[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1505759] Re: Usb passthrough of devices plugged to AMD
From: |
José Ramón Muñoz Pekkarinen |
Subject: |
[Qemu-devel] [Bug 1505759] Re: Usb passthrough of devices plugged to AMD FCH USB OHCI Controller failing on q35. |
Date: |
Mon, 19 Oct 2015 17:27:08 -0000 |
Finally, I tried several combination of ports for this, until I figure
out and arrangement that worked for me. Seems like the problem is that 2
hp usb devices cannot share the same bus, so no matter if it's using an
ohci controller, an ehci, controller, or even xhci, if the devices are
in the same bus, some fancy error will come to the screen, and no
keyboard and mouse turns up in the vm.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1505759
Title:
Usb passthrough of devices plugged to AMD FCH USB OHCI Controller
failing on q35.
Status in QEMU:
New
Bug description:
I'm trying to setup a q35 vm with windows 7 guest for vga passthrough.
The machine works well for this purpose, but the usb devices passed to
the vm does not. I receive the following errors on screen:
qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE]
libusb: error [_open_sysfs_attr} open
/sys/bus/usb/devices/3-5/bConfigurationValue failed ret=-1 errno=2
qemu-system-x86_64: libusb_release_interface: -4 [NO_DEVICE]
libusb: error [_open_sysfs_attr} open
/sys/bus/usb/devices/4-1/bConfigurationValue failed ret=-1 errno=2
Disabling IRQ #18
Disabling IRQ #17
And from the system log I can see the following:
Oct 13 20:13:25 koalita kernel: vfio-pci 0000:01:00.1: enabling device (0400
-> 0402)
Oct 13 20:13:29 koalita kernel: usb 3-5: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:30 koalita kernel: usb 4-1: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:30 koalita kernel: usb 10-2: reset low-speed USB device number 2
using xhci_hcd
Oct 13 20:13:31 koalita kernel: usb 10-2: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:31 koalita kernel: usb 10-2: ep 0x1 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:31 koalita kernel: usb 3-5: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:31 koalita kernel: usb 10-2: reset low-speed USB device number 2
using xhci_hcd
Oct 13 20:13:32 koalita kernel: usb 10-2: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:32 koalita kernel: usb 10-2: ep 0x1 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:32 koalita kernel: usb 4-1: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:33 koalita kernel: usb 3-5: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:33 koalita kernel: usb 4-1: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:34 koalita kernel: usb 3-5: reset low-speed USB device number 2
using ohci-pci
Oct 13 20:13:34 koalita kernel: usb 10-2: reset low-speed USB device number 2
using xhci_hcd
Oct 13 20:13:35 koalita kernel: usb 10-2: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:35 koalita kernel: usb 10-2: ep 0x1 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:35 koalita kernel: usb 10-2: reset low-speed USB device number 2
using xhci_hcd
Oct 13 20:13:35 koalita kernel: usb 10-2: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
Oct 13 20:13:35 koalita kernel: usb 10-2: ep 0x1 - rounding interval to 64
microframes, ep desc says 80 microframes
I tried to any combination of usb devices, and even disabling the ICH9
usb devices to make the setup looks close to the 440fx machine that is
working for me.
Version of qemu is 2.2.1(all newer versions fails on usb passthrough,
even in 440fx machines), and kernel is 4.1.8.
The script to launch it is the following:
qemu-system-x86_64 -enable-kvm -M q35 -vga none -cpu host -smp
3,cores=3,threads=1 -m 6144 \
-L /usr/x86_64-pc-linux-gnu/usr/share/qemu \
-nodefaults -nodefconfig \
-device ioh3420,multifunction=on,id=pcie \
-device
vfio-pci,host=01:00.0,addr=1c.0,x-vga=on,multifunction=on,bus=pcie \
-device vfio-pci,host=01:00.1,addr=1c.1,bus=pcie \
-netdev user,id=user.0 -device virtio-net-pci,netdev=user.0 \
-device usb-ehci,id=ehci -device nec-usb-xhci,id=xhci \
-usb -usbdevice host:03f0:134a -usbdevice host:03f0:0024 -usbdevice
host:0079:0006 \
-drive file=q35_win7.img,format=raw,cache=none,aio=native,if=virtio
Thanks!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1505759/+subscriptions