[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/8] i.MX: Standardize i.MX serial debug.
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH 1/8] i.MX: Standardize i.MX serial debug. |
Date: |
Tue, 20 Oct 2015 16:02:55 -0700 |
On Tue, Oct 20, 2015 at 2:19 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> The goal is to have debug code always compiled during build.
>
Elaborate message to indicate that you convert some messages to
LOG_GUEST_ERROR and LOG_UNIMP as appropriate, obsoleting the need for
IPRINTF.
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
> hw/char/imx_serial.c | 39 +++++++++++++++++----------------------
> 1 file changed, 17 insertions(+), 22 deletions(-)
>
> diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
> index f0c4c72..08274e0 100644
> --- a/hw/char/imx_serial.c
> +++ b/hw/char/imx_serial.c
> @@ -22,25 +22,17 @@
> #include "sysemu/sysemu.h"
> #include "sysemu/char.h"
>
> -//#define DEBUG_SERIAL 1
> -#ifdef DEBUG_SERIAL
> -#define DPRINTF(fmt, args...) \
> -do { printf("%s: " fmt , TYPE_IMX_SERIAL, ##args); } while (0)
> -#else
> -#define DPRINTF(fmt, args...) do {} while (0)
> +#ifndef DEBUG_IMX_UART
> +#define DEBUG_IMX_UART 0
> #endif
>
> -/*
> - * Define to 1 for messages about attempts to
> - * access unimplemented registers or similar.
> - */
> -//#define DEBUG_IMPLEMENTATION 1
> -#ifdef DEBUG_IMPLEMENTATION
> -# define IPRINTF(fmt, args...) \
> - do { fprintf(stderr, "%s: " fmt, TYPE_IMX_SERIAL, ##args); } while (0)
> -#else
> -# define IPRINTF(fmt, args...) do {} while (0)
> -#endif
> +#define DPRINTF(fmt, args...) \
> + do { \
> + if (DEBUG_IMX_UART) { \
> + fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \
> + __func__, ##args); \
> + } \
> + } while (0)
>
> static const VMStateDescription vmstate_imx_serial = {
> .name = TYPE_IMX_SERIAL,
> @@ -115,7 +107,7 @@ static uint64_t imx_serial_read(void *opaque, hwaddr
> offset,
> IMXSerialState *s = (IMXSerialState *)opaque;
> uint32_t c;
>
> - DPRINTF("read(offset=%x)\n", offset >> 2);
> + DPRINTF("read(offset=%x)\n", (int)(offset >> 2));
rather than do argument casts, you case use HWADDR_PRIx to get the %
format correct for the target type.
Regards,
Peter
> switch (offset >> 2) {
> case 0x0: /* URXD */
> c = s->readbuff;
> @@ -167,7 +159,8 @@ static uint64_t imx_serial_read(void *opaque, hwaddr
> offset,
> return 0x0; /* TODO */
>
> default:
> - IPRINTF("%s: bad offset: 0x%x\n", __func__, (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Bad register at offset %d\n",
> + TYPE_IMX_SERIAL, __func__, (int)offset);
> return 0;
> }
> }
> @@ -179,7 +172,7 @@ static void imx_serial_write(void *opaque, hwaddr offset,
> unsigned char ch;
>
> DPRINTF("write(offset=%x, value = %x) to %s\n",
> - offset >> 2,
> + (int)(offset >> 2),
> (unsigned int)value, s->chr ? s->chr->label : "NODEV");
>
> switch (offset >> 2) {
> @@ -266,12 +259,14 @@ static void imx_serial_write(void *opaque, hwaddr
> offset,
>
> case 0x2d: /* UTS1 */
> case 0x23: /* UCR4 */
> - IPRINTF("Unimplemented Register %x written to\n", offset >> 2);
> + qemu_log_mask(LOG_UNIMP, "%s[%s]: Unimplemented reg %d\n",
> + TYPE_IMX_SERIAL, __func__, (int)(offset >> 2));
> /* TODO */
> break;
>
> default:
> - IPRINTF("%s: Bad offset 0x%x\n", __func__, (int)offset);
> + qemu_log_mask(LOG_GUEST_ERROR, "%s[%s]: Bad register at offset %d\n",
> + TYPE_IMX_SERIAL, __func__, (int)offset);
> }
> }
>
> --
> 2.1.4
>
- [Qemu-devel] [PATCH 0/8] i.MX: Standardize debug code, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 1/8] i.MX: Standardize i.MX serial debug., Jean-Christophe Dubois, 2015/10/20
- Re: [Qemu-devel] [PATCH 1/8] i.MX: Standardize i.MX serial debug.,
Peter Crosthwaite <=
- [Qemu-devel] [PATCH 2/8] i.MX: Standardize i.MX GPIO debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 3/8] i.MX: Standardize i.MX I2C debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 4/8] i.MX: Standardize i.MX AVIC debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 5/8] i.MX: Standardize i.MX CCM debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 7/8] i.MX: Standardize i.MX EPIT debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 8/8] i.MX: Standardize i.MX GPT debug, Jean-Christophe Dubois, 2015/10/20
- [Qemu-devel] [PATCH 6/8] i.MX: Standardize i.MX FEC debug, Jean-Christophe Dubois, 2015/10/20