above debug.
>
Dropping this,
Reviewed-by: Peter Crosthwaite <address@hidden>
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
> * use HWADDR_PRIx for address formating
> * standardize qemu_log_mask on same model.
>
> Changes since v2:
> * None
>
> hw/i2c/imx_i2c.c | 43 ++++++++++++++++++++++---------------------
> 1 file changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/hw/i2c/imx_i2c.c b/hw/i2c/imx_i2c.c
> index 8474872..cb62c7a 100644
> --- a/hw/i2c/imx_i2c.c
> +++ b/hw/i2c/imx_i2c.c
> @@ -21,13 +21,17 @@
> #include "hw/i2c/imx_i2c.h"
> #include "hw/i2c/i2c.h"
>
> -#ifndef IMX_I2C_DEBUG
> -#define IMX_I2C_DEBUG 0
> +#ifndef DEBUG_IMX_I2C
> +#define DEBUG_IMX_I2C 0
> #endif
>
> -#if IMX_I2C_DEBUG
> -#define DPRINT(fmt, args...) \
> - do { fprintf(stderr, "%s: "fmt, __func__, ## args); } while (0)
> +#define DPRINTF(fmt, args...) \
> + do { \
> + if (DEBUG_IMX_I2C) { \
> + fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_I2C, \
> + __func__, ##args); \
> + } \
> + } while (0)
>
> static const char *imx_i2c_get_regname(unsigned offset)
> {
> @@ -46,9 +50,6 @@ static const char *imx_i2c_get_regname(unsigned offset)
> return "[?]";
> }
> }
> -#else
> -#define DPRINT(fmt, args...) do { } while (0)
> -#endif
>
> static inline bool imx_i2c_is_enabled(IMXI2CState *s)
> {
> @@ -121,11 +122,11 @@ static uint64_t imx_i2c_read(void *opaque, hwaddr
> offset,
>
> if (s->address == ADDR_RESET) {
> /* something is wrong as the address is not set */
> - qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Trying to read "
> + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read "
> "without specifying the slave address\n",
> TYPE_IMX_I2C, __func__);
> } else if (s->i2cr & I2CR_MTX) {
> - qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Trying to read "
> + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read "
> "but MTX is set\n", TYPE_IMX_I2C, __func__);
> } else {
> /* get the next byte */
> @@ -134,7 +135,7 @@ static uint64_t imx_i2c_read(void *opaque, hwaddr offset,
> if (ret >= 0) {
> imx_i2c_raise_interrupt(s);
> } else {
> - qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: read failed "
> + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: read failed "
> "for device 0x%02x\n", TYPE_IMX_I2C,
> __func__, s->address);
> ret = 0xff;
> @@ -143,19 +144,19 @@ static uint64_t imx_i2c_read(void *opaque, hwaddr
> offset,
>
> s->i2dr_read = ret;
> } else {
> - qemu_log_mask(LOG_UNIMP, "%s[%s]: slave mode not implemented\n",
> + qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
> TYPE_IMX_I2C, __func__);
> }
> break;
> default:
> - qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Bad address at offset %d\n",
> - TYPE_IMX_I2C, __func__, s->address);
> + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
> + HWADDR_PRIx "\n", TYPE_IMX_I2C, __func__, offset);
> value = 0;
> break;
> }
>
> - DPRINT("read %s [0x%02x] -> 0x%02x\n", imx_i2c_get_regname(offset),
> - (unsigned int)offset, value);
> + DPRINTF("read %s [0x%" HWADDR_PRIx "] -> 0x%02x\n",
> + imx_i2c_get_regname(offset), offset, value);
>
> return (uint64_t)value;
> }
> @@ -165,8 +166,8 @@ static void imx_i2c_write(void *opaque, hwaddr offset,
> {
> IMXI2CState *s = IMX_I2C(opaque);
>
> - DPRINT("write %s [0x%02x] <- 0x%02x\n", imx_i2c_get_regname(offset),
> - (unsigned int)offset, (int)value);
> + DPRINTF("write %s [0x%" HWADDR_PRIx "] <- 0x%02x\n",
> + imx_i2c_get_regname(offset), offset, (int)value);
>
> value &= 0xff;
>
> @@ -264,13 +265,13 @@ static void imx_i2c_write(void *opaque, hwaddr offset,
> }
> }
> } else {
> - qemu_log_mask(LOG_UNIMP, "%s[%s]: slave mode not implemented\n",
> + qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
> TYPE_IMX_I2C, __func__);
> }
> break;
> default:
> - qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Bad address at offset %d\n",
> - TYPE_IMX_I2C, __func__, s->address);
> + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
> + HWADDR_PRIx "\n", TYPE_IMX_I2C, __func__, offset);
> break;
> }
> }
> --
> 2.5.0
>
- [Qemu-devel] [PATCH v3 0/8] i.MX: Standardize debug code, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 2/8] i.MX: Standardize i.MX GPIO debug, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 1/8] i.MX: Standardize i.MX serial debug., Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 3/8] i.MX: Standardize i.MX I2C debug, Jean-Christophe Dubois, 2015/10/24
- Re: [Qemu-devel] [PATCH v3 3/8] i.MX: Standardize i.MX I2C debug,
Peter Crosthwaite <=
- [Qemu-devel] [PATCH v3 7/8] i.MX: Standardize i.MX EPIT debug, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 4/8] i.MX: Standardize i.MX AVIC debug, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 5/8] i.MX: Standardize i.MX CCM debug, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 6/8] i.MX: Standardize i.MX FEC debug, Jean-Christophe Dubois, 2015/10/24
- [Qemu-devel] [PATCH v3 8/8] i.MX: Standardize i.MX GPT debug, Jean-Christophe Dubois, 2015/10/24